P = 10 if the highway is currently used by pedestrians or bicycles, and will result in increased speeds on the existing facility without providing for improved bicycle and pedestrian facilities, or = 0 for those projects that are not used by bicycles and pedestrians, or will not result in increased speeds, or where improved bicycle and pedestrian facilities are planned.
Trans 210.06(3)(f)
(f) The calculation of the safety measure score shall be based on each proposed major highway project's safety measure points relative to the proposed major highway project with the highest number of safety points. The following formula shall be used to determine the safety measure score.
Safety Measure Score = (Safety Points/ Safety Pointsmax) (100)
where:
Safety Points = the safety measure points for the proposed major highway project, as computed using procedures in par. (e).
Safety Pointsmax = the highest number of safety measure points given to any proposed major highway project under consideration for enumeration in that year, as computed using procedures in par. (e).
Trans 210.06 Note
Note: The crash rates and severity proportions are objective measures which are based on principles found in the Highway Safety Evaluation Procedural Guide, Docket No. FHWA-TS-81-219, published by the Federal Highway Administration. A copy of the Guide can be reviewed by writing or calling the Safety and Traffic Operations Engineer at the Federal Highway Administration, 567 D'Onofrio Drive, Madison, WI 53719, (608) 829-7519.
Trans 210.06(4)(a)(a) The department shall evaluate environmental considerations associated with the proposed major highway
project through a draft environmental impact statement or environmental assessment. The draft environmental impact statement or environmental assessment shall provide summary information which shall be used to determine the potential net effects the proposed major highway project may have on environmental resources.
Trans 210.06(4)(b)
(b) The net environmental effects will be computed by comparing the potential effects of the build alternatives to the no build alternative.
Trans 210.06(4)(c)
(c) A proposed major highway
project that will affect relatively more natural resources including, but not limited to, wetlands, uplands, flood plains, stream crossings and endangered species, shall be scored lower.
Trans 210.06(4)(d)
(d) A proposed major highway
project that will affect relatively more physical resources including, but not limited to, air quality, sound quality, and contaminated sites, shall be scored lower.
Trans 210.06(4)(e)
(e) A proposed major highway
project that will affect relatively more socio-economic resources including, but not limited to, agricultural land, park land, residential and business development, shall be scored lower.
Trans 210.06(4)(f)
(f) A proposed major highway
project that will affect relatively more cultural resources including, but not limited to, historic properties and archeological sites, shall be scored lower.
Trans 210.06 Note
Note: Environmental data will be collected from the environmental summary matrix provided in the draft environmental impact statement or the environmental assessment for specific impacts which apply to natural, physical, socio-economic and cultural resources.
Trans 210.06(5)(a)(a) The department shall evaluate community support or opposition to a proposed major highway project through:
Trans 210.06(5)(a)1.
1. Determining community support or opposition from local and regional officials, associations, merchants and residents through informational hearings and correspondence. Greater consideration shall be given for input that is based on the project's overall impact on the community or region.
Trans 210.06(5)(a)2.
2. Determining if the proposed major highway project is consistent with metropolitan, local or regional transportation plans that have been adopted or reaffirmed in the last 5 years. A transportation plan may include a comprehensive plan that contains a transportation component.
Trans 210.06 History
History: Cr. Register, January, 1999, No. 517, eff. 2-1-99. Trans 210.07
Trans 210.07 Weights applied to measures. Weights for each of the 5 measures shall be included in the calculation of the composite score as described in
s. Trans 210.08. Where necessary, sub-weights shall be applied to components of the measures prior to the determination of the score for the overall measure. The values and effect of both the overall measure weights and the component sub-weights are shown in Figure 1.
Trans 210.07 History
History: Cr. Register, January, 1999, No. 517, eff. 2-1-99. Trans 210.08(1)
(1)
Computation of composite score. A combination of the 5 measures, weights for each of the measures and the minimum requirement shall be used to calculate a composite score for each proposed major highway
project. Each measure shall have a maximum score of 100 points. The composite score shall have a maximum of 110 points. The following formula shall be used to determine the composite scores:
where:
- See PDF for diagram 
0 = 1 if the minimum requirements are met for either traffic flow or safety, or = 0 if the minimum requirements are not met for traffic flow and safety.
Trans 210.08(2)
(2) Minimum allowable score. The minimum allowable score for a composite score is 10 points. Only those projects which have greater than 10 points may be recommended by the department to the transportation projects commission.
Trans 210.08 History
History: Cr. Register, January, 1999, No. 517, eff. 2-1-99.
