Amendment ASA1-AB928

AB928-ASA1,4,4 5. One member who represents an association that is involved in the building construction industry throughout the state and whose membership includes persons who employ operators of cranes and heavy equipment who are not members of local labor organizations, as defined in s. 111.32 (9) (a).

AB928-ASA1,4,5 6. The secretary of commerce or his or her designee.

AB928-ASA1,4,6 (b) The council shall meet at least 2 times a year.

AB928-ASA1, s. 2 Section 2. 101.02 (20) (a) of the statutes, as affected by 2009 Wisconsin Act 28, is amended to read:

AB928-ASA1,4,15 101.02 (20) (a) For purposes of this subsection, "license" means a license, permit, or certificate of certification or registration issued by the department under ss. 101.09 (3) (c), 101.122 (2) (c), 101.136, 101.138, 101.143 (2) (g), 101.147, 101.15 (2) (e), 101.16 (3g), 101.17, 101.177 (4) (a), 101.178 (2) or (3) (a), 101.63 (2) or (2m), 101.653, 101.73 (5) or (6), 101.82 (1m), (1v), and (2), 101.935, 101.95, 101.951, 101.952, 101.985 (1) to (3), 145.02 (4), 145.035, 145.045, 145.15, 145.16, 145.165, 145.17, 145.175, 145.18, or 167.10 (6m).

AB928-ASA1, s. 3 Section 3. 101.02 (21) (a) of the statutes, as affected by 2009 Wisconsin Act 28, is amended to read:

AB928-ASA1,4,24 101.02 (21) (a) In this subsection, "license" means a license, permit, or certificate of certification or registration issued by the department under s. 101.09 (3) (c), 101.122 (2) (c), 101.136, 101.138, 101.143 (2) (g), 101.147, 101.15 (2) (e), 101.16 (3g), 101.17, 101.177 (4) (a), 101.178 (2) or (3) (a), 101.63 (2), 101.653, 101.73 (5) or (6), 101.82 (1m), (1v), and (2), 101.935, 101.95, 101.951, 101.952, 101.985 (1) to (3), 145.02 (4), 145.035, 145.045, 145.15, 145.16, 145.165, 145.17, 145.175, 145.18, or 167.10 (6m).

AB928-ASA1, s. 4 Section 4. 101.138 of the statutes is created to read:

AB928-ASA1,5,2 101.138 Regulation of crane and heavy equipment operators. (1) Definitions. In this section:

AB928-ASA1,5,5 (ab) "Apprentice instruction" means receiving or giving instruction through a recognized apprenticeship program and includes classroom instruction, instruction in the field, and continuing education.

AB928-ASA1,5,6 (ad) "Council" means the crane and heavy equipment council.

AB928-ASA1,5,10 (ag) "Crane" means any power-operated hoisting machine that can lift, rotate, or move a suspended load horizontally or vertically, including a derrick, a jib hoist, and a gantry and any other type of power-operated hoisting machine designated by rule by the department.

AB928-ASA1,5,16 (am) "Exempt entity" means a public utility, as defined in s. 196.01 (5), a cooperative association organized under ch. 185 for the purpose of producing or furnishing heat, light, power, or water to its members only, a telecommunications carrier, as defined in s. 196.01 (8m), a commercial mobile radio service provider, as defined in s. 196.01 (2g), or an alternative telecommunications utility, as defined in s. 196.01 (1d) (f).

AB928-ASA1,5,22 (b) "Heavy equipment" means a piece of equipment that is not a crane, that has a dry weight, as determined by the manufacturer of the equipment, of 26,000 pounds or more, and that is used to move, compact, break, place, or grade construction materials, earth, or other heavy materials, that is used to clear or grade land, that is used to excavate or dig earth or other heavy materials, or that is used to drive vertically into the earth.

AB928-ASA1,5,23 (d) "Operate" means to operate, assemble, maintain, or disassemble.

AB928-ASA1,5,25 (e) "Public works project" means a project to which s. 66.0903, 103.49, or 103.50 applies.

AB928-ASA1,6,3 (eg) "Recognized apprenticeship program" means an apprenticeship program in the heavy equipment operating engineer program that is recognized by the U.S. department of labor.

AB928-ASA1,6,6 (er) "Registered training employer" means any person who is registered as a heavy equipment operating engineer trainer with the department of workforce development for the purpose of a recognized apprenticeship program.

AB928-ASA1,6,8 (f) "Regulated heavy equipment" means the types of heavy equipment that are designated by rule by the department under sub. (10) (b).

AB928-ASA1,6,10 (g) "Unregulated heavy equipment" means types of heavy equipment that are not designated by rule by the department under sub. (10) (b).

AB928-ASA1,6,17 (2) Licenses required. (a) Beginning on the first day of the 24th month beginning after the effective date of this paragraph .... [LRB inserts date], no individual may operate a crane for construction, renovation, grading, or demolition purposes unless the individual holds a valid license issued under sub. (4) or (6) or renewal under sub. (9). If an individual holds an apprentice license issued under sub. (6), he or she may not operate the crane unless he or she is being supervised by another individual who holds a valid crane operator license issued under sub. (4).

AB928-ASA1,6,25 (b) Beginning on the first day of the 24th month beginning after the effective date of this paragraph .... [LRB inserts date], no individual may operate a piece of regulated heavy equipment for construction, renovation, grading, or demolition purposes unless the individual holds a valid license issued under sub. (7) or (8) or renewal under sub. (9). If an individual holds an apprentice license issued under sub. (8), he or she may not operate the piece of regulated heavy equipment unless he or she is being supervised by another individual who holds a valid heavy equipment operator license issued under sub. (7).

AB928-ASA1,7,2 (c) The licensing requirements under this section apply only to individuals operating cranes or regulated heavy equipment as part of a public works project.

AB928-ASA1,7,5 (3) Exemptions from licensing requirements. (a) An individual is exempt from all of the licensing requirements under subs. (4) to (8) while operating any of the following:

AB928-ASA1,7,8 1. A crane or a piece of heavy equipment if the individual is an employee or is a subcontractor of an exempt entity and the individual is acting within the scope of his or her employment or of the applicable contract.

AB928-ASA1,7,10 2. A crane or a piece of heavy equipment that is being used in the construction, maintenance, or running of an electric substation.

AB928-ASA1,7,13 3. A crane or a piece of heavy equipment that is being used in the construction, maintenance, or running of lighting or signals for railroads, airports, and public thoroughfares.

AB928-ASA1,7,14 4. A piece of heavy equipment used for tunneling horizontally underground.

AB928-ASA1,7,15 5. A piece of heavy equipment used to remove snow.

AB928-ASA1,7,17 5m. A piece of heavy equipment to perform minor service or maintenance work, as defined in s. 66.0903 (1) (dr).

AB928-ASA1,7,18 6. A forklift or telehandler.

AB928-ASA1,7,23 7. A piece of heavy equipment that is being used to erect a sheltered enclosure or to place, at the same time the sheltered enclosure is being erected, private on-site underground utilities or holding tanks to service the enclosed structure. This exemption does not apply to a piece of heavy equipment that is being used for excavation or backfilling for erecting the sheltered enclosure.

AB928-ASA1,7,25 8. A vehicle with a hoisting boom that is used to load, unload, deliver, place, or remove goods or materials at a work site that has a sheltered enclosure.

AB928-ASA1,8,6 9. A piece of heavy equipment that is used for drilling into the earth for a groundwater well that is intended to provide water for human consumption if the individual operating the piece of heavy equipment is a well driller licensed under s. 280.15 (2m), a drilling rig operator registered under s. 280.15 (3g), or an individual supervised, as required under s. 280.15 (3r), by a licensed well driller or drilling rig operator.

AB928-ASA1,8,9 10. A truck with a hoisting boom with a lifting capacity of not more than 10,000 pounds that is used to assist in loading, unloading, delivering, placing, or removing large items that are necessary to service heavy equipment.

AB928-ASA1,8,11 11. An excavator that is used solely as part of the manufacturing process at a permanent manufacturing facility.

AB928-ASA1,8,16 12. A piece of heavy equipment that is being used to deliver and unload concrete road barriers or dividers to a public works site involving roadway construction, repair, or maintenance. This exemption does not apply to a piece of heavy equipment that is being used to load such barriers or dividers or to place or remove such barriers or dividers on or from a roadway.

AB928-ASA1,8,19 (b) An individual is exempt from all of the licensing requirements under subs. (4) to (6) while assembling or disassembling a mobile crane or a tower crane if any of the following apply:

AB928-ASA1,8,20 1. He or she is under the supervision of an individual licensed under sub. (4).

AB928-ASA1,8,23 2. He or she is performing maintenance on the crane that does not require the crane to move and he or she is under the supervision of maintenance personnel who are working at the work site.

AB928-ASA1,9,3 (4) Licensing qualifications; crane operators. The department shall issue a crane operator license to each individual who meets all of the following requirements:

AB928-ASA1,9,4 (a) The individual is at least 18 years old.

AB928-ASA1,9,5 (b) The individual has one of the following:

AB928-ASA1,9,9 1. Successfully completed a recognized apprenticeship program during which, as part of the program, the individual has at least a total of 500 verifiable hours with at least 250 hours in actually operating a crane and not more than 250 hours in crane-related experience.

AB928-ASA1,9,17 1m. At least 1,000 verifiable hours relating to operating a crane in the 5-year period immediately preceding his or her application for the license, with at least 400 hours in actually operating a crane and not more than 600 hours in crane-related experience. Of the hours in crane-related experience, not more than 300 hours may be hours spent in apprentice instruction related to operating cranes. If any of the verifiable hours in crane-related experience is not obtained in the employment of a registered training employer, at least 40 hours must be obtained through apprentice instruction relating to operating cranes.

AB928-ASA1,9,24 2. At least 5,000 verifiable hours related to operating a crane in his or her lifetime, with at least 2,500 hours in actually operating a crane and not more than 2,500 hours in crane-related experience. Of the hours in crane-related experience, not more than 1,250 hours may be hours spent in apprentice instruction related to operating cranes. If any of the verifiable hours in crane-related experience is not obtained in the employment of a registered training employer, at least 40 hours must be obtained through apprentice instruction relating to operating cranes.

AB928-ASA1,9,25 (c) The individual has obtained certification from a program of certification of crane operators that is accredited by the National Commission for Certifying Agencies or from an equivalent accrediting body approved by the department. The certification process shall require passing both a written and practical examination.

AB928-ASA1,10,8 (e) The individual does not have a license, certification, or other permission to operate a crane or heavy equipment issued by the department or by a comparable licensing agency in another jurisdiction that is suspended or revoked at the time of application.

AB928-ASA1,10,14 (5) Endorsement qualifications; tower crane operators. The department shall issue a tower crane operator endorsement to each individual who holds a valid license issued under sub. (4) and who has obtained certification from a program of certification for operating tower cranes that is accredited by the National Commission for Certifying Agencies or from an equivalent accrediting body approved by the department.

AB928-ASA1,10,17 (6) Licensing qualifications; apprentice crane operators. The department shall issue an apprentice crane operator license to each individual who meets all of the following requirements:

AB928-ASA1,10,18 (a) The individual is at least 18 years old.

AB928-ASA1,10,19 (b) The individual is enrolled in a recognized apprenticeship program.

AB928-ASA1,10,23 (c) The individual does not have a license, certification, or other permission to operate a crane or heavy equipment issued by the department or by a comparable licensing agency in another jurisdiction that is suspended or revoked at the time of application.

AB928-ASA1,11,3 (7) Licensing qualifications; heavy equipment operators. The department shall issue a heavy equipment license to each individual who meets all of the following requirements:

AB928-ASA1,11,4 (a) The individual is at least 18 years old.

AB928-ASA1,11,5 (b) The individual has one of the following:

AB928-ASA1,11,6 1. Successfully completed a recognized apprenticeship program.

AB928-ASA1,11,12 1m. At least a total of 1,000 verifiable hours of experience in operating heavy equipment in the 5-year period immediately preceding his or her application for the license, with at least 500 hours in operating regulated heavy equipment and not more than 500 hours in operating unregulated heavy equipment. Of the hours spent in operating unregulated heavy equipment, not more than 250 hours may be hours spent in apprentice instruction related to operating heavy equipment.

AB928-ASA1,11,18 2. At least a total of 5,000 verifiable hours of experience in operating heavy equipment in his or her lifetime, with at least 2,500 hours in operating regulated heavy equipment and no more than 2,500 hours in operating unregulated heavy equipment. Of the hours spent in operating unregulated heavy equipment, not more than 1,250 hours may be hours spent in apprentice instruction related to operating heavy equipment.

AB928-ASA1,11,22 (d) The individual does not have a license, certification, or other permission to operate a crane or heavy equipment issued by the department or by a comparable licensing agency in another jurisdiction that is suspended or revoked at the time of application.

AB928-ASA1,11,25 (8) Licensing qualifications; apprentice heavy equipment operators. The department shall issue an apprentice heavy equipment operator license to each individual who meets all of the following requirements:

AB928-ASA1,11,26 (a) The individual is at least 18 years old.

AB928-ASA1,12,3 (b) The individual is enrolled in a training program on the operation of heavy equipment recognized by the U.S. department of labor.

AB928-ASA1,12,7 (c) The individual does not have a license, certification, or other permission to operate a crane or heavy equipment issued by the department or by a comparable licensing agency in another jurisdiction that is suspended or revoked at the time of application.

AB928-ASA1,12,10 (9) Period of validity; renewals. (a) A license issued under sub. (4) or (7) shall be valid for a period of 5 years. A license issued under sub. (6) or (8) shall be valid for a period of 4 years.

AB928-ASA1,12,12 (b) The department shall renew a crane operator license if all of the following apply:

AB928-ASA1,12,17 1. The holder of the license has at least 1,000 verifiable hours of experience in operating a crane in the 5-year period immediately preceding his or her application for renewal. If more than 500 of these verifiable hours are not obtained in the employment of a registered training employer, at least 40 hours must be obtained through apprentice instruction relating to operating cranes.

AB928-ASA1,12,18 2. The holder's license issued under sub. (4) has not been suspended or revoked.

AB928-ASA1,12,20 3. The holder of the license has not violated any provision under this section, or rules promulgated under this section.

AB928-ASA1,12,22 (c) The department shall renew a heavy equipment operator license if all of the following apply:

AB928-ASA1,13,4 1. The holder of the license has at least 1,000 verifiable hours of experience in operating heavy equipment in the 5-year period immediately preceding his or her application for renewal. Of these verifiable hours, at least 200 hours must be hours spent in operating regulated heavy equipment. If more than 500 of these verifiable hours are not obtained in the employment of a registered training employer, at least 40 hours must be obtained through apprentice instruction relating to operating heavy equipment.

AB928-ASA1,13,5 2. The holder's license issued under sub. (7) has not been suspended or revoked.

AB928-ASA1,13,7 3. The holder of the license has not violated any provision under this section, or rules promulgated under this section.

AB928-ASA1,13,18 (9m) Federal approval. The department shall submit to the federal secretary of labor a plan for the licensing under this section of individuals operating cranes and heavy equipment, if required to do so under 29 USC 667 (b), and shall request the federal secretary of labor to approve the plan. The plan submitted by the department shall be consistent with all of the provisions of this section. If no approval is required under 29 USC 667 (b) or if an approval is granted and in effect, the department shall implement the licensing requirements under this section. If approval is required under 29 USC 667 (b), the department may not implement the licensing requirements under this section unless an approval is granted and in effect. The licensing requirements under this section do not apply if approval of the department's plan is required under 29 USC 667 (b) but is not granted and in effect.

AB928-ASA1,13,20 (10) Rules. (a) The department shall promulgate rules that do all of the following:

AB928-ASA1,13,22 1. Establish criteria for purposes of approving accrediting bodies under sub. (4) (c).

AB928-ASA1,13,23 2. Establish procedures and requirements for verifying hours under sub. (11).

AB928-ASA1,13,25 3. Establish standards for suspending and revoking licenses issued under this section.

AB928-ASA1,14,3 (b) 1. The department shall promulgate a rule that establishes a listing of the types of heavy equipment that are regulated under this section and may amend the rule to add to or remove from the listing types of heavy equipment.

AB928-ASA1,14,5 2. The council may make a recommendation to the department to include in the listing under subd. 1. certain types of heavy equipment.

AB928-ASA1,14,8 (c) The council may make recommendations to the department for rules relating to crane safety standards established by the American Society of Mechanical Engineers or relating to other crane safety standards.

AB928-ASA1,14,10 (d) The council may make recommendations regarding other rules that are promulgated under this section.

AB928-ASA1,14,13 (e) Upon receipt of a recommendation for a rule received from the council under par. (b) 2., (c), or (d) 2. or 3., the department may adopt the recommendation and promulgate a rule that implements the recommendation.

AB928-ASA1,14,16 (f) The council may make recommendations to the department of workforce development regarding the necessary requirements for qualifying as a registered training employer.

AB928-ASA1,14,20 (11) Calculation of verifiable hours. (a) For purposes of subs. (4) (b) 1., 1m., and 2. and (9) (b) 1., any of the following hours shall be counted as verifiable hours of actually operating a crane for meeting requirements for a crane operator license issued under sub. (4) or renewed under sub. (9):

AB928-ASA1,14,21 1. Hours spent working at the controls of a crane.

AB928-ASA1,14,25 2. Hours spent working in direct control of a crane, including hours assembling or disassembling the crane or the crane's boom or boom attachments, extending or retracting the crane's outriggers or stabilizers, leveling the crane, or replacing the hoisting ropes.

AB928-ASA1,15,2 3. Hours spent working directly supervising, instructing, or directing another individual who is carrying out an activity described in subd. 1. or 2.

AB928-ASA1,15,5 (am) For purposes of sub. (4) (b) 1., 1m., and 2., any of the following hours shall be counted as verifiable hours of crane-related experience for meeting requirements for a crane operator license issued under sub. (4):