A-E 5.03(2) (2)Areas of experience. The experience of an applicant for a permit shall be substantially in the field or subfield for which the applicant has applied , and the experience shall demonstrate competence to be in charge of work in that specific field or subfield to the satisfaction of the section. Fields and subfields are described in s. A-E 5.06. The experience shall be in areas of design practice designated under subs. (3) and (4), or other areas which, to the satisfaction of the section, provides the applicant with knowledge or practice at least equivalent to what is generally acquired by experience in the areas listed. An applicant need not have experience in all areas of practice listed under sub. (4). However, all applicants shall have experience in those areas listed in sub. (3). Academic coursework that provides the applicant with knowledge and skills in some of the areas of practice listed under subs. (3) and (4) may be claimed as equivalent to experience , in accordance with the limitations in s. 443.07 (2), Stats.
A-E 5.03(3) (3)Required areas of experience. All applicants shall have experience in the following areas:
A-E 5.03(3)(a) (a) Research and development.
A-E 5.03(3)(a)1.1. Problem identification, including consideration of alternative approaches to problem solving.
A-E 5.03(3)(a)2. 2. Planning, including selecting a theoretical or experimental approach.
A-E 5.03(3)(a)3. 3. Execution of plan, including completing design calculations.
A-E 5.03(3)(a)4. 4. Interpreting and reporting results.
A-E 5.03(3)(b) (b) Design.
A-E 5.03(3)(b)1.1. Definition of safety, health and environmental constraints.
A-E 5.03(3)(b)2. 2. Selection of materials and components.
A-E 5.03(3)(b)3. 3. Production of final designs.
A-E 5.03(3)(b)4. 4. Preparation of detailed working drawings.
A-E 5.03(3)(b)5. 5. Evaluation of design solution for adherence to laws and codes and obtain approval.
A-E 5.03(4) (4)Other areas of experience. Qualifying experience includes:
A-E 5.03(4)(a) (a) Other design.
A-E 5.03(4)(a)1.1. Identification of design objectives.
A-E 5.03(4)(a)2. 2. Definition of performance specifications and functional requirements, including materials, energy balances, and environmental considerations.
A-E 5.03(4)(a)3. 3. Formulation of conceptual design specifications.
A-E 5.03(4)(a)4. 4. Definition of physical properties of all key materials.
A-E 5.03(4)(a)5. 5. Preparation of designs, layouts, models and systems diagrams.
A-E 5.03(4)(a)6. 6. Preparation of supporting technical information.
A-E 5.03(4)(a)7. 7. Preparation of bid documents, including conducting a contract evaluation.
A-E 5.03(4)(a)8. 8. Preparation of specifications and data sheets.
A-E 5.03(4)(a)9. 9. Interaction with engineers from other areas of work.
A-E 5.03(4)(a)10. 10. Consultation with contractors, suppliers and installers.
A-E 5.03(4)(a)11. 11. Inspection of purchased equipment and materials for conformity specifications.
A-E 5.03(4)(b) (b) Construction.
A-E 5.03(4)(b)1.1. Assistance in design implementation during manufacturing or construction.
A-E 5.03(4)(b)2. 2. Assistance in design implementation during start up.
A-E 5.03(4)(b)3. 3. Revision of design as required including “as built" drawings and specifications.
A-E 5.03(4)(b)4. 4. Certification in completing and testing.
A-E 5.03(4)(b)5. 5. Provision of field service assistance.
A-E 5.03(4)(b)6. 6. Reviewing of completed work.
A-E 5.03(4)(c) (c) Maintenance.
A-E 5.03(4)(c)1.1. Development of preventive maintenance schedules.
A-E 5.03(4)(c)2. 2. Recording of failures, repairs and replacement of equipment.
A-E 5.03(4)(c)3. 3. Determination of causes of equipment, structure or schedule failures.
A-E 5.03(5) (5)Experience limitation. Not more than one year of satisfactory experience may be granted for any calendar year.
A-E 5.03 History History: Cr. Register, February, 1987, No. 374, eff. 3-1-87; am. (2), Register, October, 1991, No. 430, eff. 11-1-91; am. (1) (intro.) to (c), Register, January, 1999, No. 517, eff. 2-1-99; CR 20-014: cr. (1) (e), am. (2) Register May 2021 No. 785, eff. 6-1-21.
A-E 5.04 A-E 5.04 Examination.
A-E 5.04(1)(1)Written examination for designer of engineering systems; scope of examination.
A-E 5.04(1)(a)(a) The written examination in each field and subfield shall include questions and problems applying to the following basic content areas:
A-E 5.04(1)(a)1. 1. Basic mathematics, physics and mechanics.
A-E 5.04(1)(a)2. 2. Materials and structures.
A-E 5.04(1)(a)3. 3. Graphic techniques, including drafting and sketching, reading and interpreting blueprints and preparing specifications.
A-E 5.04(1)(a)4. 4. Administrative code and other relevant Wisconsin laws.
A-E 5.04(1)(b) (b) The examination for a permit in the field of heating, ventilating and air conditioning systems requires an applicant to demonstrate competency in all of the following:
A-E 5.04(1)(b)1. 1. User requirements for maintenance of temperature.
A-E 5.04(1)(b)2. 2. Humidity and ventilation systems.
A-E 5.04(1)(b)3. 3. Energy sources.
A-E 5.04(1)(b)4. 4. Heating, ventilating and air conditioning systems, including ducted, piped, unitary, steam and hot water systems.
A-E 5.04(1)(b)5. 5. Manual, electric and pneumatic control systems, including air distribution, heat transfer, energy conservation and air changing systems.
A-E 5.04(1)(c) (c) The examination for a permit in the field of plumbing systems requires an applicant to demonstrate competency in all of the following:
A-E 5.04(1)(c)1. 1. User requirements for water supply, drainage and disposal, including private septic systems.
A-E 5.04(1)(c)2. 2. Gaseous distribution systems, including processing piping, oxygen, air and other gases, heating and utilities.
A-E 5.04(1)(d) (d) The examination for a permit in the subfield of private onsite wastewater treatment systems as defined in s. 145.01 (12), Stats., requires an applicant to demonstrate competency in:
A-E 5.04(1)(d)1. 1. Knowledge of soils.
A-E 5.04(1)(d)2. 2. Design of private onsite wastewater treatment systems.
A-E 5.04(1)(d)3. 3. Applicable administrative code and statutory provisions.
A-E 5.04(1)(d)4. 4. Knowledge of applications and reports, including but not limited to soil boring and percolation reports.
A-E 5.04(1)(d)5. 5. Mapping skills and interpretation.
A-E 5.04(1)(d)6. 6. Knowledge of all systems in the subfield and design of the systems.
A-E 5.04(1)(d)7. 7. Environmental issues.
A-E 5.04(1)(e) (e) The examination for a permit in the field of electrical systems requires the applicant to demonstrate competency in all of the following:
A-E 5.04(1)(e)1. 1. User requirements for both primary and secondary distribution, illumination, controls and switches and communication systems.
A-E 5.04(1)(e)2. 2. Power, including resistance heating, signals and motors.
A-E 5.04(1)(f) (f) The examination for a permit in the field of fire protection systems requires the applicant to demonstrate competency in all of the following:
A-E 5.04(1)(f)1. 1. User requirements for fire protection of life and property, life safety requirements, methods of fire prevention, wet and dry standpipes, use of fire retardants and fire proof materials.
A-E 5.04(1)(f)2. 2. Suppression.
A-E 5.04(1)(f)3. 3. Fire characteristics.
A-E 5.04(1)(f)4. 4. Smoke.
A-E 5.04(1)(f)5. 5. Gases.
A-E 5.04(2) (2)Requirements for entrance to examinations. To be eligible to take a written examination for a permit as a designer of engineering systems, an applicant shall have 7 years of approved experience in specialized engineering design work, up to 4 years of which may be equivalent academic training or apprenticeship as provided in s. 443.07 (2), Stats.
A-E 5.04(3) (3)Application for examination. An application for examination must be filed with the section no later than 2 months before the scheduled date for the examination.
A-E 5.04 Note Note: An otherwise qualified applicant with a disability shall be provided with reasonable accommodations.
A-E 5.04(4) (4)Examination and refund fees. The fee for a designer examination and requirements for refund of fees are specified in s. 440.05, Stats., and ch. SPS 4.
A-E 5.04(5) (5)Time, date and site of examinations. The examinations shall be held at a time, date and site specified by the section.
A-E 5.04(6) (6)Grading of written examinations. The passing scores set by the section represent the minimum competency required to protect public health and safety. An applicant's experience rating is not considered by the section in grading the applicant's written examination.
A-E 5.04(7) (7)Reexamination procedure. An applicant for a designer examination who fails an examination or any part of an examination may retake any part of the examination failed at a regularly-scheduled administration of the examination. If an applicant fails to pass, on reexamination of the parts failed, or, the current examination parts equivalent to the parts failed, within 4 years from the date of receipt of the results of the first failure of the examination or any part of the examination, the applicant is required to take and pass the entire examination. If the applicant retakes the entire examination, the applicant shall pay the original examination fee under s. 440.05 (1), Stats. The section shall determine which parts of a current examination are equivalent to the examination parts failed by an applicant.
A-E 5.04 Note Note: Examination fees are available on the department's website at dsps.wi.gov, or by request to the Department of Safety and Professional Services, P.O. Box 8935, Madison, WI 53708, or call (608) 266-2112.
A-E 5.04(8) (8)Examination review.
A-E 5.04(8)(a) (a) One-year limitation. An applicant for a designer examination may review questions on any part of an examination failed by the applicant within one year from the date of the examination. An applicant may review the examination only once.
A-E 5.04(8)(b) (b) Review procedure. Failing candidates shall be notified of the procedure to schedule a review of the appropriate examination parts. The applicant may take notes on the examination questions reviewed. No notes may be retained by the applicant following the review. The review may not take place within 30 days prior to a scheduled examination. If the section confirms the failing status following its review, the application shall be deemed incomplete, and the applicant may be reexamined under sub. (7).
A-E 5.04(9) (9)Cheating. Any applicant for registration who receives aid or cheats in any other manner in connection with the examination shall be barred from completing the examination or shall not be given a passing grade, or both.
A-E 5.04 History History: Cr. Register, February, 1987, No. 374, eff. 3-1-87; am. (1) (a) (intro.), renum. (1) (d) and (e) to be (1) (e) and (f), cr. (1) (d), Register, October, 1991, No. 430, eff. 11-1-91; am. (7), Register, June, 1994, No. 462, eff. 7-1-94; am. (8) (b), Register, March, 1996, No. 483, eff. 4-1-96; am. (8), Register, October, 1996, No. 490, eff. 11-1-96; am. (1) (a) 1. to 3., (b) (intro.) to 4., (c) (intro.) and 1., (e) (intro.) and 1., (f) (intro.) to 4. and (6), cr. (9), Register, January, 1999, No. 517, eff. 2-1-99; correction in (4) made under s. 13.92 (4) (b) 7., Stats., Register November 2011 No. 671; CR 20-014: am. (1) (d) (intro.), 1. to 6., (3), (5), (6), (7), (8) (a) Register May 2021 No. 785, eff. 6-1-21.
A-E 5.05 A-E 5.05 Application contents. Except as provided in s. A-E 2.06 (2), an application shall include all of the following:
A-E 5.05(1) (1)Transcripts or apprenticeship records verifying the applicant's education and training.
A-E 5.05(2) (2)References from 3 individuals who have personal knowledge of the applicant's work involving the preparation of plans and specifications, one of whom shall be a registered architect, professional engineer or designer.
A-E 5.05(3) (3)A chronological history of the applicant's employment.
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.