NR 286.03(9) (9) “Small-sized” means manufacturing plants which process less than 8,200 lbs or 3,720 kg per day of raw materials.
NR 286.03 History History: Cr. Register, June, 1976, No. 246, eff. 7-1-76.
NR 286.04 NR 286.04Compliance with effluent limitations and standards. Discharge of pollutants from facilities subject to the provisions of this chapter may not exceed, as appropriate:
NR 286.04(1) (1) By July 1, 1977 effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available;
NR 286.04(2) (2) By July 1, 1983 effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable;
NR 286.04(3) (3) Pretreatment standards for discharges to publicly owned treatment works;
NR 286.04(4) (4) Standards of performance for new sources.
NR 286.04 History History: Cr. Register, June, 1976, No. 246, eff. 7-1-76; r. and recr. Register, August, 1983, No. 332, eff. 9-1-83.
NR 286.06 NR 286.06Application of effluent limitations and standards.
NR 286.06(1)(1) The effluent limitations and standards set forth in this chapter shall be used in accordance with this section to establish the quantity or quality of pollutants or pollutant properties which may be discharged by a point source subject to the provisions of this chapter, except as;
NR 286.06(1)(a) (a) They may be modified in accordance with subch. IV of ch. NR 220,
NR 286.06(1)(b) (b) They may be superseded by more stringent limitations and standards necessary to achieve water quality standards or meet other legal requirements, or
NR 286.06(1)(c) (c) They may be supplemented or superseded by standards or prohibitions for toxic pollutants or by additional limitations for other pollutants required to achieve water quality.
NR 286.06(2) (2) The production basis for application of the limitations and standards set forth in this chapter shall be the daily average of a maximum month in each subcategory subject to the provisions of this chapter.
NR 286.06 History History: Cr. Register, June, 1976, No. 246, eff. 7-1-76; correction in (1) (a) made under s. 13.92 (4) (b) 7, Stats., Register April 2018 No. 748.
NR 286.09 NR 286.09Effluent limitations, non-process wastewater. The following effluent limitations are applicable to discharges of non-process wastewater, including tread cooling water, from facilities in the pneumatic tire and inner tube subcategory which were constructed before 1959. Such facilities shall in order to minimize discharge of oil and grease in such wastewaters:
NR 286.09(1) (1) No later than July 1, 1977 employ the best practicable maintenance and housekeeping practices;
NR 286.09(2) (2) No later than July 1, 1983 employ the best available maintenance and housekeeping practices; and
NR 286.09(3) (3) Limit the oil and grease content of such wastewaters to daily average and daily maximum concentrations of 5 and 10 mg/1 respectively.
NR 286.09 History History: Cr. Register, June, 1976, No. 246, eff. 7-1-76.
NR 286.10 NR 286.10Effluent limitations, best practicable treatment. The following effluent limitations for all or specific subcategories establish, except as provided in subch. IV of ch. NR 220, the quantity or quality of pollutants or pollutant properties which may be discharged by a facility subject to the provisions of this chapter after application to process wastes of the best practicable control technology currently available.
NR 286.10(1) (1) The pH of all discharges shall be within the range of 6.0 to 9.0.
NR 286.10(2) (2) The 30-day average and daily maximum limitations for BOD5, suspended solids, and other parameters are set forth in table 1.
NR 286.10(3) (3) The limitations of table 1 are in lbs/1000 lbs or kg/1000 of raw material, for subcategories (e), (f), (g), (j) and (k) and of product for the other subcategories of s. NR 286.02.
NR 286.10(4) (4) The limitations for lead in table 1 apply only to discharges attributable to the manufacture of lead sheathed hose.
NR 286.10(5) (5) The limitations for chromium in table 1 apply only to facilities using a chromic acid form cleaning operation.
NR 286.10(6) (6) For facilities in subcategory (e), (f), or (g) having wet scrubbing operation the 30 day average and daily maximum discharge limitations for suspended solids shall be increased above those calculated from table 1 by respectively 2.9 and 5.8 lbs/1000 lbs or kg/1000 kg of raw material equivalent. - See PDF for table PDF
*These limitations are applicable only to facilities in which dry digestion processes are integrated with wet digestion processes for reclaiming rubber.
NR 286.10 History History: Cr. Register, June, 1976, No. 246, eff. 7-1-76; correction in (intro.) made under s. 13.92 (4) (b) 7, Stats., Register April 2018 No. 748.
NR 286.11 NR 286.11Effluent limitations, best available treatment. The following effluent limitations for all or specific subcategories establish the quantity or quality of pollutants or pollutant properties which may be discharged by a facility subject to the provisions of this chapter after application to process wastes of the best available technology economically achievable.
NR 286.11(1) (1) The pH of all discharges shall be within the range of 6.0 to 9.0.
NR 286.11(2) (2) The 30-day average and daily maximum limitations for BOD5, suspended solids, and other parameters are set forth in table 2.
NR 286.11(3) (3) The limitations of table 2 are in lbs/1000 lbs or kg/1000 kg of raw material for subcategories (e), (f), (g), (j) and (k) and of product for the other subcategories of s. NR 286.02.
NR 286.11(4) (4) The limitations for lead in table 2 apply only to discharges attributable to the manufacture of lead sheathed hose.
NR 286.11(5) (5) The limitations for chromium in table 2 apply only to facilities using a chromic acid form cleaning operation.
NR 286.11(6) (6) For facilities in subcategory (e), (f), or (g) having wet scrubbing operations the 30 day average and daily maximum discharge limitations for suspended solids shall be increased above those calculated from table 2 by respectively 0.5 and 1.0 lbs/1000 lbs or kg/1000 kg of raw material equivalent. - See PDF for table PDF
Subcategories are set forth in s. NR 286.02 .
*These limitations are applicable only to facilities in which dry digestion processes are integrated with wet digestion processes for reclaiming rubber.
NR 286.11 History History: Cr. Register, June, 1976, No. 246, eff. 7-1-76.
NR 286.12 NR 286.12Standards of performance. The following effluent limitations for all or specific subcategories establish the quantity or quality of pollutants or pollutant properties which may be discharged by a facility which is a new source subject to the provisions of this chapter.
NR 286.12(1) (1) The pH of all discharges shall be within the range of 6.0 to 9.0
NR 286.12(2) (2) The 30-day average and daily maximum limitations for BOD5, suspended solids, and other parameters are set forth in table 1.
NR 286.12(3) (3) The limitations of table 1 are in lbs/1000 lbs or kg/1000 kg or raw material for subcategories (e), (f), (g), (j) and (k) and of product for the other subcategories of s. NR 286.02.
NR 286.12(4) (4) The limitations for lead in table 1 apply only to discharges attributable to the manufacture of lead sheathed hose.
NR 286.12(5) (5) The limitations for chromium in table 1 apply only to facilities using a chromic acid form cleaning operation.
NR 286.12 History History: Cr. Register, June, 1976, No. 246, eff. 7-1-76.
NR 286.13 NR 286.13Pretreatment standards. The pretreatment standards for discharges to publicly owned treatment works from sources subject to the provisions of this chapter shall be as set forth in ch. NR 211.
NR 286.13 History History: Cr. Register, June, 1976, No. 246, eff. 7-1-76; r. and recr. Register, August, 1983, No. 332, eff. 9-1-83.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.