NR 252.06 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.10 NR 252.10Applicability; description of the hair pulp, chrome tan, retan-wet finishing subcategory. The provisions of this subcategory are applicable to process wastewater discharges resulting from any tannery which, either exclusively or in addition to other unhairing and tanning operation, processes raw or cured cattle or cattle-like hides into finished leather by chemically dissolving the hide hair, chrome tanning, and retan-wet finishing.
NR 252.10 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.11 NR 252.11Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): - See PDF for table PDF
NR 252.11 Note 1Within the range 6.0 to 9.0.
NR 252.11 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86; am. Table, Register, May, 2001, No. 545, eff. 6-1-01.
NR 252.12 NR 252.12Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The effluent limitations are those for BOD5, TSS, oil and grease, and pH contained in s. NR 252.11.
NR 252.12 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.13 NR 252.13Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): The effluent limitations are those for total chromium contained in s. NR 252.11.
NR 252.13 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.14 NR 252.14New source performance standards (NSPS). Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS): - See PDF for table PDF
NR 252.14 Note 1Within the range 6.0 to 9.0.
NR 252.14 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.15 NR 252.15Pretreatment standards for existing sources (PSES).
NR 252.15(1)(1) Except as provided in s. NR 252.04 and 40 CFR 403.7 and 403.13, any existing source subject to this subcategory which introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the following pretreatment standards: - See PDF for table PDF
NR 252.15 Note 1 Not less than 7.0.
NR 252.15(2) (2) Any existing source subject to this subcategory which processes less than 275 hides/day shall comply with sub. (1), except that the total chromium limitations contained in sub. (1) do not apply.
NR 252.15 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86; am. Register, May, 2001, No. 545, eff. 6-1-01.
NR 252.16 NR 252.16Pretreatment standards for new sources (PSNS). Except as provided in 40 CFR 403.7 and s. NR 252.04, any new source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the pretreatment standards contained in s. NR 252.15.
NR 252.16 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.20 NR 252.20Applicability; description of the hair save, chrome tan, retan-wet finish subcategory. The provisions of this subcategory are applicable to process wastewater discharges resulting from any tannery which processes raw or cured cattle or cattle-like hides into finished leather by hair save unhairing, chrome tanning, and retan-wet finishing.
NR 252.20 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.21 NR 252.21Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): - See PDF for table PDF
NR 252.21 Note 1Within the range 6.0 to 9.0.
NR 252.21 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.22 NR 252.22Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). The effluent limitations are those for BOD5, TSS, oil and grease, and pH contained in s. NR 252.21.
NR 252.22 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.23 NR 252.23Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): The effluent limitations are those for total chromium contained in s. NR 252.21.
NR 252.23 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.24 NR 252.24New source performance standards (NSPS). Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS): - See PDF for table PDF
NR 252.24 Note 1Within the range 6.0 to 9.0.
NR 252.24 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.25 NR 252.25Pretreatment standards for existing sources (PSES). Except as provided in s. NR 252.04 and 40 CFR 403.7 and 403.13, any existing source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the following pretreatment standards: - See PDF for table PDF
NR 252.25 Note 1Not less than 7.0.
NR 252.25 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86; am. Table, Register, May, 2001, No. 545, eff. 6-1-01.
NR 252.26 NR 252.26Pretreatment standards for new sources (PSNS). Except as provided in 40 CFR 403.7 and s. NR 252.04, any new source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the pretreatment standards contained in s. NR 252.25.
NR 252.26 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.30 NR 252.30Applicability; description of the hair save or pulp, nonchrome tan, retan-wet finish subcategory. The provisions of this subcategory are applicable to process wastewater discharges resulting from any tannery which processes raw or cured cattle or cattle-like hides into finished leather by hair save or pulp unhairing, vegetable tanning or alum, syntans, oils and other agents for tanning, and retan-wet finishing.
NR 252.30 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.31 NR 252.31Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): - See PDF for table PDF
NR 252.31 Note 1Within the range 6.0 to 9.0.
NR 252.31 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86; am. Table, Register, May, 2001, No. 545, eff. 6-1-01.
NR 252.32 NR 252.32Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). The effluent limitations are those for BOD5, TSS, oil and grease, and pH contained in s. NR 252.31.
NR 252.32 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.33 NR 252.33Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). The effluent limitations are those for total chromium contained in s. NR 252.31.
NR 252.33 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.34 NR 252.34New source performance standards (NSPS). Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS): - See PDF for table PDF
NR 252.34 Note 1Within the range 6.0 to 9.0.
NR 252.34 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.35 NR 252.35Pretreatment standards for existing sources (PSES).
NR 252.35(1)(1) Except as provided in s. NR 252.04 and 40 CFR 403.7 and 403.13, any existing source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the following pretreatment standards: - See PDF for table PDF
NR 252.35 Note 1Not less than 7.0.
NR 252.35(2) (2) Any existing source subject to this subcategory which processes less than 350 hides/day shall comply with s. NR 252.35 (1), except that the total chromium limitations contained in sub. (1) do not apply.
NR 252.35 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86; am. Register, May, 2001, No. 545, eff. 6-1-01.
NR 252.36 NR 252.36Pretreatment standards for new sources (PSNS). Except as provided in 40 CFR 403.7 and s. NR 252.04 any new source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the pretreatment standards contained in s. NR 252.35.
NR 252.36 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.40 NR 252.40Applicability; description of the retan-wet finish-sides subcategory. The provisions of this subcategory are applicable to process wastewater discharges resulting from any tannery which processes previously tanned hides and skins (grain side only) into finished leather by retan-wet finishing.
NR 252.40 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.41 NR 252.41Effluent limitations representing the degree of effluent reduction attainable by the control technology currently available (BPT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): - See PDF for table PDF
NR 252.41 Note 1Within the range 6.0 to 9.0.
NR 252.41 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86; am. Table, Register, May, 2001, No. 545, eff. 6-1-01.
NR 252.42 NR 252.42Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). The effluent limitations are those for BOD5, TSS, oil and grease, and pH contained in s. NR 252.41.
NR 252.42 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.43 NR 252.43Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). The effluent limitations are those for total chromium contained in s. NR 252.41.
NR 252.43 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.44 NR 252.44New source performance standards (NSPS). Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS): - See PDF for table PDF
NR 252.44 Note 1Within the range 6.0 to 9.0.
NR 252.44 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86; am. Table, Register, May, 2001, No. 545, eff. 6-1-01.
NR 252.45 NR 252.45Pretreatment standards for existing sources (PSES). Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the following pretreatment standards: - See PDF for table PDF
NR 252.45 Note 1Within the range 6.0 to 10.0.
NR 252.45 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.46 NR 252.46Pretreatment standards for new sources (PSNS). Except as provided in 40 CFR 403.7, any new source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the pretreatment standards contained in s. NR 252.45.
NR 252.46 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.50 NR 252.50Applicability; description of the no beamhouse subcategory. The provisions of this subcategory are applicable to process wastewater discharges resulting from any tannery which processes cattle hides, sheepskins, or splits (hair previously removed and pickled) into finished leather by chrome or nonchrome tanning, and retan-wet finishing.
NR 252.50 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.51 NR 252.51Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): - See PDF for table PDF
NR 252.51 Note 1Within the range 6.0 to 9.0.
NR 252.51 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86; am. Table, Register, May, 2001, No. 545, eff. 6-1-01.
NR 252.52 NR 252.52Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional control technology (BCT). The effluent limitations are those for BOD5, TSS, oil and grease, and pH contained in s. NR 252.51.
NR 252.52 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.53 NR 252.53Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, any existing point source subject to this subcategory shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT). The effluent limitations are those for total chromium contained in s. NR 252.51.
NR 252.53 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.54 NR 252.54New source performance standards (NSPS). Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS): - See PDF for table PDF
NR 252.54 Note 1Within the range 6.0 to 9.0.
NR 252.54 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.55 NR 252.55Pretreatment standards for existing sources (PSES). Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the following pretreatment standards: - See PDF for table PDF
NR 252.55 Note 1Within the range 6.0 to 10.0.
NR 252.55 History History: Cr. Register, October, 1986, No. 370, eff. 11-1-86.
NR 252.56 NR 252.56Pretreatment standards for new sources (PSNS). Except as provided in 40 CFR 403.7, any new source subject to this subcategory that introduces process wastewater pollutants into a publicly owned treatment works shall comply with 40 CFR Part 403, and achieve the pretreatment standards contained in s. NR 252.55.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.