Register April 2008 No. 628
Chapter NR 466
NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR PRINTING AND FLEXIBLE SUBSTRATE SURFACE COATING PROCESSES
Subchapter I — Printing and Publishing
NR 466.01   Applicability; purpose.
NR 466.015   Designation of affected sources.
NR 466.02   Definitions.
NR 466.03   Symbols.
NR 466.05   Standards: general.
NR 466.06   Standards: publication rotogravure printing.
NR 466.07   Standards: product and packaging rotogravure and wide-web flexographic printing.
NR 466.08   Compliance dates.
NR 466.09   Performance test methods.
NR 466.10   Monitoring requirements.
NR 466.11   Recordkeeping requirements.
NR 466.12   Reporting requirements.
Subchapter III — Paper and Other Web Coating
NR 466.21   What this subchapter covers.
NR 466.22   What definitions are used in this subchapter?
NR 466.23   Emission standards and compliance dates.
NR 466.24   General requirements for compliance with the emission standards and for monitoring and performance tests.
NR 466.25   Requirements for showing compliance.
NR 466.26   Notifications, reports and records.
subch. I of ch. NR 466 Subchapter I — Printing and Publishing
NR 466.01 NR 466.01Applicability; purpose.
NR 466.01(1) (1)Applicability.
NR 466.01(1)(a)(a) This chapter applies to all of the following:
NR 466.01(1)(a)1. 1. Each facility that is a major source of hazardous air pollutants at which publication rotogravure, product and packaging rotogravure, or wide-web flexographic printing presses are operated.
NR 466.01(1)(a)2. 2. Each facility at which publication rotogravure, product and packaging rotogravure, or wide-web flexographic printing presses are operated for which the owner or operator, for purposes of establishing the facility to be an area source with respect to this chapter, chooses to commit to, and meets the following criteria:
NR 466.01(1)(a)2.a. a. Use less than 9.1 Mg (10 tons) per each rolling 12-month period of each HAP at the facility, including materials used for source categories or purposes other than printing and publishing.
NR 466.01(1)(a)2.b. b. Use less than 22.7 Mg (25 tons) per each rolling 12-month period of any combination of HAPs at the facility, including materials used for source categories or purposes other than printing and publishing.
NR 466.01(1)(b) (b) Each facility for which the owner or operator chooses to commit to and meets the criteria in par. (a) 2. shall be considered an area source, and is subject only to the provisions of ss. NR 466.11 (4) and 466.12 (2) (a).
NR 466.01(1)(c) (c) Each facility for which the owner or operator chooses to commit to and meets the criteria in par. (a) 2. may exclude, for the purpose of determining compliance with the usage restrictions in par. (a) 2., material used in routine janitorial or facility grounds maintenance, personal uses by employees or other persons, the use of products for the purpose of maintaining electric, propane, gasoline and diesel powered motor vehicles operated by the facility, and the use of HAP contained in intake water, used for processing or noncontact cooling, or intake air, used either as compressed air or for combustion.
NR 466.01(1)(d) (d) Each facility for which the owner or operator chooses to commit to and meets the criteria in par. (a) 2. to become an area source, but subsequently exceeds either of the thresholds in par. (a) 2. for any rolling 12-month period, without first obtaining and complying with other limits that keep its potential to emit HAP below major source levels, shall be considered in violation of its commitment for that 12-month period and shall be considered a major source of HAP beginning the first month after the end of the 12-month period in which either of the HAP-use thresholds was exceeded. As a major source of HAP, each facility is subject to this chapter as provided under par. (a) 1. and is no longer eligible to use the provisions of par. (a) 2., even if in subsequent 12-month periods the facility uses less HAP than the thresholds in par. (a) 2.
NR 466.01(1)(e) (e) An owner or operator of an affected source subject to par. (a) 2. who chooses to no longer be subject to par. (a) 2. shall notify the department of the change. If, by no longer being subject to par. (a) 2., the facility at which the affected source is located becomes a major source, the owner or operator shall continue to comply with the HAP usage provisions of par. (a) 2. until the source is in compliance with all relevant requirements for a new MACT source or an existing source under this chapter.
NR 466.01(1)(f) (f) Nothing in this subsection is intended to preclude a facility from establishing area source status by limiting its potential to emit through other appropriate mechanisms.
NR 466.01(1)(g) (g) This chapter does not apply to research or laboratory equipment.
NR 466.01(2) (2)Purpose. This chapter is adopted under ss. 285.27 (2) and 285.65, Stats., to establish emission standards for hazardous air pollutants for the printing and publishing industry in order to protect air quality.
NR 466.01 Note Note: This chapter is based on the federal regulations contained in 40 CFR part 63 Subpart KK, created May 30, 1996.
NR 466.01 History History: Cr. Register, March, 2000, No. 531, eff. 4-1-00.
NR 466.015 NR 466.015Designation of affected sources.
NR 466.015(1)(1) The affected sources subject to this chapter are all of the following:
NR 466.015(1)(a) (a) All of the publication rotogravure presses and all associated equipment, including proof presses, cylinder and parts cleaners, ink and solvent mixing and storage equipment, and solvent recovery equipment at a facility.
NR 466.015(1)(b) (b) All of the product and packaging rotogravure or wide-web flexographic printing presses at a facility plus any other equipment at that facility which the owner or operator chooses to include in accordance with sub. (2), except any of the following:
NR 466.015(1)(b)1. 1. Proof presses.
NR 466.015(1)(b)2. 2. Any product and packaging rotogravure or wide-web flexographic press which is used primarily for coating, laminating or other operations which the owner or operator chooses to exclude, provided that the owner or operator maintains records as required under s. NR 466.11 (6), and the sum of the total mass of inks, coatings, varnishes, adhesives, primers, solvents, thinners, reducers and other materials applied by the press using product and packaging rotogravure print stations and wide-web flexographic print stations in each month never exceeds 5% by weight of the total mass of inks, coatings, varnishes, adhesives, primers, solvents, thinners, reducers and other materials applied by the press in that month, including all inboard and outboard stations.
NR 466.015(2) (2) The owner or operator of an affected source, as defined in sub. (1) (b), may elect to include in that affected source stand-alone coating equipment subject to all of the following provisions:
NR 466.015(2)(a) (a) All stand-alone coating equipment which is located at the facility, and which is described by any of the following, is included in the affected source:
NR 466.015(2)(a)1. 1. The stand-alone coating equipment and one or more product and packaging rotogravure or wide-web flexographic presses are used to apply solids-containing materials to the same web or substrate.
NR 466.015(2)(a)2. 2. The stand-alone coating equipment and one or more product and packaging rotogravure or wide-web flexographic presses apply a common solids-containing material.
NR 466.015(2)(a)3. 3. A common control device is used to control organic HAP emissions from the stand-alone coating equipment and from one or more product and packaging rotogravure or wide-web flexographic printing presses.
NR 466.015(2)(b) (b) No product and packaging rotogravure or wide-web flexographic presses are excluded from the affected source under the provisions of sub. (1) (b) 2.
NR 466.015(3) (3) Each product and packaging rotogravure or wide-web flexographic printing affected source at a facility that is a major source of HAP that complies with either of the following criteria on and after the applicable compliance date as specified in s. NR 466.08 is subject only to the requirements of ss. NR 466.11 (5) and 466.12 (2) (a):
NR 466.015(3)(a) (a) The owner or operator of the source applies no more than 500 kg (1102 pounds) per month, for every month, of inks, coatings, varnishes, adhesives, primers, solvents, thinners, reducers and other materials on product and packaging rotogravure or wide-web flexographic printing presses.
NR 466.015(3)(b) (b) The owner or operator of the source applies no more than 400 kg (882 pounds) per month, for every month, of organic HAP on product and packaging rotogravure or wide-web flexographic printing presses.
NR 466.015(4) (4) Each product and packaging rotogravure or wide-web flexographic printing affected source at a facility that is a major source of HAP that does not comply with either criterion in sub. (3) in any month after the applicable compliance date as specified in s. NR 466.08 is, starting with that month, subject to all relevant requirements of this chapter and is no longer eligible to use the provisions of sub. (3), even if in subsequent months the affected source meets either of the criteria in sub. (3).
NR 466.015 History History: Cr. Register, March, 2000, No. 531, eff. 4-1-00.
NR 466.02 NR 466.02Definitions. For terms not defined in this section, the definitions contained in chs. NR 400 and 460 apply to the terms used in this chapter, with definitions in ch. NR 460 taking priority over definitions in ch. NR 400. If this section defines a term which is also defined in ch. NR 400 or 460, the definition in this section applies in this chapter.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.