Register July 2021 No 787
Chapter NR 214
LAND TREATMENT OF INDUSTRIAL LIQUID WASTES,
BY-PRODUCT SOLIDS AND SLUDGES
Subchapter I — General
Exemptions from requirements of this chapter.
Exemptions from groundwater standards.
Sampling and analytical methods.
Subchapter II — Requirements for Specific Land Treatment Systems
Absorption pond systems.
Ridge and furrow systems.
Spray irrigation systems.
Overland flow systems.
Subsurface absorption systems.
Landspreading systems for liquid wastes and by-product solids.
Sludge spreading systems.
Subchapter III — Site Investigation and Monitoring
Soil investigation requirements.
Groundwater monitoring requirements.
Ch. NR 214 Note
Note: Chapter NR 214 as it existed on June 30, 1990 was repealed and a new ch. NR 214 was created effective July 1, 1990.
NR 214.01 Purpose.
The purpose of this chapter is to protect public health and welfare by restoring, maintaining and protecting the physical, chemical and biological integrity of the groundwater and all uses of state waters in accordance with ch. NR 140
, and chs. 160
, Stats.; to establish design and construction criteria for all land treatment systems that receive industrial wastes and require department approval of plans and specifications under ch. NR 108
and s. 281.41
, Stats.; and to establish discharge limitations, monitoring requirements and operating standards for all industrial land treatment systems which require a permit under ch. 283
, Stats. Under s. 283.31
, Stats., a permit is required for the lawful discharge of any pollutant into the waters of the state, which include groundwater by the definition in s. 283.01 (20)
NR 214.01 History
Cr. Register, June, 1990, No. 414
, eff. 7-1-90; correction made under s. 13.92 (4) (b) 7.
, Stats., Register December 2014 No. 708
This chapter applies to those discharges of industrial wastes to land treatment systems not regulated under ch. NR 518
. This includes but is not limited to liquid wastes, by-product solids and sludges generated by: fruit and vegetable processing, dairy products processing, meat, fish and poultry products processing, mink raising operations, aquaculture, commercial laundromat and motor vehicle cleaning operations and any other industrial, commercial or agricultural operation which results in a point source discharge that has no detrimental effects on the soils, vegetation or groundwater of a land treatment system. Industrial by-product solids and sludges shall also have beneficial properties as a soil conditioner or fertilizer. Lime sludges containing radium may be regulated under this chapter.
The generator of these wastes shall be responsible for their handling and land application, except when an independent land application contractor has been issued a WPDES permit for the land treatment of these wastes. When the contractor is issued the WPDES permit, the independent contractor shall be responsible for the handling and application of these wastes to the land. A person may not land apply industrial waste or discharge industrial waste to a land treatment system unless the land application or discharge is authorized by a WPDES permit.
The provisions of this chapter are not applicable to the following wastes:
Animal waste regulated under ch. NR 243
, and liquid manure applied in accordance with sound agricultural practices.
Mining wastes backfilled or otherwise disposed of in a prospecting excavation or a mine in accordance with a permit issued under ch. NR 131
, or under subch. III of ch. 295
, Stats., except runoff, leachate, decantate, or other wastewater collected for disposal on land outside of the permitted prospecting or mining site.
Liquid wastes from sweet corn silage stacks which are utilized for direct livestock feeding, have less than 150 tons present on a site at any one time, and are located such that surface water and groundwater pollution does not occur.
Sludge from publicly or privately owned wastewater treatment works regulated under ch. NR 204
Sludges which are disposed of in a landfill, a land disposal site or an incinerator licensed and operated in accordance with chs. NR 500
Uncontaminated lime sludges which are generated by pulp or paper mills or water supply treatment facilities and are exempted from regulation under s. NR 518.04 (3)
Wet and semi-liquid wastes disposed of in a site regulated under ch. NR 500
, except runoff, leachate, decantate or other wastewaters collected for disposal on land outside of the regulated disposal site.
Wastes from sites and facilities used solely for research purposes under the direction of a Wisconsin registered professional engineer or a scientist employed by a university located within this state provided the following requirements are met:
The net site area, excluding site borders and buffer strips, does not exceed 4 acres;
The available nitrogen, chloride and heavy metal additions averaged over the total plot area may not exceed the rates specified by the department in ch. NR 204
for municipal sewage sludges or those identified in the literature as being toxic to specific plants or plant groups;
The site is developed, operated, monitored and maintained in a safe, nuisance free manner; and
Copies of the research proposal are submitted to the department in advance of initiation of the research and any reports and publications on the research are provided to the department.
NR 214.02 History
Cr. Register, June, 1990, No. 414
, eff. 7-1-90; CR 09-123
: am. (2) Register July 2010 No. 655
, eff. 8-1-10; CR 13-057
: am. (3) (f) Register July 2015 No. 715
, eff. 8-1-15.
NR 214.03 Definitions.
The following definitions are applicable to terms used in this chapter. Definitions of other terms and meanings of abbreviations are in ch. NR 205
“Alternate concentration limit" means the concentration of a substance in groundwater established for a site by the department to replace a preventive action limit or an enforcement standard, or both from s. NR 140.10
, when an exemption is granted in accordance with s. NR 140.28
“ASTM" means the American Society for Testing and Materials. Copies of ASTM standards referenced in this chapter are available for inspection at the offices of the department of natural resources, the secretary of state's office and the legislative reference bureau. ASTM standards may be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.
“Bedrock" means rock that is exposed at the earth's surface or underlies soil material and is encountered when weathered in-place consolidated material, larger than 2 mm in size, is greater than 50% by volume.
“By-product solids" means waste materials from the animal product or food processing industry including, but not limited to: remains of butchered animals, paunch manure and vegetable waste materials such as leaves, cuttings, peelings and actively fermenting sweet corn silage.
“Cation-exchange capacity" means the sum total of exchangeable cations that a soil can absorb, expressed in milliequivalents per 100 grams of oven dry soil.