Trans 200.06(7)(b)1.1. Single-exit interchanges. At single-exit interchanges, the name of the type of motorist service followed by the exit number shall be displayed in one line above the business signs. At unnumbered interchanges, the directional legend “NEXT RIGHT (LEFT)” shall be substituted for the exit number.

Trans 200.06(7)(b)2.2. Double-exit interchanges. At double-exit interchanges, the specific information signs shall consist of 2 sections, one for each exit. The top section shall display the business signs for the first exit and the lower section shall display the business signs for the second exit. No more than one-half of the maximum number of signs permitted at an intersection shall be permitted for each exit. The name of the type of motorist service followed by the exit number shall be displayed in a line above the business signs in each section. At unnumbered interchanges, the legends “NEXT RIGHT (LEFT)” and “SECOND RIGHT (LEFT)” shall be substituted for the exit numbers. Where a type of motorist service is to be signed for at only one exit, one section of the specific information sign may be omitted. The number of business signs, total of both sections, shall be limited to the number specified in s. 86.195 (5) (b), Stats.

Trans 200.06(7)(b)3.3. Interchanges with fewer facilities.

Trans 200.06(7)(b)3.a.a. At interchanges where not more than 3 qualified facilities are available for each of 2 or more types of motorist services, business signs for 2 types of motorist services may be displayed on the same specific information sign. When 2 types of motorist services are displayed on one sign, the business sign panels shall be limited to 3 for each motorist service type, or 4 for one motorist service type and 2 for the other motorist service type. Not more than 6 business sign panels may be displayed on one specific information sign.

Trans 200.06(7)(b)3.b.b. At interchanges where not more than 2 qualified facilities are available for each of 3 or more types of motorist services, business signs for 3 types of motorist services may be displayed on the same specific information sign. Not more than 2 business signs for each type of motorist service may be displayed in combination on a specific information sign with 3 types of motorist services. When it becomes necessary to display a third business sign for a type of motorist service displayed in combination, the business signs involved shall then be displayed in compliance with subd. 1., 2. or 3. a.

Trans 200.06(7)(b)3.c.c. The name of each type of motorist service shall be displayed above its respective business signs, and the exit number shall be displayed above the names of the types of motorist services. At unnumbered interchanges, the legend “NEXT RIGHT (LEFT)” shall be substituted for the exit number. Business signs shall not be combined on a specific information sign when it is anticipated that additional motorist service facilities will become available in the near future.

Trans 200.06(7)(c)1.1. Business sign size. Each business sign displayed on a “GAS” specific information sign shall be contained within a 48-inch-wide and 36-inch-high rectangular background area, including border. Each business sign displayed on a “FOOD,” “LODGING,” “CAMPING” OR “ATTRACTION” specific information sign shall be contained within a 60-inch-wide and 36-inch-high rectangular background area, including border. If 2 business signs are displayed for 3 different types of motorist services on one specific information sign, the business sign size shall be contained within a 48-inch-wide and 36-inch-high rectangular background area, including border.

Trans 200.06 NoteNote: After August 1, 2007, the Department may require all newly-erected or replacement specific information signs to contain business signs within a 48-inch wide and 36-inch high rectangular background area, including border, in order to accommodate the newly added ATTRACTIONS category of signs.

Trans 200.06(7)(c)2.2. Legends. All letters used in the name of the type of motorist service and the directional legend shall be 10-inch capital letters. Numbers shall be 10 inches in height.

Trans 200.06(8)(a)1.1. Interchanges. The location of specific information signs and exit ramp signs erected for interchanges shall be the same as for interstate highways and freeways under sub. (7) (a).

Trans 200.06(8)(a)2.2. Intersections. The locations of specific information signs, the spacing between specific information signs, and between specific information signs and other traffic control devices shall be determined on the basis of the department’s engineering study.

Trans 200.06(8)(b)(b) Sign composition. The composition of specific information signs and exit ramp signs erected for interchanges shall be the same as for interstate highways and freeways under sub. (7) (b).

Trans 200.06(8)(c)1.1. ‘Interchanges.’ Business signs shall conform to the sizes specified for interstate highways and freeways under sub. (7) (c) 1. Legends shall conform to the requirements for interstate highways and freeways under sub. (7) (c) 2.

Trans 200.06(8)(c)2.2. ‘Intersections.’ Each business sign shall be contained within a 36-inch-wide and 24-inch-high rectangular background area, including border. All letters used in the name of the type of motorist service and the directional legend shall be 6-inch capital letters.

Trans 200.06(9)(c)(c) Sign size. Each business sign shall be contained within a 24-inch-wide and 18-inch-high rectangular background area, including border. All letters used in the name of the type of motorist service and the directional legend shall be 4-inch capital letters.

Trans 200.06(10)(10) Compliance with federal law. The department may promulgate an emergency administrative rule under s. 227.24, Stats., that supersedes this chapter whenever federal standards become more restrictive than this chapter.