84.095(4)(a)8.
8. The existing and new locations of the transportation facility.
84.095(4)(a)9.
9. The delineation of each parcel. For each parcel, a complete description of the following shall be included:
84.095(4)(a)11.
11. Reference to platted land surveys or other surveys of record and the locations of known monuments established for such surveys.
84.095(4)(b)
(b) In addition to the information required under
par. (a), a plat for a highway project shall include the following:
84.095(4)(b)1.
1. The designation of the highway and any adjacent or intersecting streets or highways by name, number or letter.
84.095(4)(b)2.
2. A description of the reference line for the highway by bearing and distance.
84.095(4)(b)3.
3. The location of the highway reference line by bearing and distance from a boundary line of a section, if known, or from a recorded private claim or federal reservation.
84.095(4)(b)4.
4. A description of the highway right-of-way boundaries by bearing and distance.
84.095(4)(b)5.
5. The locations of existing reference lines and right-of-way lines.
84.095(4)(c)
(c) Notwithstanding its depiction on a plat, the boundary of a parcel extends to the boundary of the adjoining property parcel or body of water.
84.095(5)
(5) Surveyor's certificate. A plat prepared for filing or recording under this section shall include a certificate of a land surveyor registered under
s. 443.06 that the plat is a correct representation of the project described and that the identification and location of each parcel can be determined from the plat. This subsection does not apply to plats prepared by the department.
84.095(6)(a)(a) No plat may be filed or recorded in the office of a register of deeds unless the plat has a binding margin of 1.5 inches wide and a one-inch margin on all other sides, and is printed on muslin-backed white paper that is 22 inches wide by 30 inches long with nonfading black image or reproduced with photographic silver haloid image on double matt polyester film of not less than 4 mil thickness. A plat that is submitted for filing or recording shall contain a blank space at least 2.5 inches by 2.5 inches in size for use by the register of deeds.
84.095(7)
(7) Description for parcels and remainder interests. 84.095(7)(a)(a) Whenever a plat has been filed or recorded under this section, any parcel depicted in the plat that is acquired for a project by conveyance or eminent domain proceedings shall be described as follows:
Parcel .... (number) of transportation project plat .... (project number), recorded in volume .... (number) of transportation project plats, page .... (number), on .... (date), .... (county name) register of deeds, and located in .... (quarter section, section, township and range; recorded private claim; or federal reservation).
84.095(7)(c)
(c) Subsequent conveyances, mortgages and other instruments concerning a remainder interest may refer to the parcel description in
par. (a) as an exception to the conveyance.
84.095(8)(a)(a) The register of deeds shall index plats filed or recorded under this section in the manner described in
s. 59.43 (12m), whether or not the county board has enacted an ordinance requiring such an index.
84.095(8)(b)
(b) Within 3 working days after the date on which a plat is submitted for recording under this section, the register of deeds shall assign a document number and volume and page of recording for the plat and, if the person submits with the plat a properly addressed postcard for which postage had been paid, shall provide written notice of such information to the person who submitted the plat.
84.095(9)
(9) Local review. No state agency, city, village, town or county may require the review or approval of a plat as a condition of filing or recording the plat if the plat is prepared in accordance with this section.