Amendment ASA1-AB735

LRBs0501/1

JK:cjs:pg

2005 - 2006 LEGISLATURE

ASSEMBLY SUBSTITUTE AMENDMENT 1, TO 2005 ASSEMBLY BILL 735

February 8, 2006 - Offered by Committee on Ways and Means.

AB735-ASA1,1,2 An Act to create 101.02 (22) of the statutes; relating to: a standard building permit designation for the use of insulating concrete forms.

The people of the state of Wisconsin, represented in senate and assembly, do enact as follows:

AB735-ASA1, s. 1 Section 1. 101.02 (22) of the statutes is created to read:

AB735-ASA1,1,5 101.02 (22) (a) In this subsection, "insulating concrete form" means a hollow expandable polystyrene form that is designed to be filled with concrete.

AB735-ASA1,1,11 (b) Except as provided in par. (c), no later than the first day of the 12th month beginning after the effective date of this paragraph .... [revisor inserts date], the department shall provide a designation on every standard building permit form or format prescribed and furnished under this chapter to indicate whether insulating concrete forms are being used in the construction of the building for which the permit is issued.

AB735-ASA1,2,4 (c) No later than the first day of the 2nd month beginning after the effective date of this paragraph .... [revisor inserts date], the department shall provide the designation described under par. (a) on all electronic versions of every standard building permit form or format prescribed and furnished under this chapter.

AB735-ASA1,2,5 (End)