AB100-ASA1-AA8,429,73
409.410
(3) The department shall establish and maintain
, in consultation with
4the uniform commercial code statewide lien system council, computer and any other
5services necessary to support the uniform commercial code statewide lien system
6under
s. 409.410 this section but may not maintain a central filing system, as defined
7in
7 USC 1631 (c) (2), for farm products, as defined in
7 USC 1631 (c) (5).".
AB100-ASA1-AA8,429,1510
409.404
(1) (d)
Failure to file a termination statement. If the affected secured
11party fails to file a termination statement as required by this subsection, or to send
12such a termination statement within 10 days after receipt of the debtor's written
13demand the secured party is liable to the debtor for
$25 $500, and in addition
is liable 14for any loss caused to the debtor by such failure
and for reasonable attorney fees and
15court costs incurred by the debtor due to such failure.".
AB100-ASA1-AA8,429,1918
440.23
(2) (c) Pays the charge for an unpaid draft established by the
depository
19selection board state treasurer under s. 20.905 (2).".
AB100-ASA1-AA8,429,22
21"
Section 4315p. 450.04 (3) (intro.) and (a) of the statutes are consolidated,
22renumbered 450.04 (3) and amended to read:
AB100-ASA1-AA8,430,323
450.04
(3) Every candidate for examination for licensure as a pharmacist shall
24submit an application on a form provided by the department and pay the fee specified
1in s. 440.05 (1) at least 30 days before the date of examination. Every candidate shall
2also submit proof to the board that he or she
: (a) Has has received a professional
3degree from a pharmacy program approved by the board
; and.
AB100-ASA1-AA8,430,118
450.11
(1m) Electronic transmission. Except as provided in s. 453.068 (1) (c)
94., a practitioner may transmit a prescription order electronically only if the patient
10approves the transmission and the prescription order is transmitted to a pharmacy
11designated by the patient.".
AB100-ASA1-AA8,430,2015
450.11
(7) (i) No pharmacist, manufacturer, distributor, owner or operator of
16a pharmacy or agent of a pharmacist, manufacturer, distributor or such an owner or
17operator may give any compensation or anything of value to a practitioner for the
18purpose of providing, or inducing the practitioner to obtain, any equipment,
19computer software or access to a service that may be used for the electronic
20transmission of a prescription order.".
AB100-ASA1-AA8,431,623
452.05
(1) (d) After consultation with the council on real estate curriculum and
24examinations, the board, brokers and salespersons licensed under this chapter and
1interested members of the public,
establish the minimum number of hours of
2continuing education in each real estate related subject and establish criteria for the
3approval of continuing educational programs and courses required for renewal
4under s. 452.12 (5) (c) 1.
The department may not require a broker or salesperson
5to successfully complete more than 12 classroom hours of continuing education in
6order to qualify for license renewal.
AB100-ASA1-AA8,431,138
452.05
(1) (g) Approve continuing educational programs and courses in
9accordance with the criteria established under par. (d). In order to be approved, a
10continuing educational program or course must require brokers and salespersons
11who attend the program or course to pass an examination on the information
12presented at the program or course in order to successfully complete and receive
13continuing education credit for the program or course under s. 452.12 (5) (c) 1.
AB100-ASA1-AA8,431,2015
452.09
(2) (a) Each applicant for a salesperson's license shall submit to the
16department evidence satisfactory to the department of successful completion of
72
17classroom hours of educational programs approved for this purpose under s. 452.05
18(1) (c). The department may waive the requirement under this paragraph upon proof
19that the applicant has received 10 academic credits in real estate or real estate
20related law courses from an accredited institution of higher education.
AB100-ASA1-AA8,432,222
452.09
(2) (c) 2. Submit to the department evidence satisfactory to the
23department of successful completion
of 36 classroom hours of educational programs
24in business management approved for this purpose under s. 452.05 (1) (c). No
1classroom hours educational programs applied to satisfy the requirement under
2subd. 1. may be applied to satisfy the requirement under this subdivision.".
AB100-ASA1-AA8,432,85
452.12
(5) (c) 1. At the time of renewal, each broker or salesperson shall submit
6proof of attendance at and successful completion of continuing education programs
7or courses approved under s. 452.05 (1) (g)
for the minimum number of hours and in
8those subjects required under s. 452.05 (1) (d), except as provided in subd. 2.".
AB100-ASA1-AA8,432,1311
453.068
(1) (c) 4. Transmit a prescription electronically unless the client
12approves the transmission and the prescription is transmitted to a pharmacist or
13veterinarian designated by the client.".
AB100-ASA1-AA8,432,2016
459.08
(1) A person who holds a license shall notify the department in writing
17or in accordance with other notification procedures approved by the department of
18the regular address of the places where he or she engages or intends to engage in the
19practice of fitting or selling hearing aids. The licensee shall inform the board of any
20changes in these addresses within 30 days of the change.".
AB100-ASA1-AA8,433,3
11310. Page 1697, line 3: delete "purposes" and substitute "purposes.
2"Brownfields redevelopment" does not include construction of new facilities on the
3site for any purpose other than environmental remediation activities".
AB100-ASA1-AA8,433,7
51312. Page 1697, line 7: after "means" insert "investigation, analysis and
6monitoring of a brownfields facility or site to determine the existence and extent of
7actual or potential environmental pollution;".
AB100-ASA1-AA8,433,18
16"2. All of the following are unknown, cannot be located or are financially unable
17to pay the cost of brownfields redevelopment or associated environmental
18remediation activities:
AB100-ASA1-AA8,433,2019
a. The party that caused the portion of the environmental contamination that
20is the basis for the grant request.
AB100-ASA1-AA8,433,2221
b. Any person who possessed or controlled the environmental contaminant that
22is the basis for the grant request before the contaminant was released.".
AB100-ASA1-AA8,434,7
5"
(4) (a) From the appropriations under s. 20.143 (1) (br) and (qm) in fiscal year
61997-98, and from the appropriation under s. 20.143 (1) (qm) in fiscal year 1998-99,
7the".
AB100-ASA1-AA8,434,2221
560.17
(4) (intro.) Before awarding a grant
or loan under sub. (3), the board
22shall consider all of the following:".
AB100-ASA1-AA8,435,3
2"
Section 4442c. 560.19 (1) (intro.) and (b) of the statutes are consolidated,
3renumbered 560.19 (1) and amended to read:
AB100-ASA1-AA8,435,54
560.19
(1) In this section
: (b) "Hazardous, "hazardous pollution prevention"
5has the meaning given in s. 299.13 (1) (c).
AB100-ASA1-AA8,435,1410
560.19
(3) In coordination with the hazardous pollution prevention program
11under s. 36.25 (30)
, and the department of natural resources
and the council, conduct
12the department shall conduct an education, environmental management and
13technical assistance program to promote hazardous pollution prevention among
14businesses in the state.
AB100-ASA1-AA8,435,2322
560.605
(1) (e) 3. For grants under s. 560.615, not less than 50% of the cost of
23the management assessment and plan.".
AB100-ASA1-AA8,436,10
6560.615 Manufacturing assessment grants. (1) The board may award a
7grant not exceeding $2,500 under s. 560.61 to a business operating for profit, with
8500 or fewer employes, including employes of any subsidiary or affiliated
9organization, to fund a management assessment and plan if all of the following
10apply:
AB100-ASA1-AA8,436,1311
(a) The manufacturing assessment and plan are likely to assist the business
12in adopting and implementing readily available and reasonably standardized new
13manufacturing processes and technologies.
