DOC 350.04(1)(1) Before design development begins, a county that intends to build or remodel a jail shall file a letter of intent with the department’s regional detention facilities specialist. DOC 350.04(2)(2) Copies of original and updated drawings of the area within the secure perimeter of the jail shall be submitted to the department’s regional detention facilities specialist at the same time the drawings are submitted to the county. DOC 350.04(3)(3) All sites, plans, and specifications for construction or remodeling of a jail shall comply with the Wisconsin commercial building code. DOC 350.04(4)(4) Prior to publication of bid documents, one complete set of plans and specifications shall be forwarded to the department for review and approval. DOC 350.04(5)(5) Any proposed changes to the approved plans must be submitted to the department for review and approval. DOC 350.04 HistoryHistory: Cr. Register, February, 1990, No. 410, eff. 3-1-90; corrections in (3) and (4) made under s. 13.93 (2m) (b) 6. and 7., Stats., Register, June, 1999, No. 522; corrections in (3) and (4) made under s. 13.93 (2m) (b) 7., Stats., Register December 2006 No. 612; corrections in (3) and (4) made under s. 13.92 (4) (b) 6., 7., Stats., Register January 2012 No. 673; CR 13-038: r. and recr. Register August 2014 No. 704, eff. 9-1-14. DOC 350.05DOC 350.05 Physical environment for new or substantially remodeled jails. DOC 350.05(1)(1) Applicability. This section applies only to jails that are constructed or substantially remodeled on or after September 1, 2014. DOC 350.05(2)(2) Furniture and fixtures. Furniture and fixtures used in a jail shall be of detention strength materials and manufactured, sold, and installed by firms that specialize in detention equipment or ordered from a firm that will follow the specifications for detention strength equipment in this chapter, including all of the following: