134.77(2)(b)1. 1. Is sealed with laminated tape, foil or other soft material that is detachable.
134.77(2)(b)2. 2. Contains milk-based, soy-based or similar products which require heat and pressure in the canning process.
134.77(3) (3) Plastic connectors. No person may sell or offer for sale at retail in this state any beverage container if the beverage container is connected to another beverage container by means of a device constructed of a material which does not decompose by photodegradation or biodegradation within a reasonable time after exposure to weather elements.
134.77(4) (4) Penalty. Any person who violates sub. (2) or (3) shall forfeit not more than $500 for each violation. Each day of violation constitutes a separate offense.
134.77 History History: 1987 a. 108.
134.80 134.80 Home heating fuel dealers. Any dealer selling fuel of any kind for the purpose of heating a private residence shall notify each private residential customer whose account is subject to disconnection of the existence of the fuel assistance programs provided by the department of administration under s. 16.27.
134.80 History History: 1977 c. 418; 1981 c. 20; 1995 a. 27 s. 9126 (19); 1995 a. 417; 2003 a. 33.
134.81 134.81 Water heater thermostat settings. No person who manufactures water heaters may sell any new water heater designed for use in a dwelling unit, as defined in s. 101.61 (1), unless that person does all of the following:
134.81(1) (1)Sets the thermostat of the water heater at no higher than 125 degrees Fahrenheit or at the minimum setting of that water heater if the minimum setting is higher than 125 degrees Fahrenheit.
134.81(2) (2)Attaches a plainly visible notice to the water heater warning that any thermostat setting above 125 degrees Fahrenheit may cause severe burns and consume energy unnecessarily.
134.81 History History: 1987 a. 102.
134.85 134.85 Automated teller machines; international charges.
134.85(1)(1)In this section:
134.85(1)(a) (a) “Automated teller machine" means any electronic information processing device located in this state that accepts or dispenses cash in connection with a credit, deposit, or other account. “Automated teller machine" does not include a device that is used solely to facilitate check guarantees or check authorizations, or that is used in connection with the acceptance or dispensing of cash on a person-to-person basis.
134.85(1)(b) (b) “Foreign account" means an account with a financial institution located outside the United States.
134.85(2) (2)An agreement to operate or share an automated teller machine may not prohibit an owner or operator of the automated teller machine from imposing on an individual who conducts a transaction using a foreign account an access fee or surcharge that is not otherwise prohibited under federal or state law.
134.85 History History: 2007 a. 48.
134.87 134.87 Repair, replacement and refund under new motorized wheelchair warranties.
134.87(1)(1)In this section:
134.87(1)(a) (a) “Collateral costs" means expenses incurred by a consumer in connection with the repair of a nonconformity, including the costs of obtaining an alternative wheelchair or other assistive device for mobility.
134.87(1)(b) (b) “Consumer" means any of the following:
134.87(1)(b)1. 1. The purchaser of a motorized wheelchair, if the motorized wheelchair was purchased from a motorized wheelchair dealer or manufacturer for purposes other than resale.
134.87(1)(b)2. 2. A person to whom the motorized wheelchair is transferred for purposes other than resale, if the transfer occurs before the expiration of an express warranty applicable to the motorized wheelchair.
134.87(1)(b)3. 3. A person who may enforce the warranty.
134.87(1)(b)4. 4. A person who leases a motorized wheelchair from a motorized wheelchair lessor under a written lease.
134.87(1)(c) (c) “Demonstrator" means a motorized wheelchair used primarily for the purpose of demonstration to the public.
134.87(1)(d) (d) “Early termination cost" means any expense or obligation that a motorized wheelchair lessor incurs as a result of both the termination of a written lease before the termination date set forth in that lease and the return of a motorized wheelchair to a manufacturer under sub. (3) (b) 3. “Early termination cost" includes a penalty for prepayment under a finance arrangement.
134.87(1)(e) (e) “Early termination savings" means any expense or obligation that a motorized wheelchair lessor avoids as a result of both the termination of a written lease before the termination date set forth in that lease and the return of a motorized wheelchair to a manufacturer under sub. (3) (b) 3. “Early termination savings" includes an interest charge that the motorized wheelchair lessor would have paid to finance the motorized wheelchair or, if the motorized wheelchair lessor does not finance the motorized wheelchair, the difference between the total amount for which the lease obligates the consumer during the period of the lease term remaining after the early termination and the present value of that amount at the date of the early termination.
134.87(1)(f) (f) “Manufacturer" means a person who manufactures or assembles motorized wheelchairs and agents of that person, including an importer, a distributor, factory branch, distributor branch and any warrantors of the manufacturer's motorized wheelchairs, but does not include a motorized wheelchair dealer.