AB395: Bill Text

5. To the extent consistent with the requirements described in items 1. to 3., districts must be compact. The bill also specifies how compactness is to be measured.

6. In preparing the plan, the LRB must be strictly nonpartisan. No district may be drawn for the purpose of favoring a political party, incumbent legislator or member of Congress, or other person or group or, except to the extent necessary to meet the requirements described in item 1., for the purpose of augmenting or diluting the voting strength of a language or racial minority group. The LRB may not use political affiliations of registered voters, previous election results, or demographic information, except as necessary to test the efficiency gap and competitiveness of each district, or use residence addresses of incumbent legislators or members of Congress. The LRB may also use demographic information as necessary to meet the requirements described in item 1.

7. The number of assembly districts may not be less than 54 nor more than 100. The number of senate districts may not be more than one-third nor less than one-fourth of the number of assembly districts. Each senate district must contain only whole assembly districts and, with certain exceptions, each congressional district may contain only whole senate districts, to the extent possible.

8. Districts must be drawn so that neither the intent nor the result of the plan abridges the equal opportunity of racial or language minorities to participate in the political process.

Redistricting Advisory Commission

The bill assigns several tasks to the Redistricting Advisory Commission, including the following:

1. If requested to do so by the LRB, the commission must provide direction to the LRB concerning any decision the LRB must make in preparing a redistricting plan for which no clearly applicable guideline is provided under the bill.

2. The commission must oversee the work of LRB employees engaged in preparing a redistricting plan and may enter into contracts for hiring experts to assist in plan preparation. Entering into such a contract, or terminating a contract employee, requires approval from three-fourths of the members of the commission.

3. The commission must make available to the public at the earliest feasible time copies of any redistricting bill delivered by the LRB to the legislature, as provided under the bill, maps illustrating the redistricting bill, a summary of the standards applicable to the LRB for development of the plan in the redistricting bill, and a statement of the population of each district created in the plan and the relative deviation of each district population from the ideal district population.

4. The commission must conduct public hearings on a redistricting bill delivered by the LRB to the legislature, as provided under the bill, unless the redistricting bill represents a plan drawn in response to a redistricting bill that was previously delivered to the legislature and rejected by at least one house. The bill also requires the commission to hold a hearing in each of the congressional districts in this state and, whenever it is practicable, on weekends. The commission must submit a report to the legislature summarizing information and testimony received by the commission at the hearings. The report may also include any comments and conclusions that the commission's members deem appropriate concerning the information and testimony received at the hearings or otherwise presented to the commission.

The bill also permits the commission to establish policies limiting the information that the LRB may provide to persons outside of LRB staff concerning any redistricting plan drawn by the LRB, except that any such policy does not apply to population data furnished to the LRB by the U.S. Bureau of the Census or to a redistricting plan after a bill embodying that plan is delivered by the LRB to the legislature as required under the bill. The bill also provides that any draft maps, along with the data sets used to create them, that the LRB produces in the course of preparing a redistricting plan must be open to public inspection and copying and made available on the Internet site of the LRB as soon as they are produced.

Under the bill, the Redistricting Advisory Commission must be created not later than February 15 of the first year following the decennial federal census and terminates upon satisfying its duties, until a new Redistricting Advisory Commission is created for the next round of legislative and congressional redistricting. The commission consists of five members. The speaker and minority leader of the assembly and the majority and minority leaders of the senate must each appoint one person to serve on the commission. Within 30 days after the fourth commission member is appointed, but not later than February 15 of the first year following the decennial federal census, the four commission members so appointed must select the fifth commission member, who serves as chairperson. The bill prohibits all of the following individuals from being commission members: individuals who are not eligible electors of this state at the time of the appointment, individuals who hold partisan public office or political party office, and individuals who are a relative of or are employed by a member of the legislature or of Congress or are employed directly by the legislature or Congress.

Redistricting process

The bill requires the LRB to perform certain tasks in preparation for drawing congressional and legislative redistricting plans on the basis of each federal decennial census. For example, as soon as possible after receiving from the U.S. Bureau of the Census the population data needed for legislative redistricting, the LRB must use that data to assign a population figure to geographic or political units to facilitate the drawing of redistricting plans. Typically, this data is available on or about April 1 of the first year following the decennial federal census. The LRB must also prepare and publish an analysis describing the population of current legislative and congressional districts and the extent to which the districts may violate the redistricting standards described above. In addition, as municipalities complete their ward plans (typically, by October of the first year following the decennial federal census), the LRB must assign a population figure based upon certified federal census data to each municipal ward, for use in drawing redistricting plans.

Not later than January 1 of the second year following the decennial federal census, the LRB must deliver to the majority leader of the senate and speaker of the assembly identical bills embodying a plan of legislative and congressional redistricting, drawn in accordance with the standards described above. The bill further specifies a procedure that the legislature must follow in considering the bills, although that procedure is not enforceable by the courts. The bill requires either the assembly or the senate to bring the bill to a vote expeditiously, but not less than seven days after the report of the Redistricting Advisory Commission is received and made available to the members of the legislature. The vote must be under a procedure or rule permitting no amendments. If the bill is approved by the first house in which it is considered, the bill must expeditiously be brought to a vote in the second house under a similar procedure or rule.

If neither of the bills delivered by the LRB is approved by both the assembly and the senate, the chief clerk of the house that failed to approve the bill must transmit to the LRB information that the house may direct regarding reasons why the plan was not approved. The LRB must then prepare identical bills embodying a second plan of legislative and congressional redistricting, taking into account the reasons transmitted to the LRB, insofar as it is possible to do so while complying with the standards described above. The LRB must deliver the bill to the majority leader of the senate and the speaker of the assembly no later than 21 days after the date of the vote by which the senate or the assembly failed to approve the bill initially submitted. This second bill must be expeditiously introduced and brought to a vote not less than seven days after the date of introduction, in the same manner as prescribed for the initial bill.

If the second bill is similarly rejected by at least one house, the same procedure applies, except that the third bill is subject to amendment in the same manner as other bills. In addition, the third bill and any amendments to it may be passed only with the approval of three-fourths of all the members elected in each house.

The bill also provides exceptions to this process to account for variations in the timing of the release of federal census data.

In addition, the bill prohibits the majority leader of the senate, the minority leader of the senate, the speaker of the assembly, or the minority leader of the assembly from assigning or hiring any person to work with the LRB to prepare for redistricting, to prepare plans, or to oversee either process.

Required contents of redistricting bills

The LRB must ensure that each bill embodying a redistricting plan it draws contains specified conventions to apply wherever territory in a plan is described by geographic boundaries. Also, each such bill must provide that the bill first applies, with respect to regular elections, to offices filled at the next occurring general election and, with respect to special or recall elections, to offices filled or contested on or after the date of the next occurring general election.

Challenge based on population inequality

If an action is brought challenging a legislative redistricting plan adopted under the procedure established in the bill on the basis of an excessive population variance among senate or assembly districts, the legislature has the burden of justifying any variance in excess of 10 percent between the population of a senate or assembly district and the applicable ideal district population. If an action is brought challenging a congressional redistricting plan adopted under the procedure established in the bill on the basis of an excessive population variance among congressional districts, the legislature has the burden of justifying any variance in excess of 1 percent between the population of a congressional district and the applicable ideal district population.

For further information see the state fiscal estimate, which will be printed as an appendix to this bill.

The people of the state of Wisconsin, represented in senate and assembly, do enact as follows:

AB395,1 Section 1 . 3.002 (intro.) and (1m) of the statutes are consolidated, renumbered 3.002 and amended to read:

AB395,6,4 3.002 Description of territory. In this chapter: (1m) Reference, reference to any county or municipality means that county or municipality as its boundaries exist on April 1 of the year of the federal decennial census on which the districting plan described under subch. II is based.

AB395,2 Section 2. 3.002 (2) of the statutes is repealed.

AB395,3 Section 3 . 3.004 (2) of the statutes is amended to read:

AB395,6,11 3.004 (2) “Ward" means a ward prescribed by a municipality based upon municipal boundaries in effect on April 1 of the year of the federal decennial census in accordance with the most recent revision of municipal wards under s. 5.15 upon which the districting plan described under subch. II is based and used in preparing congressional and legislative redistricting plans as required under s. 4.005.

AB395,4 Section 4. Subchapter I of chapter 4 [precedes 4.001] of the statutes is repealed and recreated to read:

AB395,6,14 CHAPTER 4

AB395,6,15 subchapter i

AB395,6,17 general provisions and redistricting

AB395,6,18 4.001 Definitions. In this chapter, unless the context requires otherwise:

AB395,6,19 (1) “Block" has the meaning given in s. 5.02 (1q).

AB395,6,21 (2) “Commission" means the redistricting advisory commission established under s. 13.49.

AB395,6,23 (3) “Plan" means a plan for legislative and congressional reapportionment prepared under this subchapter.

AB395,6,25 (4) “Political subdivision" means a city, town, village, or county within this state.

AB395,7,1 (5) “Section 2 of the Voting Rights Act" means 52 USC 10301.

AB395,7,4 (6) “Ward" means a municipal ward in effect on April 1 of the year of the federal decennial census and used in preparing congressional and legislative redistricting plans as required under s. 4.005.

AB395,7,7 4.002 Political subdivision boundaries. In this chapter, reference to any political subdivision means that political subdivision as its boundaries exist on April 1 of the year of the federal decennial census.

AB395,7,11 4.003 Legislative districts established. This state is divided into 33 senate districts, each composed of 3 assembly districts. Each senate district may elect one member of the senate. Each assembly district may elect one representative to the assembly.

AB395,7,15 4.004 Preparations for redistricting. (1) The legislative reference bureau shall acquire appropriate information, review and evaluate available facilities, and develop programs and procedures in preparation for drawing congressional and legislative redistricting plans on the basis of each federal decennial census.

AB395,7,20 (2) By December 1 of the year of the decennial federal census, the legislative reference bureau shall obtain from the U.S. bureau of the census information regarding geographic and political units in this state for which federal census population data has been gathered and will be tabulated. The legislative reference bureau shall use the information to do all of the following:

AB395,7,23 (a) Prepare necessary descriptions of geographic and political units for which census data will be reported and that are suitable for use as components of legislative districts.

AB395,8,3 (b) Prepare maps of geographic and political units within the state that may be used to illustrate the locations of district boundaries proposed in plans prepared in accordance with s. 4.007.

AB395,8,13 (3) As soon as possible after receiving from the U.S. bureau of the census the population data needed for legislative redistricting that the U.S. bureau of the census is required to provide this state under P.L. 94-171, the legislative reference bureau shall use that data to assign a population figure based upon certified federal census data to each geographic or political unit described under sub. (2) (b). The legislative reference bureau shall prepare and publish an analysis describing the population of current legislative and congressional districts and the extent to which the districts may violate the standards under s. 4.007. Upon satisfying these requirements, the legislative reference bureau shall begin the preparation of congressional and legislative redistricting plans as required under s. 4.006.

AB395,8,17 (4) None of the 4 selecting authorities, as defined in s. 13.49 (1) (b), may assign or hire any person to work with the legislative reference bureau to prepare for redistricting under this section, to prepare plans under s. 4.006, or to oversee either process.

AB395,8,24 4.005 Use of municipal ward plans. After receipt of a division ordinance or resolution under s. 5.15 (4) (b), the legislative reference bureau shall use the data obtained from the U.S. bureau of the census under s. 4.004 (3) to assign a population figure based upon certified federal census data to each ward established in the division ordinance or resolution. The legislative reference bureau shall use each ward to which a population figure is assigned in preparing congressional and legislative redistricting plans as required under s. 4.006.

AB395,9,10 4.006 Preparation of redistricting plans. (1) Not later than January 1 of the 2nd year following the decennial federal census, the legislative reference bureau shall deliver to the majority leader of the senate and the speaker of the assembly identical bills creating plans of legislative and congressional redistricting, prepared in accordance with s. 4.007. Either the assembly or the senate shall bring the bill to a vote expeditiously, but not less than 7 days after the commission report under s. 13.49 (3) (d) 2. is received and made available to the members of the legislature. The vote shall be under a procedure or rule permitting no amendments. If the bill is approved by the first house in which it is considered, the bill shall expeditiously be brought to a vote in the 2nd house under a similar procedure or rule.

AB395,9,25 (2) If neither of the bills delivered by the legislative reference bureau under sub. (1) is approved by both the assembly and the senate, the chief clerk of the house that failed to approve the bill shall immediately transmit to the legislative reference bureau information that the house may direct regarding reasons why the plan was not approved. The legislative reference bureau shall prepare identical bills embodying a 2nd plan of legislative and congressional redistricting prepared in accordance with s. 4.007, taking into account the reasons transmitted to the legislative reference bureau under this subsection insofar as it is possible to do so within the requirements of s. 4.007. The legislative reference bureau shall deliver the bills to the majority leader of the senate and the speaker of the assembly no later than 21 days after the date of the vote by which the senate or the assembly failed to approve the bill submitted under sub. (1). Any bill delivered by the legislative reference bureau under this subsection shall be expeditiously introduced and brought to a vote not less than 7 days after the date of introduction, in the same manner as prescribed for the bill required under sub. (1).

AB395,10,12 (3) If neither of the bills delivered by the legislative reference bureau under sub. (2) is approved by both the assembly and the senate, the same procedure as prescribed by sub. (2) shall be followed. If a 3rd plan is required under this subsection, the legislative reference bureau shall deliver the bills to the majority leader of the senate and the speaker of the assembly no later than 21 days after the date of the vote by which the senate or the assembly failed to approve the bill submitted under sub. (2). Any bill delivered by the legislative reference bureau under this subsection shall be expeditiously introduced and brought to a vote not less than 7 days after the date of introduction and shall be subject to amendment in the same manner as other bills. Any bill delivered under this subsection, and any amendment to such a bill, may be passed only with the approval of three-fourths of all the members elected in each house.

AB395,10,13 (4) Notwithstanding subs. (1) to (3):

AB395,10,23 (a) If certified federal census data that is sufficient to permit preparation of a congressional redistricting plan becomes available at an earlier time than the population data needed to permit preparation of a legislative redistricting plan in accordance with s. 4.007, the legislative reference bureau shall so inform the majority leader of the senate and the speaker of the assembly. If the majority leader of the senate and the speaker of the assembly jointly direct, the legislative reference bureau shall prepare a separate bill establishing congressional districts and deliver it separately from the bill establishing legislative districts. The legislature shall proceed to consider the congressional redistricting bill in substantially the manner prescribed by subs. (1) to (3).

AB395,11,8 (b) If the population data for legislative redistricting that the U.S. bureau of the census is required to provide this state under P.L. 94-171 and, if used by the legislative reference bureau, the corresponding topologically integrated geographic encoding and referencing data file for that population data are not available to the legislative reference bureau on or before April 1 of the first year following the decennial federal census, the deadlines set forth in this section shall be extended by a number of days equal to the number of days after April 1 of the first year following the decennial federal census that the population data and the topologically integrated geographic encoding and referencing data file for legislative redistricting become available.

AB395,11,12 4.007 Redistricting standards. (1) Legislative and congressional districts shall be established on the basis of population requirements imposed under the Wisconsin Constitution and the U.S. Constitution and requirements imposed under Section 2 of the Voting Rights Act.

AB395,11,24 (2) Senate and assembly districts, respectively, shall satisfy the population standards established in this subsection. The quotient, obtained by dividing the sum of the absolute values of the deviations of all district populations from the applicable ideal district population by the number of districts established, may not exceed 1 percent of the applicable ideal district population, unless necessary to maintain compliance with Section 2 of the Voting Rights Act. For purposes of this subsection, the ideal district population is determined by dividing the population of the state reported in the most recent federal decennial census by the number of districts to be established. No senate district may have a population that exceeds that of any other senate district by more than 10 percent and no assembly district may have a population that exceeds that of any other assembly district by more than 10 percent, unless necessary to maintain compliance with Section 2 of the Voting Rights Act.

AB395,12,6 (3) Congressional districts shall each have a population as nearly equal as practicable to the ideal district population, derived as prescribed in sub. (2), while maintaining compliance with Section 2 of the Voting Rights Act. No congressional district may have a population that varies by more than 1 percent from the applicable ideal district population, unless necessary to comply with Section 2 of the Voting Rights Act.

AB395,12,14 (4) District boundaries shall coincide with ward boundaries and, to the extent consistent with sub. (1), shall coincide with the boundaries of political subdivisions. The number of political subdivisions divided among more than one district shall be as small as possible. When there is a choice among political subdivisions to divide, the more populous political subdivisions shall be divided before the less populous, except that this requirement does not apply to a legislative district boundary drawn along a county boundary which passes through a city with territory in more than one county.

AB395,12,16 (5) Districts shall be composed of convenient contiguous territory. Areas which meet only at the points of adjoining corners are not contiguous.

AB395,12,20 (6) Districts shall not be drawn with the intent or result of denying or abridging the equal opportunity of racial or language minorities to participate in the political process or diminishing their ability to elect representatives of their choice, whether by themselves or by voting in concert with other persons.

AB395,12,21 (7) (a) In this subsection:

AB395,13,5 1. “Geographic unit center" means that point within a population data unit approximately equidistant from the northern and southern extremities and also approximately equidistant from the eastern and western extremities of the population data unit. This point shall be determined by visual observation of a map of the population data unit, unless it is otherwise determined within the context of an appropriate coordinate system developed by the federal government or another source that the legislative reference bureau determines is qualified and objective and is obtained for use in this state with prior approval of the joint committee on legislative organization.

AB395,13,9 2. “Population data unit" means a ward, census enumeration district, block, or other unit of territory having clearly identified geographic boundaries and for which a total population figure is included in or can be derived directly from certified federal census data.

AB395,13,15 3. “X-coordinate" means the relative location of a point along the east–west axis of the state. Unless otherwise measured within the context of an appropriate coordinate system obtained for use as permitted by subd. 1., the x-coordinate shall be measured along a line drawn due east from a due north and south line running through the point which is the western extremity of this state, to the point to be located.

AB395,13,21 4. “Y-coordinate" means the relative location of a point along the north–south axis of the state. Unless otherwise measured within the context of an appropriate coordinate system obtained for use as permitted by subd. 1., the y-coordinate shall be measured along a line drawn due south from a due east and west line running through the point which is the northern extremity of this state, to the point to be located.

AB395,14,3 (b) To the extent consistent with subs. (1) to (3), districts shall be compact in form. Compact districts are those which are square, rectangular, or hexagonal in shape to the extent permitted by natural or political boundaries. When it is necessary to compare the relative compactness of 2 or more districts, or of 2 or more alternative redistricting plans, the tests prescribed by pars. (c) and (d) shall be used. Should the results of these 2 tests be contradictory, the standard under par. (c) shall be given greater weight than the standard under par. (d).

AB395,14,6 (c) 1. The compactness of a district is greatest when the length of the district and the width of the district are equal. The measure of a district's compactness is the absolute value of the difference between the length and the width of the district.

AB395,14,11 2. In measuring the compactness of a district by means of electronic data processing, the difference between the x-coordinates of the easternmost and the westernmost geographic unit centers included in the district shall be compared to the difference between the y-coordinates of the northernmost and southernmost geographic unit centers included in the district.

AB395,14,25 3. To determine the length and width of a district by manual measurement, the distance from the northernmost point or portion of the boundary of a district to the southernmost point or portion of the boundary of the same district and the distance from the westernmost point or portion of the boundary of the district to the easternmost point or portion of the boundary of the same district shall each be measured. If the northernmost or southernmost portion of the boundary, or each of these points, is a part of the boundary running due east and west, the line used to make the measurement required by this subdivision shall be drawn either due north and south or as nearly so as the configuration of the district permits. If the easternmost or westernmost portion of the boundary, or each of these points, is a part of the boundary running due north and south, a similar procedure shall be followed. The lines to be measured for the purpose of this subdivision shall each be drawn as required by this subdivision, even if some part of either or both lines lies outside the boundaries of the district that is being tested for compactness.

AB395,15,6 4. The absolute values computed for individual districts under this paragraph may be cumulated for all districts in a plan in order to compare the overall compactness of 2 or more alternative redistricting plans for the state or for a portion of the state. However, it is not valid to cumulate or compare absolute values computed using the measurements under subd. 2. with those computed using the measurements under subd. 3.

AB395,15,9 (d) 1. The compactness of a district is greatest when the ratio of the dispersion of population about the population center of the district to the dispersion of population about the geographic center of the district is one to one.

AB395,15,20 2. The population dispersion about the population center of a district or about the geographic center of a district is computed as the sum of the products of the population of each population data unit included in the district multiplied by the square of the distance from the geographic unit center of that population data unit to the population center or the geographic center of the district, as the case may be. The geographic center of the district is defined by averaging the locations of all geographic unit centers which are included in the district. The population center of the district is defined by computing the population–weighted average of the x-coordinates and y-coordinates of each geographic unit center assigned to the district, it being assumed for the purpose of this calculation that each population data unit possesses uniform density of population.

AB395,15,23 3. The ratios computed for individual districts under this paragraph may be averaged for all districts in a plan in order to compare the overall compactness of 2 or more alternative redistricting plans for the state or for a portion of the state.

AB395,16,5 (8) In preparing any redistricting plan, the legislative reference bureau shall be strictly nonpartisan. No district may be drawn for the purpose of favoring a political party, incumbent legislator or member of Congress, or other person or group or, except to the extent required under sub. (1), for the purpose of augmenting or diluting the voting strength of a language or racial minority group. Except as provided in sub. (10), in establishing districts, no use shall be made of any of the following data:

AB395,16,6 (a) The residence addresses of incumbent legislators or members of Congress.

AB395,16,7 (b) Political affiliations of registered voters.

AB395,16,8 (c) Previous election results.

AB395,16,10 (d) Demographic information except as necessary to meet the requirements of subs. (1) and (10).

AB395,16,19 (9) The number of assembly districts in any redistricting plan may not be less than 54 nor more than 100. The number of senate districts in any redistricting plan may not be more than one-third nor less than one-fourth of the number of assembly districts. Each senate district shall contain only whole assembly districts. Except as otherwise provided in this subsection, to the extent possible, each congressional district shall contain only whole senate districts. The other standards specified in this section shall take precedence where a conflict arises between those standards and the requirement of including only whole senate districts within a congressional district.

AB395,16,25 (10) In preparing any redistricting plan, the legislative reference bureau shall test the efficiency gap and competitiveness of each district and make the test results available to the public, including publishing the results on its Internet site, no later than 72 hours prior to the first public hearing on the proposed plan. The legislative reference bureau may use the data described under sub. (8) (b) to (d) to perform the tests under this subsection.

AB395,17,2 4.008 Required provisions in redistricting bills. Each bill delivered under s. 4.006 shall provide all of the following:

AB395,17,4 (1) That, wherever territory is described in the bill by geographic boundaries, the following conventions are used:

AB395,17,6 (a) Each bound continues to the intersection with the bound next named, or to the intersection with a straight-line extension of such bound.

AB395,17,8 (b) If the bound is a street, it follows the center line of the street or the center line of the street extended.

AB395,17,10 (c) If the bound is a railroad right-of-way, it follows the center line of the railroad right-of-way.