2017 WISCONSIN ACT 134
An Act to repeal 227.42 (4), 293.43 (2), 293.43 (3), 293.43 (4), 293.43 (5) and 293.50; to amend 20.370 (2) (gh), 70.375 (2) (b), 70.375 (4) (h), 281.35 (5) (e), 283.84 (3m), 293.01 (9), 293.01 (18), 293.13 (2) (b) (intro.), 293.13 (2) (b) 4., 293.13 (2) (b) 7., 293.13 (2) (c) (intro.), 293.13 (2) (c) 7., 293.15 (8), 293.31 (title), 293.31 (1), 293.31 (2), 293.31 (3), 293.31 (4), 293.43 (1), 293.43 (1m) (b), 293.49 (1) (a) (intro.), 293.51 (title), 293.51 (3), 293.55 (1) (c), 293.55 (1) (d), 293.65 (3) (b) and 293.81; to repeal and recreate 293.95; and to create 293.01 (2m), 293.15 (7m), 293.26, 293.31 (4m), 293.32 (4), 293.37 (5), 293.40, 293.43 (2m), 293.43 (3m), 293.43 (4m), 293.49 (1) (a) 2m., 293.495, 293.51 (1g), 293.51 (1m), 293.51 (1r), 293.51 (5) and 293.66 of the statutes; relating to: the regulation of nonferrous metallic mining, prospecting, exploration, and bulk sampling, repealing administrative rules relating to wetlands, granting rule-making authority, and making an appropriation.
The people of the state of Wisconsin, represented in senate and assembly, do enact as follows:
134,1
Section
1. 20.370 (2) (gh) of the statutes is amended to read:
20.370 (2) (gh) Nonferrous metallic mining regulation and administration. The amounts in the schedule for the administration, regulation, and enforcement of nonferrous metallic mining exploration, bulk sampling, prospecting, mining and mine reclamation activities under ch. 293. All moneys received under ch. 293 shall be credited to this appropriation.
134,1n
Section 1n. 70.375 (2) (b) of the statutes is amended to read:
70.375 (2) (b) The secretary may promulgate any rules necessary to implement the tax under ss. 70.37 to 70.39 and 70.395 (1e). In respect to mines not in operation on November 28, 1981, ss. 71.10 (1), 71.30 (1) and (2), 71.74 (2), (3), (9), (11) and (15), 71.77, 71.78, 71.80 (6), 71.83 (1) (a) 1. and 2. and (b) 2. and (2) (a) 3. and (b) 1. and 71.85 (2) apply to the administration of this section.
134,2
Section
2. 70.375 (4) (h) of the statutes is amended to read:
70.375 (4) (h) The cost of premiums for bonds required under s. 293.26 (9), 293.51, 295.45 (5), or 295.59.
134,3
Section
3. 227.42 (4) of the statutes is repealed.
134,4
Section
4. 281.35 (5) (e) of the statutes is amended to read:
281.35 (5) (e) Right to hearing. Except as provided in s. 227.42 (4), any Any person who receives notice of a denial or modification requirement under par. (c) is entitled to a contested case hearing under ch. 227 if the person requests the hearing within 30 days after receiving the notice.
134,5
Section
5. 283.84 (3m) of the statutes is amended to read:
283.84 (3m) A person engaged in mining, as defined in s. 293.01 (9) or 295.41 (26), prospecting, as defined in s. 293.01 (18), bulk sampling, as defined in s. 293.01 (2m) or 295.41 (7), or nonmetallic mining, as defined in s. 295.11 (3), may not enter into an agreement under sub. (1).
134,6
Section
6. 293.01 (2m) of the statutes is created to read:
293.01 (2m) “Bulk sampling” means excavating in a potential mining site by removing less than 10,000 tons of material, including overburden and any other material removed from any portion of the excavation site, for the purposes of obtaining site-specific data to assess the quality and quantity of the nonferrous metallic mineral deposits and of collecting data from and analyzing the excavated materials in order to prepare the application for a mining permit or for any other approval. Bulk sampling does not constitute prospecting within the meaning of sub. (18).
134,7
Section
7. 293.01 (9) of the statutes is amended to read:
293.01 (9) “Mining" or “mining operation" means all or part of the process involved in the mining of nonferrous metallic minerals, other than for exploration, bulk sampling, or prospecting, including commercial extraction, agglomeration, beneficiation, construction of roads, removal of overburden and the production of refuse.
134,8
Section
8. 293.01 (18) of the statutes is amended to read:
293.01 (18) “Prospecting" means engaging in the examination of an area for the purpose of determining the quality and quantity of nonferrous metallic minerals, other than for exploration or bulk sampling but including the obtaining of a nonferrous metallic mineral sample, by such physical means as excavating, trenching, construction of shafts, ramps and tunnels and other means, other than for exploration or bulk sampling, which the department, by rule, identifies, and the production of prospecting refuse and other associated activities. “Prospecting" shall not include such activities when the activities are, by themselves, intended for and capable of commercial exploitation of the underlying nonferrous ore body. However, the fact that prospecting activities and construction may have use ultimately in mining, if approved, shall not mean that prospecting activities and construction constitute mining within the meaning of sub. (9), provided such activities and construction are reasonably related to prospecting requirements.
134,9
Section
9. 293.13 (2) (b) (intro.) of the statutes is amended to read:
293.13 (2) (b) (intro.) Minimum standards for exploration, bulk sampling, prospecting, and mining shall include the following:
134,10
Section
10. 293.13 (2) (b) 4. of the statutes is amended to read:
293.13 (2) (b) 4. Adequate diversion and drainage of water from the exploration, bulk sampling, prospecting, or mining site.
134,11
Section
11. 293.13 (2) (b) 7. of the statutes is amended to read:
293.13 (2) (b) 7. Removal and stockpiling, or other measures to protect topsoils prior to exploration, bulk sampling, prospecting, or mining.
134,12
Section
12. 293.13 (2) (c) (intro.) of the statutes is amended to read:
293.13 (2) (c) (intro.) Minimum standards for reclamation of exploration and bulk sampling sites, where appropriate, and for prospecting and mining sites shall conform to s. 293.01 (23) and include provision for the following:
134,13
Section
13. 293.13 (2) (c) 7. of the statutes is amended to read:
293.13 (2) (c) 7. Revegetation to stabilize disturbed soils and prevent air and water pollution, with the objective of reestablishing a variety of populations of plants and animals indigenous to the area immediately prior to exploration, bulk sampling, prospecting, or mining.
134,14
Section
14. 293.15 (7m) of the statutes is created to read:
293.15 (7m) Issue licenses and approvals necessary for bulk sampling.
134,15
Section
15. 293.15 (8) of the statutes is amended to read:
293.15 (8) Promulgate rules regulating the production, storage and disposal of radioactive waste from exploration, bulk sampling, prospecting, or mining after seeking comments from the department of health services. At a minimum, rules promulgated under this subsection shall achieve the margin of safety provided in applicable federal statutes and regulations. If the department promulgates rules under this subsection, the department shall investigate the need for standards more restrictive than the applicable federal statutes and regulations.
134,16
Section
16. 293.26 of the statutes is created to read:
293.26 Bulk sampling. (1) In this section, “approval” means any permit, license, certification, contract, or other authorization that the department issues, or any other action by the department, that is required to engage in bulk sampling.
(1m) No person may engage in bulk sampling except as provided in a bulk sampling license issued by the department under sub. (4) or (14m) and any approval required by the department to engage in bulk sampling identified under sub. (4) or sub. (4m). A person who intends to engage in bulk sampling shall file a bulk sampling plan with the department. The collection of data under a bulk sampling plan may include sampling and analysis related to geophysical, geochemical, groundwater, and surface water conditions, as well as any other data or studies necessary to prepare an application for a mining permit, including the mining plan, reclamation plan, mining waste site feasibility study and plan of operation, or any other approval required for the proposed mining.
(2) A person shall include all of the following in a bulk sampling plan:
(a) A description and map of the bulk sampling site, including the number of acres in the site, the number of acres of land that will be disturbed, if any, associated with each bulk sampling location, and the locations and types of sampling or studies to be conducted at each bulk sampling location.
(b) A description of the methods to be used for the bulk sampling.
(c) A site-specific plan for controlling surface erosion that conforms to requirements under ss. 281.33 (3) and 283.33 and that identifies how impacts to plant and wildlife habitats will be avoided or minimized to the extent practicable.
(d) A revegetation plan for each area where bulk sampling will be performed that describes how adverse impacts to the environment will be avoided or minimized to the extent practicable and how the site will be revegetated and stabilized and that identifies how adverse impacts to plant and wildlife habitats will be avoided or minimized to the extent practicable.
(e) The estimated time for completing the bulk sampling and revegetation of the bulk sampling locations.
(f) A description of any known adverse environmental impacts that are likely to be caused by the bulk sampling and how those impacts will be avoided or minimized to the extent practicable.
(g) A description of any adverse effects, as defined in s. 44.31 (1), that the bulk sampling might have on any historic property, as defined in s. 44.31 (3), that is a listed property, as defined in s. 44.31 (4), that is on the Wisconsin inventory of historic places, as defined in s. 44.31 (12), or that is on the list of locally designated historic places under s. 44.45; or any scenic or recreational areas; and plans to avoid or minimize those adverse effects to the extent practicable.
(3) The department shall protect as confidential any information, other than effluent data, contained in a bulk sampling plan and in any application for an approval that is required before the bulk sampling may be implemented, upon a showing that the information is entitled to protection as a trade secret, as defined in s. 134.90 (1) (c), and any information relating to the location, quality, or quantity of a nonferrous metallic mineral deposit, to production or sales figures, or to processes or production unique to the applicant or that would tend to adversely affect the competitive position of the applicant if made public.
(4) Within 14 days of receipt of a complete bulk sampling plan under sub. (2), the department shall identify for the applicant, in writing, all approvals that are required before the bulk sampling may be implemented, any waivers, exemptions, or exceptions to those approvals that are potentially available, and any information that the department needs to issue the approvals or to issue a decision on any waiver, exemption, or exception. If no approvals are required, the department shall notify the applicant that no approvals are required and issue a bulk sampling license to the applicant.
(4m) An applicant shall file a revised bulk sampling plan if there are any significant changes to the information provided in the previous bulk sampling plan under sub. (2).
(a) If the revised bulk sampling plan is filed before the department approves or denies any waiver, exemption, or exception under sub. (12), issues any approval under sub. (13) or (14), or issues a bulk sampling license under sub. (14m), within 14 days of receiving the revised bulk sampling plan, the department shall notify the applicant, in writing, of any changes to the information provided to the applicant under sub. (4).
(b) If the revised bulk sampling plan is filed after the department approves or denies any waiver, exemption, or exception under sub. (12), issues any approval under sub. (13) or (14), or issues a bulk sampling license under sub. (14m), within 14 days of receiving the revised bulk sampling plan, the department shall identify for the applicant, in writing, any modifications to existing approvals or additional approvals that the department requires.
(5) If a storm water discharge permit under s. 283.33 (1) (a) or a water quality certification under rules promulgated under subch. II of ch. 281 to implement
33 USC 1341 (a) is required before bulk sampling may be implemented, the person filing the bulk sampling plan may apply for and be issued the permit or certification.
(6) The department shall act on any required construction site erosion control and storm water management approval, notwithstanding any authorization by the department of a local program to administer construction site erosion control and storm water management requirements.
(7) An applicant shall submit all of the following at the same time:
(a) Applications for individual approvals identified under sub. (4) or (4m) (a).
(b) Applications for coverage under general permits or registration permits identified under sub. (4) or (4m) (a).
(c) Applications for waivers, exemptions, or exceptions identified under sub. (4) or (4m) (a).
(d) A bond, as provided in sub. (9).
(8) (a) Notwithstanding any provision in ch. 23, 29, 30, 31, 169, 281, 283, 285, 289, or 291 or in a rule promulgated under those chapters that is applicable to an approval identified under sub. (4) or (4m), the application for any approval, for a waiver, exemption, or exception to an approval, or for a determination that the proposed bulk sampling activity is below the threshold that requires an approval, is considered to be complete on the 30th day after the department receives the application, unless, before that day, the department provides the applicant with written notification that the application is not complete, stating the reason for the determination and describing the specific information necessary to make the application complete.
(b) If the department provides a notice under par. (a), the applicant shall supplement the application by providing the specified information. The application is complete when the applicant provides the information.
(c) If the department determines that the issuance of an approval is contingent upon the issuance of a permit under s. 29.604 (6m), and if the application for the permit under s. 29.604 (6m) is filed with the approval application, the department may not determine that the approval application is incomplete on the basis that the department has not yet issued the permit under s. 29.604 (6m).
(9) (a) A person who intends to engage in bulk sampling shall submit with the bulk sampling plan a bond in the amount of $5,000 that is conditioned on faithful performance of the requirements of this section, that is issued by a surety company licensed to do business in this state, and that provides that the bond may not be canceled by the surety, except after not less than 90 days' notice to the department in writing by registered or certified mail.
(b) If the surety for a bond submitted under par. (a) issues a cancellation notice, the person who filed the bulk sampling plan shall deliver a replacement bond at least 30 days before the expiration of the 90-day notice period. If the person fails to submit a replacement bond, the person may not engage in bulk sampling until the person submits a replacement bond.
(c) If the license of the surety company for a bond submitted under par. (a) is revoked or suspended, the person who filed the bulk sampling plan, within 30 days after receiving written notice from the department, shall deliver a replacement bond. If the person fails to submit a replacement bond, the person may not engage in bulk sampling until the person submits a replacement bond.
(d) The department may require that the amount of the bond submitted under this subsection be increased at any time, if the department determines that it is unlikely that the bond would be adequate to fund the cost to this state of completing the revegetation plan.
(e) The department shall release a bond submitted under this subsection one year after the time for completing the bulk sampling and the revegetation set forth in the bulk sampling plan if the department determines that the person who engaged in bulk sampling has complied with this section.
