134.24(2)(a)1. 1. A certified copy of each document that is used at the time of filing by the performing rights society to enter into a contract with a proprietor doing business in this state.
134.24(2)(a)2. 2. A list, that is the most current list available at the time of the filing, of the copyright owners who are represented by the performing rights society and of the musical works licensed by the performing rights society.
134.24(2)(b) (b) Make available, upon request of a proprietor, information as to whether a specific musical work is licensed under a contract entered into by the performing rights society and a copyright owner. A proprietor may request this information by telephone or other electronic means.
134.24(2)(c) (c) Make available, upon written request of a proprietor and at the sole expense of a proprietor, any of the information required to be on file under par. (a).
134.24(3) (3)Disclosure requirements.
134.24(3)(a)(a) No performing rights society may offer to enter into, or offer to enter into, a contract for the payment of royalties by a proprietor unless the performing rights society, at the time of the offer or between the time of the offer and 72 hours before the execution of the contract, provides to the proprietor a written notice of all of the obligations of the performing rights society as specified under sub. (2). The written notice shall also contain a statement as to whether the performing rights society is in compliance with any applicable federal law or court order that relates to the rates and terms of royalties to be paid by the proprietor or that relates to the circumstances or methods under which contracts subject to this section are offered to the proprietor.
134.24(3)(b) (b) No performing rights society may make an incomplete or false disclosure in the written notice required under par. (a).
134.24(4) (4)Contract requirements.
134.24(4)(a)(a) A contract entered into or renewed in this state by a proprietor and a performing rights society for the payment of royalties shall be in writing and signed by the parties.
134.24(4)(b) (b) The information in the contract shall include all of the following:
134.24(4)(b)1. 1. The proprietor's name and business address and the name and location of each retail establishment and restaurant to which the contract applies.
134.24(4)(b)2. 2. The name of the performing rights society.
134.24(4)(b)3. 3. The length of the contract.
134.24(4)(b)4. 4. The schedule of rates and terms of the royalties to be collected under the contract, including any sliding scale or schedule for any increase or decrease of the rates during the term of the contract.
134.24(5) (5)Prohibited practices. No employe or agent of a performing rights society may do any of the following:
134.24(5)(a) (a) Enter the business premises of a proprietor to discuss a contract under this section with the proprietor or his or her employes, without identifying himself or herself and making known the purpose of the visit before commencing any further communication with the proprietor or the proprietor's employes.
134.24(5)(b) (b) Engage in any coercive conduct, act or practice that disrupts the business premises of a proprietor in a substantial manner.
134.24(5)(c) (c) Use or attempt to use any deceptive act or practice in negotiating a contract with a proprietor or in collecting royalties from a proprietor.
134.24(5)(d) (d) Fail to comply with the requirements imposed under subs. (2), (3) and (4).
134.24(6) (6)Civil remedy. Any person damaged as a result of a violation of this section may bring a civil action to recover damages, court costs and, notwithstanding s. 814.04 (1), reasonable attorney fees. The person may also request in the action any other legal or equitable relief.
134.24(7) (7)Other rights and remedies. This section does not limit any other right or remedy provided by law.
134.24 History History: 1995 a. 284.
134.25 134.25 Misbranding of gold articles.
134.25(1) (1) Any person, firm, corporation or association, who or which makes for sale, or sells, or offers to sell or dispose of, or has in his, her or its possession with intent to sell or dispose of, any article of merchandise made in whole or in part of gold or any alloy of gold, and having stamped, branded, engraved or imprinted thereon, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which said article is encased or enclosed any mark, indicating or designed or intended to indicate, that the gold or alloy of gold in such article is of a greater degree of fineness than the actual fineness or quality of such gold or alloy, unless the actual fineness of such gold or alloy, in the case of flat ware and watch cases, be not less by more than three one-thousandths parts, and in the case of all other articles be not less by more than one-half karat than the fineness indicated by the marks stamped, branded, engraved or imprinted upon any part of such article, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which such article is encased or enclosed, according to the standards and subject to the qualifications hereinafter set forth, is guilty of misdemeanor.
134.25(2) (2) In any test for the ascertainment of the fineness of the gold or its alloy in any such article, according to the foregoing standards, the part of the gold or of its alloy taken for the test, analysis or assay shall be such part or portion as does not contain or have attached thereto any solder or alloy of inferior fineness used for brazing or uniting the parts of said article.
134.25(3) (3) In addition to the foregoing tests and standards, that the actual fineness of the entire quantity of gold and of its alloys contained in any article mentioned in this section (except watch cases and flat ware), including all solder or alloy of inferior metal used for brazing or uniting the parts of the article (all such gold, alloys and solder being assayed as one piece) shall not be less by more than one karat, than the fineness indicated by the mark stamped, branded, engraved or imprinted upon such article, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which said article is encased or enclosed.
134.26 134.26 Misbranding of sterling silver articles.
134.26(1) (1) Any person, firm, corporation or association, who or which makes for sale, or sells, or offers to sell or dispose of, or has in his, her or its possession with intent to sell or dispose of, any article of merchandise made in whole or in part of silver or of any alloy of silver and having marked, stamped, branded, engraved or imprinted thereon, or upon any tag, card or label attached thereto or upon any box, package, cover or wrapper in which said article is encased or enclosed, the words "sterling silver" or "sterling," or any colorable imitation thereof, unless nine hundred twenty-five one-thousandths of the component parts of the metal appearing or purporting to be silver, of which such article is manufactured are pure silver, subject to the qualifications hereinafter set forth, is guilty of a misdemeanor.
134.26(2) (2) In the case of all such articles there shall be allowed a divergence in fineness of four one-thousandths parts from the foregoing standards.
134.27 134.27 Misbranding of coin silver articles.
134.27(1) (1) Any person, firm, corporation or association, who or which makes for sale, or sells, or offers to sell or dispose of, or has in his, her or its possession with intent to sell or dispose of, any article of merchandise made in whole or in part of silver or of any alloy of silver and having marked, stamped, branded, engraved or imprinted thereon, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which such article is encased or enclosed, the words "coin" or "coin silver," or any colorable imitation thereof, unless nine hundred one-thousandths of the component parts of the metal appearing or purporting to be silver, of which such article is manufactured are pure silver, subject to the qualifications hereinafter set forth, is guilty of a misdemeanor.
134.27(2) (2) In the case of all such articles there shall be allowed a divergence in fineness of four one-thousandths parts from the foregoing standards.
134.28 134.28 Misbranding of base silver articles. Any person, firm, corporation or association, who or which makes for sale, or sells, or offers to sell or dispose of, or has in his, her or its possession with intent to sell or dispose of, any article of merchandise made in whole or in part of silver or of any alloy of silver, and having stamped, branded, engraved or imprinted thereon, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which said article is encased or enclosed, any mark or word (other than the word "sterling" or the word "coin") indicating, or designed or intended to indicate, that the silver or alloy of silver in said article, is of a greater degree of fineness than the actual fineness or quality of such silver or alloy, unless the actual fineness of the silver or alloy of silver of which said article is composed be not less by more than four one-thousandths parts than the actual fineness indicated by the said mark or word (other than the word "sterling" or "coin") stamped, branded, engraved or imprinted upon any part of said article, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which said article is encased or enclosed, subject to the qualifications hereinafter set forth, is guilty of a misdemeanor.
134.29 134.29 Testing of silver articles.
134.29(1) (1) In any test for the ascertainment of the fineness of any such article mentioned in ss. 134.26 to 134.28, according to the standards therein, the part of the article taken for the test, analysis or assay, shall be such part or portion as does not contain or have attached thereto any solder or alloy of inferior metal used for brazing or uniting the parts of such article.
134.29(2) (2) In addition to the foregoing test and standards, the actual fineness of the entire quantity of metal purporting to be silver contained in any article mentioned in ss. 134.26 to 134.28, including all solder or alloy of inferior fineness used for brazing or uniting the parts of any such article (all such silver, alloy or solder being assayed as one piece) shall not be less by more than ten one-thousandths parts than the fineness indicated according to the foregoing standards, by the mark stamped, branded, engraved or imprinted upon such article, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which said article is encased or enclosed.
134.30 134.30 Misbranding of gold plated articles. Any person, firm, corporation or association, who or which makes for sale, or sells or offers to sell or dispose of, or has in his, her or its possession with intent to sell or dispose of, any article of merchandise made in whole or in part of inferior metal having deposited or plated thereon or brazed or otherwise affixed thereto a plate, plating, covering or sheet of gold or of any alloy of gold, and which article is known in the market as "rolled gold plate," "gold plate," "gold filled" or "gold electroplate," or by any similar designation, and having stamped, branded, engraved or imprinted thereon, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which said article is encased or enclosed, any word or mark usually employed to indicate the fineness of gold, unless said word be accompanied by other words plainly indicating that such article or some part thereof is made of rolled gold plate, or gold plate, or gold electroplate, or is gold filled, as the case may be, is guilty of a misdemeanor.
134.31 134.31 Misbranding of silver plated articles. Any person, firm, corporation or association, who or which makes for sale, or sells or offers to sell or dispose of, or has in his, her or its possession with intent to sell or dispose of, any article of merchandise made in whole or in part of inferior metal, having deposited or plated thereon or brazed or otherwise affixed thereto, a plate, plating, covering or sheet of silver or of any alloy of silver, and which article is known in the market as "silver plate" or "silver electroplate," or by any similar designation, and having stamped, branded, engraved or imprinted thereon, or upon any tag, card or label attached thereto, or upon any box, package, cover or wrapper in which said article is encased or enclosed, the word "sterling" or the word "coin," either alone or in conjunction with any other words or marks is guilty of a misdemeanor.
134.32 134.32 Penalty for violations of sections 134.25 to 134.32. Every person, firm, corporation or association guilty of a violation of any one of the provisions of ss. 134.25 to 134.32, and every officer, manager, director or managing agent of any such person, firm, corporation or association, directly participating in such violation or consenting thereto, shall be punished by a fine of not more than $500 nor less than $25, or imprisonment for not more than 3 months, or both, at the discretion of the court.
134.33 134.33 Platinum stamping.
134.33(1)(1)Definitions. In this section unless the context otherwise requires:
134.33(1)(a) (a) "Apply" and "applied" include any method or means of application or attachment to, or of use on, or in connection with, or in relation to, an article, whether such application, attachment or use is to, on, by, in or with the article itself, or anything attached to the article, or anything to which the article is attached, or anything in or on which the article is, or anything so used or placed as to lead to a reasonable belief that the mark on that thing is meant to be taken as a mark on the article itself.
134.33(1)(b) (b) "Article" means any article of merchandise and includes any portion of such article, whether a distinct part thereof, or not, including every part thereof whether or not separable and also including material for manufacture.
134.33(1)(c) (c) "Mark" means any mark, sign, device, imprint, stamp, brand applied to any article, or to any tag, card, paper, label, box, carton, container, holder, package cover or wrapping attached to, used in conjunction with or enclosing such article or any bill, bill of sale, invoice, statement, letter, circular, advertisement, notice, memorandum or other writing or printing.
134.33(1)(d) (d) "Platinum," "iridium," "palladium," "ruthenium," "rhodium" or "osmium," include any alloy or alloys of any one or more of said metals.
134.33(1)(e) (e) "Quality mark" is any mark as herein defined indicating, describing, identifying or referring to or appearing or seeming or purporting to indicate, describe, identify or refer to the partial or total presence or existence of or the quality of or the percentage of or the purity of or the number of parts of platinum, iridium, palladium, ruthenium, rhodium or osmium in any article.
134.33(2) (2)Application of quality mark.
134.33(2)(a)(a) When an article is composed of mechanism, works or movements and of a case or cover containing the mechanism, works or movements, a quality mark applied to the article shall be deemed not to be, nor to be intended to be, applied to the mechanism, works, or movements.
134.33(2)(b) (b) The quality mark applied to the article shall be deemed not to apply to springs, winding bars, sleeves, crown cores, mechanical joint pins, screws, rivets, dust-bands, detachable movement rims, hatpin stems, bracelet and necklace snap tongues. In addition, in the event that an article is marked under sub. (1) (e), the quality mark applied to the article shall be deemed not to apply to pin tongues, joints, catches, lapel button backs and the posts to which they are attached, scarf pin stems, hat pin sockets, shirtstud backs, vest button backs and ear screw backs, provided such parts are made of the same quality of gold as is used in the balance of this article.
134.33(3) (3)Trademark. If there is any quality mark printed, stamped or branded on the article itself, there must also be printed, stamped or branded on the said article itself the following mark, to wit: A trademark duly applied for or registered under the laws of the United States of the manufacturer of such article; except that if such manufacturer has sold or contracted to sell such article to a jobber, wholesaler or retail dealer regularly engaged in the business of buying and selling similar articles, this provision shall be deemed to be complied with if there is so marked on the said article the trademark duly registered under the laws of the United States of such jobber, wholesaler or retail dealer respectively; and in such event there may also be marked on the said article itself numerals intended to identify the articles, design or pattern provided, however, that such numerals do not appear or purport to be a part of the quality mark and provided that they are not calculated to mislead or deceive anyone into believing that they are part of the quality mark.
134.33(4) (4)Quality marks; description.
134.33(4)(a)(a) All quality marks applied to any article shall be equal in size and equally visible, legible, clear and distinct and no quality mark which is false, deceptive or misleading shall be applied to any article or to any descriptive device therefor. No more than one quality mark shall be applied to any article and such quality mark shall be applied to such article in only one place thereon except as elsewhere in this section specifically permitted.
134.33(4)(b) (b) Wherever in this article provision is made for marking the number of parts or percentage of metals such number or percentage shall refer to weight and not to volume, thickness or any other basis.
134.33(5) (5)Quality; contents. There shall not be applied to any article any quality mark nor any colorable imitation thereof, nor any contraction thereof, nor any addition thereto, nor any words or letters, nor any mark purporting to be or resembling a quality mark except as follows:
134.33(5)(a) (a) An article consisting of at least nine hundred eighty-five thousandths parts of platinum, iridium, palladium, ruthenium, rhodium or osmium, where solder is not used and at least nine hundred fifty thousandths parts of said metal or metals where solder is used, may be marked "platinum" provided that the total of the aforementioned metals other than pure platinum shall amount to no more than fifty thousandths parts of the contents of the entire article.
134.33(5)(b) (b) An article consisting of at least nine hundred eighty-five thousandths parts of platinum, iridium, palladium, rhodium, ruthenium or osmium where solder is not used and at least nine hundred fifty thousandths parts of the said metal or metals where solder is used, and provided further that at least seven hundred fifty thousandths parts of said article are pure platinum, may be marked "platinum," provided immediately preceding the mark "platinum" there is marked the name or abbreviation as hereinafter provided, of either iridium, palladium, ruthenium, rhodium or osmium, whichever of said metals predominates and provided further that such predominating other metal must be more than fifty thousandths part of the entire article.
134.33(5)(c) (c) An article consisting of at least nine hundred eighty-five thousandths parts of platinum, iridium, palladium, ruthenium, rhodium or osmium, where solder is not used and at least nine hundred fifty thousandths parts of said metals where solder is used, provided more than five hundred thousandths parts of said article consist of pure platinum, may be marked with the word "platinum," provided that said word is immediately preceded by a decimal fraction in one-thousandths showing the platinum content in proportion to the content of the entire article, and further provided that said mark "platinum" be followed by the name or abbreviation as herein allowed, of such one or more of the following metals, to wit: iridium, palladium, ruthenium, rhodium or osmium, that may be present in the article in quantity of more than fifty-thousandths parts of the entire article. The name of such other metal or metals other than platinum, however, shall each be immediately preceded by a decimal fraction in one-thousandths showing the content of such other metal or metals in proportion to the entire article, as for example, 600 plat., 350 pall., or 500 plat., 200 pall., 150 ruth., 100 rhod.
134.33(5)(d) (d) An article consisting of nine hundred fifty thousandths parts of the following metals: platinum, iridium, palladium, ruthenium, rhodium or osmium with less than five hundred thousandths parts of the entire article consisting of pure platinum, may be marked with the name iridium, palladium, ruthenium, rhodium or osmium, whichever predominates in the said article, but in no event with the mark "platinum," provided, however, that the quantity of such metal other than platinum so marked, must be marked in decimal thousandths, and provided further that the name of such metal other than platinum so used must be spelled out in full irrespective of any other provisions of this article to the contrary.
134.33(5)(e) (e) An article composed of platinum and gold which resembles, appears or purports to be platinum, may be marked with a karat mark and the platinum mark, provided:
134.33(5)(e)1. 1. The platinum in such article shall be at least nine hundred eighty-five thousandths parts pure platinum; and
134.33(5)(e)2. 2. The fineness of the gold in such article shall be correctly described by the karat mark of said gold; and
134.33(5)(e)3. 3. The percentage of platinum in such article shall be no less than five per cent in weight of the total weight of the article; and
134.33(5)(e)4. 4. The mark shall be so applied that the karat mark shall immediately precede the platinum mark, as for example, "14 K & Plat.", "18 K & Plat.", as the case may be, it being expressly provided that in case the percentage of platinum exceeds the 5% provided herein, the quality mark may also include a declaration of the percentage of platinum, as for example, "18 K & 1/10th Plat.", or "14 K & 1/8th Plat.", or as the case may be.
134.33(5)(f) (f) An article composed of platinum and any other material or metal not resembling, appearing or purporting to be platinum, may be marked with the quality mark platinum provided all parts or portions of such article resembling or appearing or purporting to be platinum, or reasonably purporting to be described as platinum by said quality mark, shall be at least nine hundred eighty-five thousandths parts pure platinum.
134.33(6) (6)Abbreviations.
134.33(6)(a)(a) Whenever provided for in this article, except as specifically excepted, the word "platinum" may be applied by spelling it out in full or by the abbreviation "plat.", the word "iridium" may be applied by spelling it out in full or by the abbreviation "irid.", the word "palladium" may be applied by spelling it out in full or by the abbreviation "pall.", the word "ruthenium" may be applied by spelling it out in full or by the abbreviation "ruth.", the word "rhodium" may be applied by spelling it out in full or by the abbreviation "rhod.", and the word "osmium" may be applied by spelling it out in full or by the abbreviation "osmi.".
134.33(7) (7)Prima facie proof.
134.33(7)(a)(a) In any action relating to the enforcement of any provision of this section, a certificate duly issued by an assay office of the treasury department of the United States, certifying the weight of any article, or any part thereof, or of the kind, weight, quality, fineness or quantity of any ingredient thereof, shall be receivable in evidence as constituting prima facie proof of the matter or matters so certified.
134.33(7)(b) (b) In any action relating to the enforcement of this section, proof that an article has been marked in violation of this section shall be deemed to be prima facie proof that such article was manufactured after July 1, 1937.
134.33(8) (8)Penalties. Any person, firm, partnership, corporation or association or any officer, director, employe or agent thereof who makes, or sells, or offers to sell, or disposes of, or has in his or her or its possession, with intent to sell or dispose of, any article as herein defined to which is applied any quality mark which does not conform to all the provisions of this section, or from which is omitted any mark required by this section, shall be guilty of a misdemeanor and upon conviction thereof shall be punished by a fine of not more than $1,000 or by imprisonment for not more than 6 months, or by both such fine and imprisonment in the discretion of the court, provided, however, that it shall be a defense to any prosecution under this section for the defendant to prove that the said article was manufactured and marked with the intention of and for purposes of exportation from the United States, and that the said article was either actually exported from the United States to a foreign country within 6 months after date of manufacture thereof with the bona fide intention of being sold in the said country and of not being reimported, or that it was delivered within 6 months after date of manufacture thereof, to a person, firm or corporation whose exclusive customary business is the exportation of such articles from the United States.
134.33(10) (10)Effective date. This section shall take effect July 1, 1937, and shall not apply to any article manufactured prior thereto.
134.33 History History: 1979 c. 89; 1981 c. 390 s. 252; 1983 a. 189; 1993 a. 482.
134.34 134.34 Duplication of vessel hulls and parts.
134.34(1) (1) In this section:
134.34(1)(a) (a) "Direct molding process" means any direct molding process in which the original manufactured vessel hull or component part of a vessel is itself used as a plug for the making of the mold, which is then used to manufacture a duplicate item.
134.34(1)(b) (b) "Mold" means a matrix or form in which a substance or material is shaped.
134.34(1)(c) (c) "Plug" means a device or model used to make a mold for the purpose of exact duplication.
134.34(2) (2) No person may use the direct molding process to duplicate for the purpose of sale a manufactured vessel hull or component part of a vessel made by another person without the written permission of that other person.
134.34(3) (3) No person may knowingly sell a vessel hull or component part of a vessel duplicated in violation of sub. (2).
134.34(4) (4) This section applies only to vessel hulls or component parts of vessels duplicated using a mold made after June 30, 1983.
134.34(5) (5) A person who suffers injury or damage as the result of a violation of this section may bring an action in circuit court for an injunction prohibiting the violation. In addition, the person shall be entitled to actual damages incurred as a result of the violation, reasonable attorney fees and costs, notwithstanding s. 814.04 (1).
134.34 History History: 1983 a. 324.
134.345 134.345 Form retention and disposal.
134.345(1) (1) In this section:
134.345(1)(a) (a) "Customer" means any person who causes a molder to make a form or to use a form to make a product.
134.345(1)(b) (b) "Form" means an object in or around which material is placed to make a mold for pouring plastic or casting metal, and includes a mold, die or pattern.
134.345(1)(c) (c) "Molder" means any person who makes a form or who uses a form to make a product.
134.345(2) (2) Unless a customer and a molder otherwise agree in writing a molder may, as provided in sub. (3), dispose of a form possessed by a customer if the customer does not take from the molder physical custody of the form within 3 years after the molder's last prior use of the form.
134.345(3) (3) A molder who wishes to dispose of a form shall send written notice by registered mail with return receipt requested to the customer's last-known address and to any address set forth in the agreement under which the molder obtained physical custody of the form. The notice shall state that the molder intends to dispose of the form. The molder may dispose of the form without liability to the customer if, within 120 days after the molder receives the return receipt of the notice or within 120 days after the molder sends notice if no return receipt is received within that period, the customer does not take physical custody of the form or enter into an agreement with the molder for taking possession or physical custody of the form.
Loading...
Loading...
This is an archival version of the Wis. Stats. database for 1995. See Are the Statutes on this Website Official?