NR 297.011(1) (1) Mechanical barking installations may not discharge process wastewater pollutants into waters of the state.
NR 297.011(2) (2) The following limitations apply to hydraulic barking installations: - See PDF for table PDF
NR 297.011 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.013 NR 297.013New source performance standards. The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards.
NR 297.013(1) (1) Mechanical barking installations may not discharge process wastewater pollutants into waters of the state.
NR 297.013(2) (2) Hydraulic barking installations may not exceed the limitations set forth in s. NR 297.011 (2).
NR 297.013 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.014 NR 297.014Pretreatment standards for existing sources. Any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.014 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.015 NR 297.015Pretreatment standards for new sources. Any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.015 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
subch. II of ch. NR 297 Subchapter II - Veneer Subcategory
NR 297.02 NR 297.02Applicability; description of the veneer subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from any plant which manufactures veneer and does not store or hold raw materials in wet storage conditions.
NR 297.02 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.021 NR 297.021Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT.
NR 297.021(1) (1) Except for the installations subject to subs. (2) and (3), veneer manufacturing installations may not discharge process wastewater pollutants into waters of the state.
NR 297.021(2) (2) The following limitations apply to softwood veneer manufacturing processes which use direct steaming for the conditioning of logs: - See PDF for table PDF
NR 297.021(3) (3) The following limitations apply to hardwood veneer manufacturing processes which use direct steaming for the conditioning of logs: - See PDF for table PDF
NR 297.021 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.022 NR 297.022Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.
NR 297.022 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.023 NR 297.023New source performance standards. Any new source subject to this subchapter may not discharge wastewater pollutants to waters of the state.
NR 297.023 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.024 NR 297.024Pretreatment standards for existing sources. Any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.024 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.025 NR 297.025Pretreatment standards for new sources. Any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.025 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
subch. III of ch. NR 297 Subchapter III - Plywood Subcategory
NR 297.03 NR 297.03Applicability; description of the plywood subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from any plywood production plant which does not store or hold raw materials in wet storage conditions.
NR 297.03 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.031 NR 297.031Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.
NR 297.031 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.032 NR 297.032Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.
NR 297.032 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.033 NR 297.033New source performance standards. Any new source subject to this subchapter may not discharge process wastewater pollutants to waters of the state.
NR 297.033 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.034 NR 297.034Pretreatment standards for existing sources. Any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.034 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.035 NR 297.035Pretreatment standards for new sources. Any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.035 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
subch. IV of ch. NR 297 Subchapter IV - Dry Process Hardboard Subcategory
NR 297.04 NR 297.04Applicability; description of the dry process hardboard subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from any plant which produces hardboard using the dry matting process for forming the board mat.
NR 297.04 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.041 NR 297.041Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.
NR 297.041 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.042 NR 297.042Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.
NR 297.042 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.043 NR 297.043New source performance standards. Any new source subject to this subchapter may not discharge process wastewater pollutants to waters of the state.
NR 297.043 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.044 NR 297.044Pretreatment standards for existing sources. Any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.044 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.045 NR 297.045Pretreatment standards for new sources. Any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.045 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
subch. V of ch. NR 297 Subchapter V - Wet Process Hardboard Subcategory
NR 297.05 NR 297.05Applicability; description of the wet process hardboard subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from any plant which produces hardboard products using the wet matting process for forming the board mat.
NR 297.05 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.051 NR 297.051Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT: - See PDF for table PDF - See PDF for table PDF
NR 297.051 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.053 NR 297.053New source performance standards.
NR 297.053(1)(1) For purposes of the wet process subcategory only, “new source” means a source which is constructed at a site which has no other source covered by this chapter.
NR 297.053(2) (2) Any new source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.
NR 297.053 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.054 NR 297.054Pretreatment standards for existing sources. Any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.054 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.055 NR 297.055Pretreatment standards for new sources. Any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211.
NR 297.055 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
subch. VI of ch. NR 297 Subchapter VI - Waterborne and Nonpressure Wood Preserving Subcategory
NR 297.06 NR 297.06Applicability; description of the water borne and nonpressure wood preserving subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from pressure wood preserving treatment processes which employ water borne inorganic salts and all nonpressure wood preserving treatment processes.
NR 297.06 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.061 NR 297.061Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants to waters of the state.
NR 297.061 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.062 NR 297.062Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter may not discharge process wastewater pollutants to waters of the state.
NR 297.062 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.063 NR 297.063New source performance standards. Any new source subject to this subchapter may not discharge wastewater pollutants to waters of the state.
NR 297.063 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.064 NR 297.064Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter shall comply with ch. NR 211 and may not introduce process wastewater pollutants into a POTW.
NR 297.064 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.065 NR 297.065Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter shall comply with ch. NR 211 and may not introduce process wastewater pollutants into a POTW.
NR 297.065 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
subch. VII of ch. NR 297 Subchapter VII - Steam Wood Preserving Subcategory
NR 297.07 NR 297.07Applicability; description of the steam wood preserving subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from 4 types of operations:
NR 297.07(1) (1) Wood preserving processes which use direct steam impingment on wood as the predominant conditioning method;
NR 297.07(2) (2) Wood preserving processes which use the vapor drying process as the predominant conditioning method;
NR 297.07(3) (3) Direct steam conditioning processes which use the same retort to treat with both salt and oil type preservatives; and
NR 297.07(4) (4) Steam conditioning processes which apply both salt type and oil type preservatives to the same stock.
NR 297.07 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.071 NR 297.071Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT: - See PDF for table PDF
NR 297.071 History History: Cr. Register, April, 1989, No. 400, eff. 5-1-89.
NR 297.073 NR 297.073New source performance standards. Any new source subject to this subchapter may not discharge wastewater pollutants to waters of the state.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.