101.651(3m)(b)
(b) A county shall enforce those provisions of an ordinance enacted under
s. 101.65 (1) (a) related to construction site erosion in its unincorporated area. A town may not enforce those provisions of an ordinance enacted under
s. 101.65 (1) (a) related to construction site erosion unless the department delegates enforcement authority to the town. If the town requests delegation of enforcement authority, the department shall delegate that authority if the town submits information to the department that demonstrates the town's capacity to comply with
s. 101.653 (5) (a).
101.651(4)
(4) Data relating to housing starts in municipalities. Municipalities shall furnish statistical data relating to housing starts to the department as requested by the department.
101.651(5)
(5) Effect of section on certain laws. This section does not affect the applicability of rules or an ordinance adopted under this subchapter to builders, designers and owners of dwellings located in a municipality.
101.651(6)
(6) Energy conservation rules; continuing effect. Any dwelling not inspected under
s. 101.65 shall comply with the rules adopted under
s. 101.63 (1) which take into account the conservation of energy in construction and maintenance of dwellings and the costs of specific code provisions to home buyers in relationship to the benefits derived from the provisions.
101.653
101.653
Construction site erosion control. 101.653(1)
(1)
Definition. In this section, "best management practices" means practices, techniques or measures that the department determines to be effective means of preventing or reducing pollutants of surface water generated from construction sites.
101.653(2)
(2) Soil erosion prevention rules. The department shall promulgate rules that establish standards for practices to prevent soil erosion related to the construction of one- and 2-family dwellings, subject to all of the following requirements:
101.653(2)(a)
(a) At a minimum, the rules shall require the use of best management practices.
101.653(2)(b)
(b) The rules shall require the use of more restrictive or additional practices on an area with a slope that is greater than 12%.
101.653(2m)
(2m) Rules for administration. The department shall promulgate rules for the administration of construction site erosion control under this subchapter by counties, cities, villages and towns, including provisions regarding the issuance of permits and the collection and distribution of fees.
101.653(4)
(4) Applicability of local subdivision regulation. All powers granted to a county, city, village or town under
s. 236.45 may be exercised by it with respect to construction site erosion control regulation if the county, city, village or town has or provides a planning commission or agency.
101.653(5)
(5) Municipal responsibilities; department review. 101.653(5)(a)(a) Each city, village, town or county that enforces those provisions of an ordinance enacted under
s. 101.65 (1) (a) related to construction site erosion shall do all of the following:
101.653(5)(a)1.
1. Obtain the services of an inspector certified to conduct all inspections related to the soil erosion control standards under this section.
101.653(5)(a)2.
2. Obtain the services of a plan reviewer certified to review all erosion control plans submitted under this section.
101.653(5)(a)3.
3. Review erosion control plans, conduct inspections of erosion control practices and enforce the requirements of this section as provided in
s. 101.65 (1) (d).
101.653(5)(a)4.
4. Complete the review of an erosion control plan no later than the 15th working day after the day that the erosion control plan is submitted.
101.653(5)(b)
(b) The department shall review the construction site erosion control program for one- and 2-family dwellings of each city, village, town or county that enforces those provisions of an ordinance enacted under
s. 101.65 (1) (a) related to construction site erosion to ascertain compliance with
par. (a) and the rules promulgated under this section. This review shall include all of the following:
101.653(5)(b)1.
1. A performance audit of the erosion control program of the county, city, village or town.
101.653(5)(b)2.
2. A written determination by the department, issued every 3 years, of whether or not the county, city, village or town complies with
par. (a).
101.653(6m)
(6m) Review. The department and the department of natural resources shall enter into a memorandum of agreement that establishes a process for reviewing the standards established under
sub. (2), periodically updating those standards and reviewing the training program. The memorandum of understanding shall ensure that local officials and other persons interested in the standards established under
sub. (2) and the training program may participate in the process.
101.653(7)(a)(a) A county, city, village or town may submit orders to abate violations of those provisions of an ordinance enacted under
s. 101.65 (1) (a) related to construction site erosion to the district attorney, the corporation counsel or the attorney general for enforcement. The district attorney, the corporation counsel or the attorney general may enforce those orders.
101.653(7)(b)
(b) The department or a city, village, town or county may issue a special order directing the immediate cessation of work on a one- or 2-family dwelling until the necessary plan approval is obtained or until the site complies with the rules promulgated under
sub. (2).
101.653 History
History: 1991 a. 309.
101.654
101.654
Contractor financial responsibility certification. 101.654(1)(a)(a) Subject to
par. (b), no person may obtain a building permit unless the person annually obtains from the department a certificate of financial responsibility showing that the person is in compliance with
sub. (2).
101.654(1)(b)
(b) Paragraph (a) does not apply to an owner of a dwelling who resides or will reside in the dwelling and who applies for a building permit to perform work on that dwelling.
101.654(2)
(2) An applicant for a certificate of financial responsibility shall provide to the satisfaction of the department proof of all of the following:
101.654(2)(a)
(a) That the applicant has in force one of the following:
101.654(2)(a)1.
1. A bond endorsed by a surety company authorized to do business in this state of not less than $5,000, conditioned upon the applicant complying with all applicable provisions of the one- and 2-family dwelling code and any ordinance enacted under
s. 101.65 (1) (a).
101.654(2)(a)2.
2. A policy of general liability insurance issued by an insurer authorized to do business in this state insuring the applicant in the amount of at least $250,000 per occurrence because of bodily injury to or death of others or because of damage to the property of others.
101.654(2)(b)
(b) If the applicant is required under
s. 102.28 (2) (a) to have in force a policy of worker's compensation insurance or if the applicant is self-insured in accordance with
s. 102.28 (2) (b), that the applicant has in force a policy of worker's compensation insurance issued by an insurer authorized to do business in this state or is self-insured in accordance with
s. 102.28 (2) (b).
101.654(2)(c)
(c) If the applicant is required to make state unemployment insurance contributions under
ch. 108 or is required to pay federal unemployment compensation taxes under
26 USC 3301 to
3311, that the applicant is making those contributions or paying those taxes as required.
101.654(2m)
(2m) If an applicant wishes to use a bond under
sub. (2) (a) 1. of less than $25,000 to comply with
sub. (2) (a), the applicant shall agree not to perform any work on a dwelling for which the estimated cost of completion is greater than the amount of the bond. The department shall indicate any restriction under this subsection on the certificate of financial responsibility issued under
sub. (3).
101.654(3)
(3) Upon receipt of the proof required under
sub. (2) and the fee required by rules promulgated under
s. 101.63 (2m), the department shall issue to the applicant a certificate of financial responsibility. A certificate of financial responsibility issued under this subsection is valid for one year after the date of issuance, unless sooner suspended or revoked.
101.654(4)(a)(a) A bond or insurance policy required under
sub. (2) may not be canceled by the person insured under the bond or policy or by the surety company or insurer except on 30 days' prior written notice served on the department in person or by 1st class mail or, if the cancellation is for nonpayment of premiums to the insurer, on 10 days' prior written notice served on the department in person or by 1st class mail. The person insured under the bond or policy shall file with the department proof to the satisfaction of the department of a replacement bond or replacement insurance within the 30-day notice period or 10-day notice period, whichever is applicable, and before the expiration of the bond or policy. The department shall suspend without prior notice or hearing the certificate of financial responsibility of a person who does not file satisfactory proof of a replacement bond or replacement insurance as required by this subsection.
101.654(4)(b)
(b) A bond under
sub. (2) (a) 1. shall be executed in the name of the state for the benefit of any person who sustains a loss as a result of the person insured under the bond not complying with an applicable provision of the one- and 2-family dwelling code or any ordinance enacted under
s. 101.65 (1) (a), except that the aggregate liability of the surety to all persons may not exceed the amount of the bond.
101.66
101.66
Compliance and penalties. 101.66(1)
(1) Every builder, designer and owner shall use building materials, methods and equipment which are in conformance with the one- and 2-family dwelling code.
101.66(2)
(2) All inspections shall be by persons certified by the department.
101.66(3)
(3) Whoever violates this subchapter shall forfeit to the state not less than $25 nor more than $500 for each violation. Each day that such violation continues constitutes a separate offense.
101.66 History
History: 1975 c. 404.
MANUFACTURED BUILDING CODE
101.70
101.70
Purpose. The purpose of this subchapter is to establish statewide standards and inspection procedures for the manufacture and installation of manufactured buildings for dwellings and to promote interstate uniformity in standards for manufactured buildings by authorizing the department to enter into reciprocal agreements with other states which have equivalent standards.
101.70 History
History: 1975 c. 405.
101.71
101.71
Definitions. In this subchapter:
101.71(1)
(1) "Closed construction" means any building, building component, assembly or system manufactured in such a manner that it cannot be inspected before installation at the building site without disassembly, damage or destruction.
101.71(2)
(2) "Dwelling" means any building that contains one or more dwelling units. "Dwelling unit" means a structure or that part of a structure which is used or intended to be used as a home, residence or sleeping place by one person or by 2 or more persons maintaining a common household, to the exclusion of all others.
101.71(3)
(3) "Insignia" means a device or seal approved by the department to certify compliance with this subchapter.
101.71(4)
(4) "Installation" means the assembly of a manufactured building on-site and the process of affixing a manufactured building to land, a foundation, footing or an existing building.
101.71(5)
(5) "Manufacture" means the process of making, fabricating, constructing, forming or assembling a product from raw, unfinished, semifinished or finished materials.
101.71(6)(a)(a) "Manufactured building" means any structure or component thereof which is intended for use as a dwelling and:
101.71(6)(a)1.
1. Is of closed construction and fabricated or assembled on-site or off-site in manufacturing facilities for installation, connection, or assembly and installation, at the building site; or
101.71(6)(a)2.
2. Is a building of open construction which is made or assembled in manufacturing facilities away from the building site for installation, connection, or assembly and installation, on the building site and for which certification is sought by the manufacturer.
101.71(6)(b)
(b) "Manufactured building" does not mean any manufactured home under
s. 101.91 or any building of open construction which is not subject to
par. (a) 2.
101.71(7)
(7) "Open construction" means any building, building component, assembly or system manufactured in such a manner that it can be readily inspected at the building site without disassembly, damage or destruction.
101.715
101.715
Application. This subchapter applies to a dwelling the initial construction of which was commenced on or after December 1, 1978, except that
s. 101.745 applies to a manufactured building the initial manufacture of which was commenced on or after May 23, 1978.
101.715 History
History: 1989 a. 109.
101.72
101.72
Dwelling code council. The dwelling code council shall review the standards and rules for manufactured buildings for dwellings and recommend a statewide manufactured building code for adoption by the department which shall include rules providing for the conservation of energy in the construction and maintenance of dwellings. Such rules shall take into account the costs to home buyers of specific code provisions in relation to the benefits derived therefrom. Upon its own initiative or at the request of the department, the council shall consider and make recommendations to the department pertaining to rules and any other matters related to this subchapter.
101.72 History
History: 1975 c. 405.
101.73
101.73
Departmental duties. The department shall:
101.73(1)
(1) Adopt rules which establish standards for the use of building materials, methods and equipment in the manufacture and installation of manufactured buildings for use as dwellings or dwelling units. Where feasible, the standards used shall be those nationally recognized and shall apply to the dwelling and to its electrical, heating, ventilating, air conditioning and other systems. Such rules shall take into account the conservation of energy in construction and maintenance of dwellings and the costs to home buyers of specific code provisions in relation to the benefits derived therefrom.
101.73(1m)
(1m) Adopt a rule which requires any manufactured building which uses electricity for space heating to be superinsulated.
101.73(2)
(2) Adopt rules for the examination of plans and specifications and for periodic in-plant and on-site inspections of manufacturing facilities, processes, fabrication, assembly and installation of manufactured buildings to ensure that examinations and inspections are made in compliance with the rules adopted for construction, electrical wiring, heating, ventilating, air conditioning and other systems under
ss. 101.70 to
101.77 and with the rules for indoor plumbing adopted by the department under
ch. 145.
101.73(3)
(3) Provide for examination of plans and specifications and in-plant inspections when contracted for by the manufacturer under
s. 101.75 (1) and shall contract to provide on-site inspection services for the installation of manufactured buildings for dwellings, at municipal expense, for any municipality which requires such service under
s. 101.76 or
101.761.
101.73(5)
(5) Adopt rules for the certification, including provisions for suspension and revocation thereof, of on-site inspectors of the installation of manufactured buildings for dwellings. Persons certified as on-site inspectors may be employees of the department, a city, village, town or county or an independent agency.
101.73(6)
(6) Adopt rules for the certification, including provisions for suspension and revocation thereof, of independent inspection agencies to conduct in-plant inspections of manufacturing facilities, processes, fabrication and assembly of manufactured buildings for dwellings and to certify compliance with this subchapter.
101.73(7)
(7) Issue or recognize an insignia of compliance for dwellings which conform to the manufactured building code.
101.73(8)
(8) Biennially review the rules promulgated under this subchapter.
101.73(9)
(9) Issue special orders which it deems necessary to secure compliance with this subchapter and enforce the same by all appropriate administrative and judicial proceedings.
101.73(10)
(10) Prescribe and furnish to municipalities a standard building permit form for all new one- and 2-family dwellings.
101.73(11)
(11) Hear petitions regarding the manufactured building code, rules and special orders in accordance with
s. 101.02 (6) (e) to
(i) and
(8).
101.73(12)
(12) Establish by rule a schedule of fees sufficient to defray the costs incurred under this subchapter.
101.74
101.74
Departmental powers. The department may:
101.74(1)
(1) Hold hearings on any matter relating to this subchapter.
101.74(2)
(2) At the request of the owner or renter enter, inspect and examine dwellings, dwelling units and premises necessary to ascertain compliance with the rules and special orders under this subchapter.
101.74(2m)
(2m) Study the operation of the dwelling construction code and other laws related to the construction of dwelling units to determine their impact upon the cost of building construction and their effectiveness upon the health, safety and welfare of the occupants.
101.74(3)
(3) Revise the rules under this subchapter after consultation with the dwelling code council.
101.74(4)
(4) Provide for or engage in the testing, approval and certification of materials, devices and methods for the manufacture or installation of manufactured buildings.
101.74(5)
(5) Collect and publish data secured from the examinations and inspections under
s. 101.73 (2) and
(3), and from building permits.
