Register June 2013 No. 690
Chapter SPS 384
APPENDIX
The material contained in this appendix is for clarification purposes only. The notes, illustrations, etc., are numbered to correspond to the number of the rule as it appears in the text of the code.
A-384.10 (3) (b) Request forms for voluntary POWTS product approval may be obtained at the following location:
Department of Safety and Professional Services
Madison Office
1400 E. Washington Ave.
PO Box 7162
Madison, WI 53703-7162
Phone (608) 266-6742
Web Page http://dsps.wi.gov/programs/industry-services
A-384.11-Nationally Recognized Listing Agencies Acceptable to the Department
American Gas Association (AGA)
400 N. Capitol Street, N.W.
Washington, DC 20001
Phone (202) 824-7000

Web Page www.aga.org
American Society of Mechanical Engineers (ASME)
Three Park Avenue
New York, NY 10016-5990
Phone (212) 524-4990

Web Page www.asme.org
American Society of Sanitary Engineering (ASSE)
901 Canterbury, Suite A
Westlake, OH 44145-1166
Phone (440) 835-3040
Web Page www.asse-plumbing.org
Canadian Standards Association International (CSA)
178 Rexdale Blvd.
Toronto, ON
CANADA
M9W 1R3
Phone (800) 463-6727
Web Page www.csa-international.org
IAPMO Research and Testing, Inc. (IAPMO)
5001 E. Philadelphia St.
Ontario, CA 91761
Phone (909) 472-4100
Web Page http://www.iapmo.org/Pages/IAPMOgroup.aspx
ETL Intertek Testing Services NAE, Inc. (ITS)
3233 US Route 11
Cortland, NY 13045
Phone (607) 753-6711
Web Page http://www.intertek.com
Web Page http://www.intertek.com/marks/etl
NSF International (NSF)
789 Dixboro Rd.
Ann Arbor, MI 48105-9723
Phone (800) 673-6275
Web Page www.nsf.org
Underwriters Laboratories Inc. (UL)
333 Pfingsten Rd.
Northbrook, IL 60062-2096
Phone (847) 272-8800
Web Page www.ul.com
The listing agencies list products to a specific national standard and have labeling requirements in addition to those requirements of the standard., i.e., ASSE requires that their seal with the standard number be on the device.
A-384.20 (5) SPACING OF PLUMBING FIXTURES
Figure A-384.20-1. Spacing between water closets.
Figure A-384.20-2. Spacing between stall type urinals.
A-384.20 (5) SPACING OF PLUMBING FIXTURES (Continued)
Figure A-384.20-3. Spacing between water closet and tub.
A-384.30 (4) (e) 2. TURF SPRINKLER SYSTEM PIPING MATERIAL.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.