NR 460.08(8)(b)1.g.
g. A statement by the owner or operator of the affected existing, new or reconstructed source as to whether the source has complied with the relevant standard or other requirements.
NR 460.08(8)(b)2.
2. The notification shall be sent before the close of business on the 60th day following the completion of the relevant compliance demonstration activity specified in the relevant standard, unless a different reporting period is specified in the standard, in which case the letter shall be sent before the close of business on the day the report of the relevant testing or monitoring results is required to be delivered or postmarked. For example, the notification shall be sent before close of business on the 60th, or other required, day following completion of the initial performance test and again before the close of business on the 60th, or other required, day following the completion of any subsequent required performance test. If no performance test is required but opacity or visible emission observations are required to demonstrate compliance with an opacity or visible emission standard under
40 CFR part 63 or
chs. NR 460 to
469, the notification of compliance status shall be sent before close of business on the 30th day following the completion of opacity or visible emission observations. Notifications may be combined as long as the due date requirement for each notification is met.
NR 460.08(8)(c)
(c) After a part 70 permit has been issued to the owner or operator of an affected source, the owner or operator of the source shall comply with all requirements for compliance status reports contained in the source's part 70 permit, including reports required under
40 CFR part 63 or
chs. NR 460 to
469. After a part 70 permit has been issued to the owner or operator of an affected source, and each time a notification of compliance status is required under
40 CFR part 63 or
chs. NR 460 to
469, the owner or operator of the source shall submit the notification of compliance status to the department following completion of the relevant compliance demonstration activity specified in the relevant standard.
NR 460.08(8)(d)
(d) If an owner or operator of an affected source submits estimates or preliminary information in the application for approval of construction or reconstruction required in
ch. NR 406 in place of the actual emissions data or control efficiencies, the owner or operator shall submit the actual emissions data and other correct information as soon as available but no later than with the initial notification of compliance status required in this section.
NR 460.08(8)(e)
(e) Advice on a notification of compliance status may be obtained from the department.
NR 460.08(9)
(9) Adjustment to time periods or postmark deadlines for submittal and review of required communications. NR 460.08(9)(a)(a) An owner or operator shall request the adjustment provided for in
pars. (b) and
(c) each time he or she wishes to change an applicable time period or postmark deadline specified in
chs. NR 460 to
469 or in
40 CFR part 63.
NR 460.08(9)(b)
(b) Notwithstanding time periods or postmark deadlines specified in
chs. NR 460 to
469 or
40 CFR part 63 for the submittal of information to the department by an owner or operator, or the review of the information by the department, time periods or deadlines may be changed by mutual agreement between the owner or operator and the department. An owner or operator who wishes to request a change in a time period or postmark deadline for a particular requirement shall request the adjustment in writing as soon as practicable before the subject activity is required to take place. The owner or operator shall include in the request whatever information he or she considers useful to convince the department that an adjustment is warranted.
NR 460.08(9)(c)
(c) If, in the department's judgment, an owner or operator's request for an adjustment to a particular time period or postmark deadline is warranted, the department shall approve the adjustment. The department shall notify the owner or operator in writing of approval or disapproval of the request for an adjustment within 15 calendar days of receiving sufficient information to evaluate the request.
NR 460.08(9)(d)
(d) If the department is unable to meet a specified deadline, it shall notify the owner or operator of any significant delay and inform the owner or operator of the amended schedule.
NR 460.08(10)
(10) Change in information already provided. Any change in the information already provided under this section shall be provided to the department in writing within 15 calendar days after the change.
NR 460.08 History
History: Cr.
Register, March, 1997, No. 495, eff. 4-1-97;
CR 00-175: r. (2) (d) 4.
Register March 2002 No. 555, eff. 4-1-02;
CR 05-039: am. (2) (b) 4., (d) (intro.), 1., (e), (8) (b) 1. e. and 2., r. (2) (c), (d) 2. and 3.,
Register February 2006 No. 602, eff. 3-1-06.
NR 460.09
NR 460.09 Recordkeeping and reporting requirements. NR 460.09(1)(a)(a) The requirements of this section apply to owners or operators of affected sources who are subject to the provisions of
40 CFR part 63 or
chs. NR 460 to
469, unless specified otherwise in a relevant standard.
NR 460.09(1)(b)
(b) For affected sources that have been granted an extension of compliance under Subpart D of
40 CFR part 63, the requirements of this section do not apply to those sources while they are operating under compliance extensions.
NR 460.09(1)(c)
(c) The owner or operator of an affected source subject to recordkeeping and reporting requirements established under
40 CFR part 63 or
chs. NR 460 to
469 shall submit the required reports to the department.
NR 460.09(1)(d)
(d) If an owner or operator supervises one or more stationary sources in Wisconsin affected by more than one standard established pursuant to section 112 of the act (
42 USC 7412), the owner or operator and the department may arrange by mutual agreement a common schedule on which periodic reports required for each source shall be submitted throughout the year. The allowance in the previous sentence applies beginning one year after the latest compliance date for any relevant standard established pursuant to section 112 of the act (
42 USC 7412). Procedures governing the implementation of this provision are specified in
s. NR 460.08 (9).
NR 460.09(1)(e)
(e) If an owner or operator supervises one or more stationary sources affected by standards established pursuant to section 112 of the act (
42 USC 7412), as amended November 15, 1990, and standards set under
40 CFR part 60,
40 CFR part 61, or both parts, the owner or operator and the department may arrange by mutual agreement a common schedule on which periodic reports required by each relevant standard shall be submitted throughout the year. The allowance in the previous sentence applies beginning one year after the stationary source is required to be in compliance with the relevant section 112 standard, or one year after the stationary source is required to be in compliance with the applicable
40 CFR part 60 or
40 CFR part 61 standard, whichever is latest. Procedures governing the implementation of this provision are specified in
s. NR 460.08 (9).
NR 460.09(2)(a)(a) General. The owner or operator of an affected source subject to the provisions of
40 CFR part 63 or
chs. NR 460 to
469 shall maintain files of all information, including all reports and notifications, required by
40 CFR part 63 or
chs. NR 460 to
469 recorded in a form suitable and readily available for expeditious inspection and review. The files shall be retained for at least 5 years following the date of each occurrence, measurement, maintenance, corrective action, report or record. At a minimum, the most recent 2 years of data shall be retained on site. The remaining 3 years of data may be retained off site. Files may be maintained on microfilm, on a computer, on computer floppy disks, on magnetic tape disks or on microfiche.
NR 460.09(2)(b)
(b) Recordkeeping requirements. The owner or operator of an affected source subject to the provisions of
40 CFR part 63 shall maintain relevant records for the source of all of the following:
NR 460.09(2)(b)1.
1. The occurrence and duration of each startup or shutdown when the startup or shutdown causes the source to exceed any applicable emission limitation in the relevant emission standards.
NR 460.09(2)(b)2.
2. The occurrence and duration of each malfunction of operation, that is process equipment, or the required air pollution control and monitoring equipment.
NR 460.09(2)(b)3.
3. All required maintenance performed on the air pollution control and monitoring equipment.
NR 460.09(2)(b)4.a.a. Actions taken during periods of startup or shutdown when the source exceeded applicable emission limitations in a relevant standard and when the actions taken are different from the procedures specified in the affected source's startup, shutdown and malfunction plan, required in
s. NR 460.05 (4) (c).
NR 460.09(2)(b)4.b.
b. Actions taken during periods of malfunction, including corrective actions to restore malfunctioning process and air pollution control and monitoring equipment to its normal or usual manner of operation, when the actions taken are different from the procedures specified in the affected source's startup, shutdown and malfunction plan required in
s. NR 460.05 (4) (c).
NR 460.09(2)(b)5.
5. All information necessary, including actions taken, to demonstrate conformance with the affected source's startup, shutdown and malfunction plan, required in
s. NR 460.05 (4) (c), when all actions taken during periods of startup or shutdown, and the startup or shutdown causes the source to exceed any applicable emission limit in the relevant emission standards, and all actions taken during periods of malfunction, including corrective actions to restore malfunctioning process and air pollution control and monitoring equipment to its normal or usual manner of operation, are consistent with the procedures specified in the plan. The information needed to demonstrate conformance with the startup, shutdown and malfunction plan may be recorded using a checklist or some other effective form of recordkeeping, in order to minimize the recordkeeping burden for conforming events.
NR 460.09(2)(b)6.
6. Each period during which a continuous monitoring system is malfunctioning or inoperative, including out-of-control periods.
NR 460.09(2)(b)7.
7. All required measurements needed to demonstrate compliance with a relevant standard, including, but not limited to, 15-minute averages of continuous monitoring system data, raw performance testing measurements and raw performance evaluation measurements, that support data that the source is required to report. The following limitations apply:
NR 460.09(2)(b)7.a.
a. This subdivision paragraph applies to owners or operators required to install a continuous emissions monitoring system (CEMS) where the CEMS installed is automated, and where the calculated data averages do not exclude periods of CEMS breakdown or malfunction. An automated CEMS records and reduces the measured data to the form of the pollutant emission standard through the use of a computerized data acquisition system. In lieu of maintaining a file of all CEMS subhourly measurements under this subdivision, the owner or operator shall retain the most recent consecutive 3 averaging periods of subhourly measurements and a file that contains a hard copy of the data acquisition system algorithm used to reduce the measured data into the reportable form of the standard.
NR 460.09(2)(b)7.b.
b. This subdivision paragraph applies to owners or operators required to install a CEMS where the measured data is manually reduced to obtain the reportable form of the standard, and where the calculated data averages do not exclude periods of CEMS breakdown or malfunction. In lieu of maintaining a file of all CEMS subhourly measurements under this subdivision, the owner or operator shall retain all subhourly measurements for the most recent reporting period. The subhourly measurements shall be retained for 120 days from the date of the most recent summary or excess emission report submitted to the department.
NR 460.09(2)(b)7.c.
c. The department, upon notification to the source, may require the owner or operator to maintain all measurements as required by
subd. 7. (intro.) if the department determines these records are required to more accurately assess the compliance status of the affected source.
NR 460.09(2)(b)8.
8. All results of performance tests, continuous monitoring system performance evaluations, and opacity and visible emission observations.
NR 460.09(2)(b)9.
9. All measurements as may be necessary to determine the conditions of performance tests and performance evaluations.
NR 460.09(2)(b)11.
11. All adjustments and maintenance performed on continuous monitoring systems.
NR 460.09(2)(b)12.
12. Any information demonstrating whether a source is meeting the requirements for a waiver of recordkeeping or reporting requirements under
40 CFR part 63 or
chs. NR 460 to
469, if the source has been granted a waiver under
sub. (6).
NR 460.09(2)(b)13.
13. All emission levels relative to the criterion for obtaining permission to use an alternative to the relative accuracy test, if the source has been granted permission under
s. NR 460.07 (6) (e).
NR 460.09(2)(c)
(c) Recordkeeping requirements for applicability determinations. If an owner or operator determines that his or her stationary source that emits, or has the potential to emit, without considering controls, one or more hazardous air pollutants regulated by any standard established pursuant to section 112 (d) or (f) of the Act (
42 USC 7412 (d) or (f)), and that stationary source is in the source category regulated by the relevant standard, but that source is not subject to the relevant standard or other requirement established under
40 CFR part 63 or
chs. NR 460 to
469, because of limitations on the source's potential to emit or an exclusion, the owner or operator shall keep a record of the applicability determination on site at the source for a period of 5 years after the determination, or until the source changes its operations to become an affected source, whichever comes first. The record of the applicability determination shall be signed by the person making the determination and include an analysis or other information that demonstrates why the owner or operator believes the source is not an affected source. The analysis or other information shall be sufficiently detailed to allow the department to make a finding about the source's applicability status with regard to the relevant standard or other requirement. If relevant, the analysis shall be performed in accordance with requirements established in relevant subparts of
40 CFR part 63 for this purpose for particular categories of stationary sources. If relevant, the analysis should be performed in accordance with EPA guidance materials published to assist sources in making applicability determinations under section 112 of the Act (
42 USC 7412), if any. The requirements to determine applicability of a standard under
40 CFR 63.1 (b) (3) and to record the results of that determination under this paragraph do not by themselves create an obligation for the owner or operator to obtain a title V permit.
NR 460.09(3)
(3) Additional recordkeeping requirements for sources with continuous monitoring systems. NR 460.09(3)(a)(a) In addition to complying with the requirements specified in
sub. (2) (a) and
(b), the owner or operator of an affected source required to install a continuous monitoring system by a relevant standard shall maintain records for the source of all of the following:
NR 460.09(3)(a)1.
1. All required continuous monitoring system measurements, including monitoring data recorded during unavoidable continuous monitoring system breakdowns and out-of-control periods.
NR 460.09(3)(a)2.
2. The date and time identifying each period during which the continuous monitoring system was inoperative except for zero (low-level) and high-level checks.
NR 460.09(3)(a)4.
4. The specific identification, including date and times, of each period of excess emissions and parameter monitoring exceedances, as defined in the relevant standards, that occurs during startups, shutdowns and malfunctions of the affected source.
NR 460.09(3)(a)5.
5. The specific identification, including the date and times, of each period of excess emissions and parameter monitoring exceedances, as defined in the relevant standards, that occurs during periods other than startups, shutdowns and malfunctions of the affected source.
NR 460.09(3)(a)8.
8. The nature of the repairs or adjustments to the continuous monitoring system that was inoperative or out of control.
NR 460.09(3)(a)10.
10. All procedures that are part of a quality control program developed and implemented for the continuous monitoring system under
s. NR 460.07 (4).
NR 460.09(3)(b)
(b) In order to satisfy the requirements of
par. (a) 6. to
8. and to avoid duplicative recordkeeping efforts, the owner or operator may use the affected source's startup, shutdown and malfunction plan or records kept to satisfy the recordkeeping requirements of the startup, shutdown and malfunction plan specified in
s. NR 460.05 (4), provided that the plan and records adequately address the requirements of
par. (a) 6. to
8.
NR 460.09(4)(a)(a)
General. Notwithstanding the requirements in this subsection or
sub. (5), and except as provided in
s. NR 460.11, the owner or operator of an affected source subject to reporting requirements under
40 CFR part 63 or under
chs. NR 460 to
469 shall submit reports to the department in accordance with the reporting requirements in the relevant standards.
NR 460.09(4)(b)
(b)
Reporting results of performance tests. The owner or operator of an affected source shall report the results of any performance test under
s. NR 460.06 to the department. The owner or operator of an affected source shall report the results of the performance test to the department before the close of business on the 60th day following the completion of the performance test, unless specified otherwise in a relevant standard or as approved otherwise in writing by the department. The results of the performance test shall be submitted as part of the notification of compliance status required under
s. NR 460.08 (8).
NR 460.09(4)(c)
(c)
Reporting results of opacity or visible emission observations. The owner or operator of an affected source required to conduct opacity or visible emission observations by a relevant standard shall report the opacity or visible emission results, produced using Method 9 or Method 22 in Appendix A of
40 CFR part 60, incorporated by reference in
s. NR 484.04 (13), or an alternative to these test methods, along with the results of the performance test required under
s. NR 460.06. If no performance test is required, or if visibility or other conditions prevent the opacity or visible emission observations from being conducted concurrently with the performance test required under
s. NR 460.06, the owner or operator shall report the opacity or visible emission results before the close of business on the 30th day following the completion of the opacity or visible emission observations.
NR 460.09(4)(d)
(d)
Progress reports. The owner or operator of an affected source who is required to submit progress reports as a condition of receiving a compliance date extension under
s. NR 460.05 (7) shall submit the reports to the department by the dates specified in the written compliance date extension.
NR 460.09(4)(e)1.1. `Periodic reports.' If actions taken by an owner or operator during a startup or shutdown of an affected source, and the startup or shutdown causes the source to exceed any applicable emission limit in the relevant emission standards, or during a malfunction of an affected source, including actions taken to correct a malfunction, are consistent with the procedures specified in the source's startup, shutdown and malfunction plan as required in
s. NR 460.05 (4) (c), the owner or operator shall state the information in a startup, shutdown and malfunction report. Actions taken to minimize emissions during startups, shutdowns and malfunctions shall be summarized in the report and may be done in checklist form. If actions taken are the same for each event, only one checklist is necessary. The report shall also include the number, duration and a brief description for each type of malfunction which occurred during the reporting period and which caused or may have caused any applicable emission limitation to be exceeded. Reports shall only be required if a startup or shutdown caused the source to exceed any applicable emission limitation in the relevant emission standards or if a malfunction occurred during the reporting period. The startup, shutdown and malfunction report shall consist of a letter, containing the name, title and signature of the owner or operator or other responsible official who is certifying its accuracy, that shall be submitted to the department semiannually, or on a more frequent basis if specified otherwise in a relevant standard or as established otherwise in the source's part 70 permit. The startup, shutdown and malfunction report shall be delivered or postmarked by the 30th day following the end of each calendar half, or other calendar reporting period, as appropriate. If the owner or operator is required to submit excess emissions and continuous monitoring system performance, or other periodic, reports under
40 CFR part 63 or
chs. NR 460 to
469, the startup, shutdown and malfunction reports required under this subsection may be submitted simultaneously with the excess emissions and continuous monitoring system performance or other reports. If startup, shutdown and malfunction reports are submitted with excess emissions and continuous monitoring system performance or other periodic reports, and the owner or operator receives approval to reduce the frequency of reporting for the latter under
sub. (5), the frequency of reporting for the startup, shutdown and malfunction reports also may be reduced if the department does not object to the intended change. The procedures to implement the allowance in the preceding sentence shall be the same as the procedures specified in
sub. (5) (c).
NR 460.09(4)(e)2.
2. `Immediate reports.' Notwithstanding the allowance to reduce the frequency of reporting for periodic startup, shutdown and malfunction reports under
subd. 1., any time an action taken by an owner or operator during a startup or shutdown that caused the source to exceed any applicable emission limitation in the relevant emission standards or during a malfunction, including actions taken to correct a malfunction, is not consistent with the procedures specified in the affected source's startup, shutdown and malfunction plan, the owner or operator shall report the actions taken for that event within 2 working days after commencing actions inconsistent with the plan followed by a letter within 7 working days after the end of the event. The immediate report required under this subdivision shall consist of a telephone call or facsimile (FAX) transmission to the department within 2 working days after commencing actions inconsistent with the plan, and it shall be followed by a letter, delivered or postmarked within 7 working days after the end of the event, that contains the name, title and signature of the owner or operator or other responsible official who is certifying its accuracy, explaining the circumstances of the event, the reasons for not following the startup, shutdown and malfunction plan, describing all excess emissions or parameter monitoring exceedances or both which are believed to have occurred, or could have occurred in the case of malfunctions, and actions taken to minimize emissions in conformance with
s. NR 460.05 (4) (a) 1.
NR 460.09(4)(e)3.
3. `Alternative reporting arrangements.' Notwithstanding the requirements of
subd. 2., the owner or operator may make alternative reporting arrangements, in advance, with the department. Procedures governing the arrangement of alternative reporting requirements under this subsection are specified in
s. NR 460.08 (9).
NR 460.09(5)
(5) Additional reporting requirements for sources with continuous monitoring systems. NR 460.09(5)(a)(a)
General. When more than one CEMS is used to measure the emissions from one affected source, due to multiple breechings or outlets, for example, the owner or operator shall report the results as required for each CEMS.
NR 460.09(5)(b)
(b)
Reporting results of continuous monitoring system performance evaluations. NR 460.09(5)(b)1.1. The owner or operator of an affected source required to install a continuous monitoring system by a relevant standard shall furnish the department a copy of a written report of the results of the continuous monitoring system performance evaluation, as required under
s. NR 460.07 (5), simultaneously with the results of the performance test required under
s. NR 460.06, unless otherwise specified in the relevant standard.
NR 460.09(5)(b)2.
2. The owner or operator of an affected source using a continuous opacity monitoring system to determine opacity compliance during any performance test required under
s. NR 460.06 shall furnish the department 2 or, upon request, 3 copies of a written report of the results of the continuous opacity monitoring system performance evaluation conducted under
s. NR 460.07 (5). The copies shall be furnished at least 15 calendar days before the performance test required under
s. NR 460.06 is conducted.
NR 460.09(5)(c)
(c)
Excess emissions and continuous monitoring system performance report and summary report. NR 460.09(5)(c)1.1. Excess emissions and parameter monitoring exceedances are defined in relevant standards. The owner or operator of an affected source required to install a continuous monitoring system by a relevant standard shall submit an excess emissions and continuous monitoring system performance report or a summary report or both to the department semiannually, except when any of the following occur:
NR 460.09(5)(c)1.a.
a. More frequent reporting is specifically required by a relevant standard.
NR 460.09(5)(c)1.b.
b. The department determines on a case-by-case basis that more frequent reporting is necessary to accurately assess the compliance status of the source.
NR 460.09(5)(c)1.c.
c. The affected source is complying with the Performance Track provisions of
s. NR 460.11, which allows less frequent reporting.
NR 460.09(5)(c)2.
2. Notwithstanding the frequency of reporting requirements specified in
subd. 1., an owner or operator who is required by a relevant standard to submit excess emissions and continuous monitoring system performance and summary reports on a quarterly or more frequent basis may reduce the frequency of reporting for that standard to semiannual if all of the following conditions are met:
NR 460.09(5)(c)2.a.
a. For 1 full year, the affected source's excess emissions and continuous monitoring system performance reports, which may be quarterly or monthly, continually demonstrate that the source is in compliance with the relevant standard.
NR 460.09(5)(c)2.b.
b. The owner or operator continues to comply with all recordkeeping and monitoring requirements specified in this chapter and the relevant standard.
NR 460.09(5)(c)2.c.
c. The department does not object to a reduced frequency of reporting for the affected source, as provided in
subd. 3.
NR 460.09(5)(c)3.
3. The frequency of reporting of excess emissions and continuous monitoring system performance and summary reports required to comply with a relevant standard may be reduced only after the owner or operator notifies the department in writing of his or her intention to make a change and the department does not object to the intended change. In deciding whether to approve a reduced frequency of reporting, the department may review information concerning the source's entire previous performance history during the 5-year recordkeeping period prior to the intended change, including performance test results, monitoring data, and evaluations of an owner or operator's conformance with operation and maintenance requirements. The information may be used by the department to make a judgment about the source's potential for noncompliance in the future. If the department disapproves the owner or operator's request to reduce the frequency of reporting, the department shall notify the owner or operator in writing within 45 days after receiving notice of the owner or operator's intention. The notification from the department to the owner or operator shall specify the grounds on which the disapproval is based. In the absence of a notice of disapproval within 45 days, approval is automatically granted.
NR 460.09(5)(c)4.
4. As soon as continuous monitoring system data indicate that the source is not in compliance with any emission limitation or operating parameter specified in the relevant standard, the frequency of reporting shall revert to the frequency specified in the relevant standard, and the owner or operator shall submit an excess emissions and continuous monitoring system performance report and summary report for the noncomplying emission points at the next appropriate reporting period following the noncomplying event. After demonstrating ongoing compliance with the relevant standard for another full year, the owner or operator may again request approval from the department to reduce the frequency of reporting for that standard, as provided for in
subds. 2. and
3.
NR 460.09(5)(c)5.
5. All excess emissions and monitoring system performance reports and all summary reports, if required, shall be delivered or postmarked by the 30th day following the end of each calendar half or quarter, as appropriate. Written reports of excess emissions or exceedances of process or control system parameters shall include all the information required in
sub. (3) (a) 2. to
8., in
s. NR 460.07 (3) (g) and
(h), and in the relevant standard, and they shall contain the name, title and signature of the responsible official who is certifying the accuracy of the report. When no excess emissions or exceedances of a parameter have occurred, or a continuous monitoring system has not been inoperative, out of control, repaired or adjusted, this information shall be stated in the report.
NR 460.09(5)(c)6.
6. As required under
subds. 7. and
8., one summary report shall be submitted for the hazardous air pollutants monitored at each affected source, unless the relevant standard specifies that more than one summary report is required, such as one summary report for each hazardous air pollutant monitored. The summary report shall be entitled “Summary Report - Gaseous and Opacity Excess Emission and Continuous Monitoring System Performance" and shall contain all of the following information:
NR 460.09(5)(c)6.b.
b. An identification of each hazardous air pollutant monitored at the affected source.
NR 460.09(5)(c)6.e.
e. The emission and operating parameter limitations specified in the relevant standards.
NR 460.09(5)(c)6.g.
g. The date of the latest continuous monitoring system certification or audit.
