SB163: Bill Text

LRB-0665/1

JK:sac:rs

2013 - 2014 LEGISLATURE

2013 Senate BILL 163

April 30, 2013 - Introduced by Senators Hansen, T. Cullen, Schultz, Carpenter, Erpenbach, Harris, Jauch, C. Larson, Lehman, Risser, L. Taylor, Vinehout and Wirch, cosponsored by Representatives Wright, Hesselbein, Genrich, Barnes, Goyke, Johnson, Kahl, Kolste, Ohnstad, Riemer, Sargent, Shankland, Smith, Wachs, Barca, Berceau, Bernard Schaber, Billings, Clark, Danou, Hebl, Hintz, Hulsey, Jorgensen, Mason, Milroy, Pasch, Pope, Ringhand, Sinicki, C. Taylor, Vruwink, Young, Zamarripa and Zepnick. Referred to Elections and Urban Affairs.

SB163,1,4 An Act to repeal 3.002 (2); to consolidate, renumber and amend 3.002 (intro.) and (1m); to amend 3.004 (2) and 5.15 (4) (a); to repeal and recreate subchapter I of chapter 4 [precedes 4.001]; and to create 13.49 of the statutes; relating to: legislative and congressional redistricting.

Analysis by the Legislative Reference Bureau

Currently, under the state constitution, the legislature is directed to redistrict legislative districts according to the number of inhabitants at its next session following each decennial federal census. At the same intervals, the legislature also reapportions congressional districts in this state pursuant to federal law. Under current state law, following each decennial federal census, most municipalities are also required to divide their territory into wards. With limited exceptions, wards are required to consist of one or more whole, contiguous census blocks (the smallest geographic units for which census results are available). Traditionally, the legislature has used municipal wards to construct legislative and congressional districts, although the legislature may adjust the boundaries of a municipal ward and use the revised ward boundaries instead. Legislative and congressional redistricting plans enacted pursuant to this procedure are used to elect members of the legislature and members of Congress in the fall of the second year following the year of the census.

This bill creates a new procedure for the preparation of legislative and congressional redistricting plans. The bill directs the Legislative Reference Bureau (LRB) to draw redistricting plans based upon standards specified in the bill and establishes a Redistricting Advisory Commission to perform certain tasks in the redistricting process. The bill also makes various other changes to the laws governing redistricting. Significant aspects of the bill include:

Redistricting standards

Under the bill, a redistricting plan drawn by the LRB must satisfy several criteria, including:

1. The plan must be based on population requirements imposed under the Wisconsin Constitution and the U.S. Constitution and requirements imposed under Section 2 of the federal Voting Rights Act, which, among other things, generally prohibits redistricting plans from abridging the right to vote on account of race or color or because a person is a member of a language minority group.

2. The senate and assembly districts established in the plan must satisfy equal population standards specified in the bill. Among other things, no senate district may have a population which exceeds that of any other senate district by more than ten percent and no assembly district may have a population which exceeds that of any other assembly district by more than ten percent, unless necessary to maintain compliance with Section 2 of the Voting Rights Act. Congressional districts established in the plan must each have a population as nearly equal as practicable to the ideal population for such districts, while maintaining compliance with Section 2 of the Voting Rights Act.

3. District boundaries under the plan must coincide with municipal ward boundaries and, to the extent consistent with the Wisconsin Constitution, the U.S. Constitution, and Section 2 of the Voting Rights Act, must coincide with the boundaries of political subdivisions. The number of political subdivisions divided among more than one district must be as small as possible and, with limited exceptions, if there is a choice among political subdivisions to divide, the more populous political subdivisions shall be divided before the less populous.

4. Districts must be composed of convenient contiguous territory. Under the bill, areas which meet only at the points of adjoining corners are not contiguous.

5. To the extent consistent with the requirements described in items 1. to 3., districts must be compact. The bill also specifies how compactness is to be measured.

6. In preparing the plan, the LRB must be strictly nonpartisan. No district may be drawn for the purpose of favoring a political party, incumbent legislator or member of Congress, or other person or group, or, except to the extent necessary to meet the requirements described in item 1., for the purpose of augmenting or diluting the voting strength of a language or racial minority group. The LRB may not use residence addresses of incumbent legislators or members of Congress, political affiliations of registered voters, previous election results, or, except as necessary to meet the requirements described in item 1., demographic information.

7. The number of assembly districts may not be less than 54 nor more than 100. The number of senate districts may not be more than one-third nor less than one-fourth of the number of assembly districts. Each senate district must contain only whole assembly districts and, with certain exceptions, each congressional district may contain only whole senate districts, to the extent possible.

Redistricting Advisory Commission

The bill assigns several tasks to the Redistricting Advisory Commission, including:

1. If requested to do so by the LRB, the commission must provide direction to the LRB concerning any decision the LRB must make in preparing a redistricting plan for which no clearly applicable guideline is provided under the bill.

2. The commission must make available to the public at the earliest feasible time copies of any redistricting bill delivered by the LRB to the legislature, as provided under this bill, maps illustrating the redistricting bill, a summary of the standards applicable to the LRB for development of the plan in the redistricting bill, and a statement of the population of each district created in the plan and the relative deviation of each district population from the ideal district population.

3. The commission must conduct at least three public hearings on a redistricting bill delivered by the LRB to the legislature, as provided under this bill, unless the redistricting bill represents a plan drawn in response to a redistricting bill that was previously delivered to the legislature and rejected by at least one house. The commission must submit a report to the legislature summarizing information and testimony received by the commission at the hearings. The report may also include any comments and conclusions which the commission's members deem appropriate concerning the information and testimony received at the hearings or otherwise presented to the commission.

The bill also permits the commission to establish policies limiting the information that the LRB may provide to persons outside of LRB staff concerning any redistricting plan drawn by the LRB, except that any such policy does not apply to population data furnished to the LRB by the U.S. Bureau of the Census or to a redistricting plan after a bill embodying that plan is delivered by the LRB to the legislature as required under this bill.

Under the bill, the Redistricting Advisory Commission must be created not later than February 15 of the first year following the decennial federal census and terminates upon satisfying its duties, until a new Redistricting Advisory Commission is created for the next round of legislative and congressional redistricting. The commission consists of five members. The speaker and minority leader of the assembly and the majority and minority leaders of the senate must each appoint one person to serve on the commission. Within 30 days after the fourth commission member is appointed, but not later than February 15 of the first year following the decennial federal census, the four commission members so appointed must select the fifth commission member, who serves as chairperson. The bill prohibits all of the following individuals from being a commission member: individuals who are not eligible electors of this state at the time of the appointment, individuals who hold partisan public office or political party office, and individuals who are a relative of or are employed by a member of the legislature or of Congress, or are employed directly by the legislature or Congress.

Redistricting process

The bill requires the LRB to perform certain tasks in preparation for drawing congressional and legislative redistricting plans on the basis of each federal decennial census. For example, as soon as possible after receiving from the U.S. Bureau of the Census the population data needed for legislative redistricting, the LRB must use that data to assign a population figure to geographic or political units to facilitate the drawing of redistricting plans. Typically, this data is available on or about April 1 of the first year following the decennial federal census. The LRB must also prepare and publish an analysis describing the population of current legislative and congressional districts and the extent to which the districts may violate the redistricting standards described above. In addition, as municipalities complete their ward plans (typically, by October of the first year following the decennial federal census), the LRB must assign a population figure based upon certified federal census data to each municipal ward, for use in drawing redistricting plans.

Not later than January 1 of the second year following the decennial federal census, the LRB must deliver to the majority leader of the senate and speaker of the assembly identical bills embodying a plan of legislative and congressional districting, drawn in accordance with the standards described above. The bill further specifies a procedure that the legislature must follow in considering the bills, although that procedure is not enforceable by the courts. The bill requires either the assembly or the senate to bring the bill to a vote expeditiously, but not less than seven days after the report of the Redistricting Advisory Commission is received and made available to the members of the legislature. The vote must be under a procedure or rule permitting no amendments except those of a purely corrective nature. If the bill is approved by the first house in which it is considered, the bill must expeditiously be brought to a vote in the second house under a similar procedure or rule.

If neither of the bills delivered by the LRB is approved by both the assembly and the senate, the chief clerk of the house that failed to approve the bill must transmit to the LRB information which that house may direct regarding reasons why the plan was not approved. The LRB must then prepare identical bills embodying a second plan of legislative and congressional redistricting, taking into account the reasons transmitted to the LRB, insofar as it is possible to do so while complying with the standards described above. The LRB must deliver the bill to the majority leader of the senate and the speaker of the assembly no later than 21 days after the date of the vote by which the senate or the assembly failed to approve the bill initially submitted. This second bill must be expeditiously introduced and brought to a vote not less than seven days after the date of introduction, in the same manner as prescribed for the initial bill.

If the second bill is similarly rejected by at least one house, the same procedure applies, except that the third bill is subject to amendment in the same manner as other bills.

The bill also provides exceptions to this process to account for variations in the timing of the release of federal census data.

Required contents of redistricting bills

The LRB must ensure that each bill embodying a redistricting plan it draws contains specified conventions to apply wherever territory in a plan is described by geographic boundaries. Also, each such bill must provide that the bill first applies, with respect to regular elections, to offices filled at the next occurring general election and, with respect to special or recall elections, to offices filled or contested on or after the date of the next occurring general election.

Challenge based on population inequality.

If an action is brought challenging a legislative redistricting plan adopted under the procedure established in the bill on the basis of an excessive population variance among senate or assembly districts, the legislature has the burden of justifying any variance in excess of ten percent between the population of a senate or assembly district and the applicable ideal district population. If an action is brought challenging a congressional redistricting plan adopted under the procedure established in the bill on the basis of an excessive population variance among congressional districts, the legislature has the burden of justifying any variance in excess of one percent between the population of a congressional district and the applicable ideal district population.

For further information see the state fiscal estimate, which will be printed as an appendix to this bill.

The people of the state of Wisconsin, represented in senate and assembly, do enact as follows:

SB163,1 Section 1. 3.002 (intro.) and (1m) of the statutes are consolidated, renumbered 3.002 and amended to read:

SB163,5,6 3.002 Description of territory. (intro.) In this chapter: (1m) Reference , reference to any county or municipality means that county or municipality as its boundaries exist on April 1 of the year of the federal decennial census on which the districting plan described under subch. II is based.

SB163,2 Section 2. 3.002 (2) of the statutes is repealed.

SB163,3 Section 3. 3.004 (2) of the statutes is amended to read:

SB163,5,13 3.004 (2) "Ward" means a ward prescribed by a municipality based upon municipal boundaries in effect on April 1 of the year of the federal decennial census in accordance with the most recent revision of municipal wards under s. 5.15 upon which the districting plan described under subch. II is based and used in preparing congressional and legislative redistricting plans as required under s. 4.005.

SB163,4 Section 4. Subchapter I of chapter 4 [precedes 4.001] of the statutes is repealed and recreated to read:

SB163,6,3 CHAPTER 4

SB163,6,4 subchapter i

SB163,6,6 general provisions and redistricting

SB163,6,7 4.001 Definitions. In this chapter, unless the context requires otherwise:

SB163,6,8 (1) "Block" has the meaning given in s. 5.02 (1q).

SB163,6,10 (2) "Commission" means the redistricting advisory commission established under s. 13.49.

SB163,6,12 (3) "Plan" means a plan for legislative and congressional reapportionment prepared under this subchapter.

SB163,6,14 (4) "Political subdivision" means a city, town, village, or county within this state.

SB163,6,15 (5) "Section 2 of the Voting Rights Act" means 42 U.S.C. 1973.

SB163,6,18 (6) "Ward" means a municipal ward in effect on April 1 of the year of the federal decennial census and and used in preparing congressional and legislative redistricting plans as required under s. 4.005.

SB163,6,21 4.002 Political subdivision boundaries. In this chapter, reference to any political subdivision means that political subdivision as its boundaries exist on April 1 of the year of the federal decennial census.

SB163,6,25 4.003 Legislative districts established. This state is divided into 33 senate districts, each composed of 3 assembly districts. Each senate district may elect one member of the senate. Each assembly district may elect one representative to the assembly.

SB163,7,4 4.004 Preparations for redistricting. (1) The legislative reference bureau shall acquire appropriate information, review and evaluate available facilities, and develop programs and procedures in preparation for drawing congressional and legislative redistricting plans on the basis of each federal decennial census.

SB163,7,9 (2) By December 1 of the year of the decennial federal census, the legislative reference bureau shall obtain from the U.S. bureau of the census information regarding geographic and political units in this state for which federal census population data has been gathered and will be tabulated. The legislative reference bureau shall use the information to do all of the following:

SB163,7,12 (a) Prepare necessary descriptions of geographic and political units for which census data will be reported and which are suitable for use as components of legislative districts.

SB163,7,15 (b) Prepare maps of geographic and political units within the state which may be used to illustrate the locations of district boundaries proposed in plans prepared in accordance with s. 4.007.

SB163,7,25 (3) As soon as possible after receiving from the U.S. bureau of the census the population data needed for legislative redistricting which the U.S. bureau of the census is required to provide this state under P. L. 94-171, the legislative reference bureau shall use that data to assign a population figure based upon certified federal census data to each geographic or political unit described under sub. (2) (b). The legislative reference bureau shall prepare and publish an analysis describing the population of current legislative and congressional districts and the extent to which the districts may violate the standards under s. 4.007. Upon satisfying these requirements, the legislative reference bureau shall begin the preparation of congressional and legislative redistricting plans as required under s. 4.006.

SB163,8,7 4.005 Use of municipal ward plans. After receipt of a division ordinance or resolution under s. 5.15 (4) (b), the legislative reference bureau shall use the data obtained from the U.S. bureau of the census under s. 4.004 (3) to assign a population figure based upon certified federal census data to each ward established in the division ordinance or resolution. The legislative reference bureau shall use each ward to which a population figure is assigned in preparing congressional and legislative redistricting plans as required under s. 4.006.

SB163,8,18 4.006 Preparation of redistricting plans. (1) Not later than January 1 of the 2nd year following the decennial federal census, the legislative reference bureau shall deliver to the majority leader of the senate and speaker of the assembly identical bills creating plans of legislative and congressional redistricting, prepared in accordance with s. 4.007. Either the assembly or the senate shall bring the bill to a vote expeditiously, but not less than 7 days after the commission report under s. 13.49 (3) (c) 2. is received and made available to the members of the legislature. The vote shall be under a procedure or rule permitting no amendments except those of a purely corrective nature. If the bill is approved by the first house in which it is considered, the bill shall expeditiously be brought to a vote in the 2nd house under a similar procedure or rule.

SB163,9,8 (2) If neither of the bills delivered by the legislative reference bureau under sub. (1) is approved by both the assembly and the senate, the chief clerk of the house that failed to approve the bill shall immediately transmit to the legislative reference bureau information which that house may direct regarding reasons why the plan was not approved. The legislative reference bureau shall prepare identical bills embodying a 2nd plan of legislative and congressional redistricting prepared in accordance with s. 4.007 and taking into account the reasons transmitted to the legislative reference bureau under this subsection insofar as it is possible to do so within the requirements of s. 4.007. The legislative reference bureau shall deliver the bills to the majority leader of the senate and the speaker of the assembly no later than 21 days after the date of the vote by which the senate or the assembly failed to approve the bill submitted under sub. (1). Any bill delivered by the legislative reference bureau under this subsection shall be expeditiously introduced and brought to a vote not less than 7 days after the date of introduction, in the same manner as prescribed for the bill required under sub. (1).