Effective date note
NOTE: Par. (d) is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
(d) Been found guilty in any civil or criminal proceeding of any action constituting fraud in connection with the driller's or pump installer's well drilling, heat exchange drilling, or pump installing operations.
280.13(3)
(3) The department shall serve a copy of the complaint with notice of the suspension of license, if ordered by the department, on the person complained against, and the person shall file an answer with the department and the complainant within 10 days after service. The department shall set the matter for hearing as promptly as possible and within 30 days after the date on which the complaint was filed. Either party may appear at the hearing in person or by attorney or agent.
280.13(4)
(4) The department may not make an order revoking a license under
sub. (2) until after a public hearing to be held before the department in the county where the licensee has his or her place of business. If the licensee is a nonresident, the hearing shall be at the place that the department designates. At least 10 days prior to the hearing the department shall send written notice of the time and place of the hearing to the licensee and to the licensee's attorney or agent of record by mailing the notice to the last-known address of those persons. The testimony presented and proceedings had at the hearing shall be recorded and preserved as the records of the department. The department shall as soon as possible after the hearing make its findings and determination and send a copy to each interested party.
280.13(5)
(5) One year after the date of revocation or thereafter a person whose license was revoked may apply for a new license.
280.13(6)
(6) No individual whose license has been revoked under this section may, during the period in which the revocation is effective, engage in any well drilling or pump installing activity except under the direct supervision of a licensed well driller or licensed pump installer and as an employee of a licensed well driller, a licensed pump installer, a registered well drilling business, or a registered pump installing business.
Effective date note
NOTE: Sub. (6) is affected eff. 4-1-15 by
2011 Wis. Act 150 to read:.
Effective date text
(6) (a) No individual whose driller license has been revoked under this section may, during the period in which the revocation is effective, engage in any drilling activity for which the license was issued except under the direct supervision of an individual holding a license to conduct that activity and as an employee of a licensed driller or a registered drilling business.
Effective date text
(b) No individual whose pump installer's license has been revoked under this section may, during the period in which the revocation is effective, engage in any pump installing activity except under the direct supervision of an individual holding a pump installer's license and as an employee of a licensed pump installer or registered pump installing business.
280.13 Cross-reference
Cross-reference: See also ch.
NR 122 and s.
NR 128.60, Wis. adm. code.
280.15
280.15
Well drilling and pump installing; registration; licensing; qualifications; fee. 280.15(1)(a)(a)
Registration requirement. No person may engage in the business of well drilling or pump installing in this state unless the person obtains registration under this paragraph as a well drilling business or pump installing business, except as follows:
Effective date note
NOTE: Section 280.15 (title) and (1) (a) (intro.) are amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
280.15 Drilling and pump installing; registration; licensing; qualifications; fee. (1) Business registration. (a) Registration requirement. No person may engage in the business of well drilling or heat exchange drilling in this state unless the person obtains registration under this paragraph as a drilling business, and no person may engage in the business of pump installing in this state unless the person obtains registration under this paragraph as a pump installing business, except as follows:
280.15(1)(a)1.
1. An individual who is a licensed well driller or a licensed pump installer is not required to obtain registration.
Effective date note
NOTE: Subd. 1. is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
1. An individual who is a licensed driller or a licensed pump installer is not required to obtain registration.
280.15(1)(a)2.
2. An individual who is employed by or works under contract with a licensed well driller or a licensed pump installer is not required to obtain registration.
Effective date note
NOTE: Subd. 2. is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
2. An individual who is employed by a licensed driller or a licensed pump installer is not required to obtain registration.
280.15(1)(a)3.
3. An individual who is employed by or works under contract with a person who is registered under this paragraph is not required to obtain registration.
Effective date note
NOTE: Subd. 3. is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
3. An individual who is employed by a person who is registered under this paragraph is not required to obtain registration.
280.15(1)(am)
(am)
Prerequisite. The department may not grant registration under
par. (a) to a person to engage in the business of well drilling unless the person is a licensed well driller, a licensed well driller has an ownership interest in the business, or the person employs or contracts with a licensed well driller. The department may not grant registration under
par. (a) to a person to engage in the business of pump installing unless the person is a licensed pump installer, a licensed pump installer has an ownership interest in the business, or the person employs or contracts with a licensed pump installer.
Effective date note
NOTE: Par. (am) is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
(am) Prerequisite. The department may not grant registration under par. (a) to a person to engage in the business of well drilling or heat exchange drilling unless the person is a licensed driller, a licensed driller has an ownership interest in the business, or the person employs or contracts with a licensed driller. The department may not grant registration under par. (a) to a person to engage in the business of pump installing unless the person is a licensed pump installer, a licensed pump installer has an ownership interest in the business, or the person employs or contracts with a licensed pump installer.
280.15(1)(b)
(b)
Application. A person who seeks to register a well drilling business or pump installing business shall apply to the department for registration of each place of business or retail outlet he or she operates as a well drilling business, pump installing business, or both, upon forms prepared by the department for this purpose. The application shall be accompanied by a registration fee for each place of business or retail outlet included in the application.
Effective date note
NOTE: Par. (b) is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
(b) Application. A person who seeks to register a drilling business or pump installing business shall apply to the department for registration of each place of business or retail outlet he or she operates as a drilling business or pump installing business, or both, upon forms prepared by the department for this purpose. The application shall be accompanied by a registration fee for each place of business or retail outlet included in the application.
280.15(1)(c)
(c)
Renewal. In order to retain registration as a well drilling business or pump installing business a person shall apply for registration renewal and pay the required registration fees annually on or before January 1.
Effective date note
NOTE: Par. (c) is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
(c) Renewal. In order to retain registration as a drilling business or pump installing business a person shall apply for registration renewal and pay the required registration fees annually on or before January 1.
280.15(1)(d)
(d)
Registration fee. The fees required for registration application or annual renewal are as follows:
Effective date note
NOTE: Subd. 1. is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
1. Drilling business, $50.
280.15(1)(d)3.
3. Well drilling business and pump installing business, $75.
Effective date note
NOTE: Subd. 3. is amended eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
3. Drilling business and pump installing business, $75.
280.15(1)(e)
(e)
Late fees. A person who files an application for registration renewal or who fails to pay the required annual registration fees after January 1 shall pay a late penalty of $15.
280.15(1)(f)
(f)
Expiration. All registrations issued under this subsection expire on December 31 of each year and are not transferable.
280.15(2m)
(2m) Well driller and pump installer licensing. 280.15(2m)(a)(a) Application. An individual who seeks a well driller or pump installer license shall apply to the department on a form prepared by the department. The individual shall include the fee specified in
par. (c) with the application, except that an individual who is eligible for the veterans fee waiver program under
s. 45.44 is not required to pay the fee.
280.15(2m)(b)
(b)
Renewal. In order to retain his or her license as a well driller or pump installer an individual shall comply with requirements for continuing education promulgated by the department by rule and shall apply for license renewal and pay the required license fees under
par. (c) annually on or before January 1.
280.15(2m)(c)
(c)
Fees. The license fees required for license application or annual renewal are as follows:
280.15(2m)(d)
(d)
Late fees. An individual who files an application for license renewal or pays the required annual fees after January 1 shall pay a late penalty of $15.
280.15(2m)(e)
(e)
Prerequisites for pump installer license. The department may not issue a pump installer license unless the applicant demonstrates competency in pump installing by passing an examination administered by the department.
280.15(2m)(f)
(f)
Prerequisites for well driller license. The department may not issue a well driller license unless all of the following apply:
280.15(2m)(f)1.
1. The applicant demonstrates competency in well drilling by passing an examination administered by the department.
280.15(2m)(f)2.
2. Except as provided in
par. (g), the applicant has been a registered drilling rig operator for at least 2 years within the 5 years before applying, has complied with training and continuing education requirements under
sub. (3g), and has the well drilling experience required by the department by rule.
280.15(2m)(g)1.1. The department may issue a well driller license to an applicant who does not comply with
par. (f) 2. if the applicant complies with
par. (f) 1. and holds a well driller license in good standing from another state and the department determines that the other state has laws and rules governing well drilling and licensing of well drillers that are substantially similar to this state's laws and rules.
280.15(2m)(g)2.
2. The department shall establish alternative requirements to
par. (f) 2. for applicants who have gained well drilling experience before June 1, 2008.
Effective date note
NOTE: Sub. (2m) is affected eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
(2m) Driller and pump installer licensing. (a) Application. An individual who seeks a driller or pump installer license shall apply to the department on a form prepared by the department. The individual shall include the fee specified in par. (c) with the application, except that an individual who is eligible for the veterans fee waiver program under s. 45.44 is not required to pay the fee.
Effective date text
(am) Activities authorized under driller license. In issuing a driller license under this subsection, the department may specify that the license is limited to the authority to engage only in well drilling or to the authority to engage only in heat exchange drilling.
Effective date text
(b) Renewal. In order to retain his or her license as a driller or pump installer an individual shall do all of the following:
Effective date text
1. Comply with requirements for continuing education promulgated by the department by rule. The department shall require continuing education specific to well drilling for individuals seeking to retain a driller license that authorizes well drilling and shall require continuing education specific to heat exchange drilling for individuals seeking to retain a driller license that authorizes heat exchange drilling.
Effective date text
2. Apply for license renewal and pay the required license fees under par. (c) annually on or before January 1.
Effective date text
(c) Fees. The license fees required for license application or annual renewal are as follows:
Effective date text
1. Driller, $50.
Effective date text
2. Pump installer, $25.
Effective date text
(d) Late fees. An individual who files an application for license renewal or pays the required annual fees after January 1 shall pay a late penalty of $15.
Effective date text
(e) Prerequisites for pump installer license. The department may not issue a pump installer license unless the applicant demonstrates competency in pump installing by passing an examination administered by the department.
Effective date text
(f) Prerequisites for driller license. 1m. The department may not issue a driller license that authorizes well drilling unless all of the following apply:
Effective date text
a. The applicant demonstrates competency in well drilling by passing an examination administered by the department.
Effective date text
b. Except as provided in par. (g), the applicant has been a registered drilling rig operator for at least 2 years within the 5 years before applying, has complied with training and continuing education requirements under sub. (3g), and has the well drilling experience required by the department by rule.
Effective date text
2m. The department may not issue a driller license that authorizes heat exchange drilling unless all of the following apply:
Effective date text
a. The applicant demonstrates competency in heat exchange drilling by passing an examination administered by the department.
Effective date text
b. Except as provided in par. (g), the applicant has been a registered drilling rig operator for at least 2 years within the 5 years before applying, has complied with training and continuing education requirements under sub. (3g), and has the heat exchange drilling experience required by the department by rule.
Effective date text
(g) Exceptions. 1. The department may issue a driller license to an applicant who does not comply with par. (f) 1m. b. or 2m. b. if the applicant complies with par. (f) 1m. a. or 2m. a. and holds a driller license in good standing from another state and the department determines that the other state has laws and rules governing well drilling and heat exchange drilling and licensing of well drillers and heat exchange drillers that are substantially similar to this state's laws and rules.
Effective date text
2. The department shall establish alternative requirements to par. (f) 1m. b. for applicants who have gained well drilling experience before June 1, 2008. The department shall establish alternative requirements to par. (f) 2m. b. for applicants who have gained heat exchange drilling experience before April 1, 2015.
280.15(3g)
(3g) Drilling rig operator registration. 280.15(3g)(a)(a)
Application. An individual who seeks registration as a drilling rig operator shall apply to the department on a form prepared by the department. The individual shall include a fee of $25, except that an individual who is eligible for the veterans fee waiver program under
s. 45.44 is not required to pay the fee.
280.15(3g)(b)
(b)
Renewal. In order to retain registration as a drilling rig operator an individual shall complete training approved by the department and comply with requirements for continuing education promulgated by the department by rule and shall apply for registration renewal and pay a fee of $25 annually on or before January 1.
Effective date note
NOTE: Par. (b) is affected eff. 4-1-15 by
2011 Wis. Act 150 to read:
Effective date text
(b) Renewal. In order to retain registration as a drilling rig operator an individual shall do all of the following:
Effective date text
1. Complete training approved by the department.
Effective date text
2. Comply with requirements for continuing education promulgated by the department by rule. The department shall require continuing education specific to well drilling for individuals seeking to retain a drilling rig operator's registration that authorizes well drilling and shall require continuing education specific to heat exchange drilling for individuals seeking to retain a drilling rig operator's registration that authorizes heat exchange drilling.
Effective date text
3. Apply for registration renewal and pay a fee of $25 annually on or before January 1.
280.15(3g)(d)
(d)
Late fees. An individual who files an application for registration renewal or who pays the required annual fee after January 1 shall pay a late penalty of $15.
280.15(3r)(a)(a)
Requirement. Except as provided in
par. (b) and
sub. (4), an individual who is not a licensed well driller or a registered drilling rig operator may only engage in well drilling if the individual is under the supervision of a licensed well driller or a registered drilling rig operator who is on the site of the well drilling.
