Register July 2017 No. 739
Chapter NR 661
HAZARDOUS WASTE IDENTIFICATION AND LISTING
Subchapter A — General
Purpose and scope.
Definition of solid waste.
Definition of hazardous waste.
Requirements for recyclable materials.
Residues of hazardous waste in empty containers.
PCB wastes regulated under federal toxic substances control act.
Requirements for universal waste.
Subchapter B — Criteria for Identifying the Characteristics of Hazardous Waste and for Listing Hazardous Waste
Criteria for identifying the characteristics of hazardous waste.
Criteria for listing hazardous waste.
Subchapter C — Characteristics of Hazardous Waste
Subchapter D — Lists of Hazardous Wastes
Hazardous wastes from non-specific sources.
Hazardous wastes from specific sources.
Discarded commercial chemical products, off-specification species, container residues and spill residues thereof.
Deletion of certain hazardous waste codes following equipment cleaning and replacement.
Subchapter E — Exclusions and Exemptions
Comparable or syngas fuel exclusion.
Conditional exclusion for used, broken cathode ray tubes (CRTs) and processed CRT glass undergoing recycling.
Conditional exclusion for used, intact cathode ray tubes (CRTs) exported for recycling.
Notification and recordkeeping for used, intact cathode ray tubes (CRTs) exported for reuse.
This chapter identifies those solid wastes which are subject to regulation as hazardous wastes under chs. NR 662
and which are subject to the notification requirements of s. NR 660.07
. In this chapter:
defines the terms “solid waste" and “hazardous waste", identifies those wastes which are excluded from regulation under chs. NR 662
and establishes special management requirements for hazardous waste which is recycled.
sets forth the criteria used by the department to identify characteristics of hazardous waste and to list particular hazardous wastes.
The definition of solid waste contained in this chapter applies only to wastes that also are hazardous for purposes of chs. NR 660
. For example, it does not apply to materials (such as non-hazardous scrap, paper, textiles or rubber) that are not otherwise hazardous wastes and that are recycled.
This chapter identifies only some of the materials which are solid wastes and hazardous wastes under ss. 291.15
, and 291.93
, Stats. A material which is not defined as a solid waste in this chapter, or is not a hazardous waste identified or listed in this chapter, is still a solid waste and a hazardous waste for purposes of these sections if any of the following are met:
A “spent material" is any material that has been used and as a result of contamination can no longer serve the purpose for which it was produced without processing.
A “by-product" is a material that is not one of the primary products of a production process and is not solely or separately produced by the production process. Examples are process residues such as slags or distillation column bottoms. The term does not include a co-product that is produced for the general public's use and is ordinarily used in the form it is produced by the process.
A material is “reclaimed" if it is processed to recover a usable product, or if it is regenerated. Examples are recovery of lead values from spent batteries and regeneration of spent solvents.
A material is “used or reused" if it is one of the following:
Employed as an ingredient (including use as an intermediate) in an industrial process to make a product (for example, distillation bottoms from one process used as feedstock in another process). However, a material will not satisfy this condition if distinct components of the material are recovered as separate end products (as when metals are recovered from metal-containing secondary materials).
Employed in a particular function or application as an effective substitute for a commercial product (for example, spent pickle liquor used as phosphorous precipitant and sludge conditioner in wastewater treatment).
“Scrap metal" is bits and pieces of metal parts (e.g., bars, turnings, rods, sheets, wire) or metal pieces that may be combined together with bolts or soldering (e.g., radiators, scrap automobiles, railroad box cars), which when worn or superfluous can be recycled.
A material is “recycled" if it is used, reused or reclaimed.
A material is “accumulated speculatively" if it is accumulated before being recycled. A material is not accumulated speculatively, however, if the person accumulating it can show that the material is potentially recyclable and has a feasible means of being recycled; and that during the calendar year (commencing on January 1) the amount of material that is recycled, or transferred to a different site for recycling, equals at least 75% by weight or volume of the amount of that material accumulated at the beginning of the period. In calculating the percentage of turnover, the 75% requirement is to be applied to each material of the same type (e.g., slags from a single smelting process) that is recycled in the same way (i.e., from which the same material is recovered or that is used in the same way). Materials accumulating in units that would be exempt from regulation under s. NR 661.04 (3)
are not to be included in making the calculation. (Materials that are already defined as solid wastes also are not to be included in making the calculation.) Materials are no longer in this category once they are removed from accumulation for recycling, however.
“Excluded scrap metal" is processed scrap metal, unprocessed home scrap metal and unprocessed prompt scrap metal.
“Processed scrap metal" is scrap metal which has been manually or physically altered to either separate it into distinct materials to enhance economic value or to improve the handling of materials. Processed scrap metal includes, but is not limited to scrap metal which has been baled, shredded, sheared, chopped, crushed, flattened, cut, melted or separated by metal type (i.e., sorted), and, fines, drosses and related materials which have been agglomerated. (Shredded circuit boards being sent for recycling are not processed scrap metal. They are covered under the exclusion from the definition of solid waste for shredded circuit boards being recycled (s. NR 661.04 (1) (n)
“Home scrap metal" is scrap metal as generated by steel mills, foundries and refineries such as turnings, cuttings, punchings and borings.