Register April 2013 No. 688
Chapter NR 538
APPENDIX I
Table 1A
Category 1 ASTM Water Leach Test - See PDF for table PDF
1 As provided under s. NR 538.06 (1), the testing program for materials other than ferrous foundry system sand, ferrous foundry slag and coal ash must be approved by the department prior to characterization. For other materials the department may modify the list of parameters required to be analyzed for and may establish standards on a material specific basis for additional parameters.
Note: All testing is to be conducted on a representative sample of a single industrial byproduct prior to commingling with other materials, unless otherwise approved by the department.
Table 1B
Category 1 Total Elemental Analysis - See PDF for table PDF
1 As provided under s. NR 538.06 (1), the testing program for materials other than ferrous foundry system sand, ferrous foundry slag and coal ash must be approved by the department prior to characterization. For other materials the department may modify the list of parameters required to be analyzed for and may establish standards on a material specific basis for additional parameters.
Note: All testing is to be conducted on a representative sample of a single industrial byproduct prior to commingling with other materials, unless otherwise approved by the department.
Table 2A
Category 2 and 3 ASTM Water Leach Test - See PDF for table PDF
1 As provided under s. NR 538.06 (1), the testing program for materials other than ferrous foundry system sand, ferrous foundry slag and coal ash must be approved by the department prior to characterization. For other materials the department may modify the list of parameters required to be analyzed for and may establish standards on a material specific basis for additional parameters.
Note: All testing is to be conducted on a representative sample of a single industrial byproduct prior to commingling with other materials, unless otherwise approved by the department.
Table 2B
Category 2 Total Elemental Analysis - See PDF for table PDF
1 As provided under s. NR 538.06 (1), the testing program for materials other than ferrous foundry slag, ferrous foundry slag and coal ash must be approved by the department prior to characterization. Also, for industrial byproducts not listed, department concurrence is necessary prior to classification as a category 2 industrial byproduct. For other materials the department may modify the list of parameters required to be analyzed for and may establish standards on a material specific basis for additional parameters. For these materials the total elemental analysis shall also include aluminum, antimony, barium, boron, cadmium, hexavalent chromium, cobalt, copper, lead, mercury, molybdenum, nickel, phenol, selenium, silver, strontium, thallium, vanadium and zinc, unless otherwise approved by the department.
2 If total polyaromatic hydrocarbons exceed 100 mg/kg, department concurrence is necessary prior to classification as a category 2 industrial byproduct.
Note: All testing is to be conducted on a representative sample of a single industrial byproduct prior to commingling with other materials, unless otherwise approved by the department.
Table 3
Category 4 ASTM Water Leach Test - See PDF for table PDF
1 As provided under s. NR 538.06 (1), the testing program for materials other than ferrous foundry system sand, ferrous foundry slag and coal ash must be approved by the department prior to characterization. For other materials the department may modify the list of parameters required to be analyzed for and may establish standards on a material specific basis for additional parameters.
Note: All testing is to be conducted on a representative sample of a single industrial byproduct prior to commingling with other materials, unless otherwise approved by the department.
Table 4
Beneficial Use Methods - See PDF for table PDF
Note: Refer to s. NR 538.10 for description of each beneficial use
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.