NR 254.122 Note
(2) Within the range of 6.0 to 9.0
NR 254.122 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.123
NR 254.123 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in
40 CFR 125.30 to
125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of BAT:
-
See PDF for table 
NR 254.123 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
-
See PDF for table NR 254.123 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
-
See PDF for table NR 254.123 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
NR 254.123 Note
(2) Within the range of 6.0 to 9.0
NR 254.123 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.124
NR 254.124 New source performance standards. The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards:
-
See PDF for table NR 254.124 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
NR 254.124 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
NR 254.124 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
NR 254.124 Note
(2) Within the range of 6.0 to 9.0
NR 254.124 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.125
NR 254.125 Pretreatment standards for existing sources. Except as provided in
ss. NR 211.13 and
211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with
ch. NR 211 and achieve the standards set forth in
s. NR 254.123.
NR 254.125 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.126
NR 254.126 Pretreatment standards for new sources. Except as provided in
s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with
ch. NR 211 and achieve the following PSNS:
-
See PDF for table NR 254.126 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
-
See PDF for table NR 254.126 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
-
See PDF for table NR 254.126 Note
(1) The limitations for hexavalent chromium apply to galvanizing operations which discharge wastewaters from the chromate rinse step.
NR 254.126 Note
(2)Within the range of 6.0 to 9.0
NR 254.126 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.127
NR 254.127 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Except as provided in
40 CFR 125.30 to
125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BCT:
-
See PDF for table NR 254.127 Note
(1) Within the range of 6.0 to 9.0
NR 254.127 History
History: Cr.
Register, May, 1989, No. 401, eff. 6-1-89.
NR 254.127 Note
Note: The Wisconsin administrative code corresponds to the code of federal regulations as cross referenced in the following table:
-
See PDF for table
