Installation Parameters by Slide Typea - See PDF for table PDF
N/A = not applicable; > = greater than or equal to; < = less than or equal to.
a   Slide installation as per manufacturer's requirements if more stringent. For slide types not specifically listed in this table, contact the department.
b   Interpolation would be used for increasing drop and increasing depth proportionally.
c   Water slides with a drop shall comply with drop slide requirements in this table.
d   No minimum separation distance where slide exit prevents exiting over adjacent slide path
e   Minimum distance may be reduced if slide terminus is designed and installed to restrict patron exit angle.
SPS 390.31(4) (4)Slide flume water.
SPS 390.31(4)(a)(a) Except for waterslides, water for flume lubrication shall be a maximum of 10 percent of the circulation flow.
SPS 390.31(4)(b) (b) The balance tank for runout slide flume lubrication systems shall be at a minimum of 2 times the combined flow rate of the water attraction pump and of a sufficient volume to allow operation through all cycles of filtration operation.
SPS 390.31 History History: CR 08-056: cr. Register February 2009 No. 638, eff. 3-1-09; correction in (2) (f), (i), (3) (a) made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672.
subch. V of ch. SPS 390 Subchapter V — Incorporation of Standards
SPS 390.40 SPS 390.40Incorporation of standards by reference.
SPS 390.40(1)(1)Consent. Pursuant to s. 227.21 (2), Stats., the attorney general has consented to the incorporation by reference of the standards listed in sub. (3).
SPS 390.40 Note Note: Copies of the adopted standards are on file in the offices of the department and the Legislative Reference Bureau. Copies of the standards may be purchased through the respective organizations listed in Tables 390.40-1 to 390.40-2.
SPS 390.40(2) (2)Alternate standards.
SPS 390.40(2)(a)1.1. Alternate standards that are equivalent to or more stringent than the standards referenced in this code may be used in lieu of the referenced standards when approved by the department or if written approval is issued by the department in accordance with par. (b).
SPS 390.40(2)(a)2. 2. Upon receipt of a fee as specified in ch. SPS 302 and a written request, the department may issue an approval for the use of the alternate standard.
SPS 390.40(2)(a)3. 3. The department shall review and make a determination on an application for approval within 40 business days of receipt of all forms, fees and documents required to complete the review.
SPS 390.40(2)(b) (b) Determination of approval shall be based on an analysis of the alternate standard and the standard referenced in this code, prepared by a qualified party.
SPS 390.40(2)(c) (c) The department may include specific conditions in issuing an approval, including an expiration date for the approval. Violations of the conditions under which an approval is issued shall constitute a violation of this code.
SPS 390.40(2)(d) (d) If the department determines that the alternate standard is not equivalent to or more stringent than the referenced standard, the request for approval shall be denied in writing.
SPS 390.40(2)(e) (e) The department may revoke an approval for any false statements or misrepresentations of facts on which the approval was based.
SPS 390.40(2)(f) (f) The department may reexamine an approved alternate standard and issue a revised approval at any time.
SPS 390.40(3) (3)Adoption of standards. The standards referenced in Tables 390.40-1 to 390.40-2 are hereby incorporated by reference into this chapter.
SPS 390.40 Note Note: The tables in this section provide a comprehensive listing of all of the standards adopted by reference in this code. For requirements or limitations in how these standards are to be applied, refer to the code section that requires compliance with the standard.
Table 390.40-1 - See PDF for table PDF
Table 390.40-2 - See PDF for table PDF
SPS 390.40 History History: CR 08-056: cr. Register February 2009 No. 638, eff. 3-1-09; correction in (2) (a) 2., (3) made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.