280.13(6)(a)(a) No individual whose driller license has been revoked under this section may, during the period in which the revocation is effective, engage in any drilling activity for which the license was issued except under the direct supervision of an individual holding a license to conduct that activity and as an employee of a licensed driller or a registered drilling business.
280.13(6)(b)
(b) No individual whose pump installer's license has been revoked under this section may, during the period in which the revocation is effective, engage in any pump installing activity except under the direct supervision of an individual holding a pump installer's license and as an employee of a licensed pump installer or registered pump installing business.
280.13 Cross-reference
Cross-reference: See also ch.
NR 122, Wis. adm. code.
280.15
280.15
Drilling and pump installing; registration; licensing; qualifications; fee. 280.15(1)(a)(a)
Registration requirement. No person may engage in the business of well drilling or heat exchange drilling in this state unless the person obtains registration under this paragraph as a drilling business, and no person may engage in the business of pump installing in this state unless the person obtains registration under this paragraph as a pump installing business, except as follows:
280.15(1)(a)1.
1. An individual who is a licensed driller or a licensed pump installer is not required to obtain registration.
280.15(1)(a)2.
2. An individual who is employed by a licensed driller or a licensed pump installer is not required to obtain registration.
280.15(1)(a)3.
3. An individual who is employed by a person who is registered under this paragraph is not required to obtain registration.
280.15(1)(am)
(am)
Prerequisite. The department may not grant registration under
par. (a) to a person to engage in the business of well drilling or heat exchange drilling unless the person is a licensed driller, a licensed driller has an ownership interest in the business, or the person employs or contracts with a licensed driller. The department may not grant registration under
par. (a) to a person to engage in the business of pump installing unless the person is a licensed pump installer, a licensed pump installer has an ownership interest in the business, or the person employs or contracts with a licensed pump installer.
280.15(1)(b)
(b)
Application. A person who seeks to register a drilling business or pump installing business shall apply to the department for registration of each place of business or retail outlet he or she operates as a drilling business or pump installing business, or both, upon forms prepared by the department for this purpose. The application shall be accompanied by a registration fee for each place of business or retail outlet included in the application.
280.15(1)(c)
(c)
Renewal. In order to retain registration as a drilling business or pump installing business a person shall apply for registration renewal and pay the required registration fees annually on or before January 1.
280.15(1)(d)
(d)
Registration fee. The fees required for registration application or annual renewal are as follows:
280.15(1)(d)3.
3. Drilling business and pump installing business, $75.
280.15(1)(e)
(e)
Late fees. A person who files an application for registration renewal or who fails to pay the required annual registration fees after January 1 shall pay a late penalty of $15.
280.15(1)(f)
(f)
Expiration. All registrations issued under this subsection expire on December 31 of each year and are not transferable.
280.15(2m)
(2m) Driller and pump installer licensing. 280.15(2m)(a)(a)
Application. An individual who seeks a driller or pump installer license shall apply to the department on a form prepared by the department. The individual shall include the fee specified in
par. (c) with the application, except that an individual who is eligible for the veterans fee waiver program under
s. 45.44 is not required to pay the fee.
280.15(2m)(am)
(am)
Activities authorized under driller license. In issuing a driller license under this subsection, the department may specify that the license is limited to the authority to engage only in well drilling or to the authority to engage only in heat exchange drilling.
280.15(2m)(b)
(b)
Renewal. In order to retain his or her license as a driller or pump installer an individual shall do all of the following:
Effective date text
1. Comply with requirements for continuing education promulgated by the department by rule. The department shall require continuing education specific to well drilling for individuals seeking to retain a driller license that authorizes well drilling and shall require continuing education specific to heat exchange drilling for individuals seeking to retain a driller license that authorizes heat exchange drilling.
Effective date text
2. Apply for license renewal and pay the required license fees under par. (c) annually on or before January 1.
280.15(2m)(c)
(c)
Fees. The license fees required for license application or annual renewal are as follows:
280.15(2m)(d)
(d)
Late fees. An individual who files an application for license renewal or pays the required annual fees after January 1 shall pay a late penalty of $15.
280.15(2m)(e)
(e)
Prerequisites for pump installer license. The department may not issue a pump installer license unless the applicant demonstrates competency in pump installing by passing an examination administered by the department.
280.15(2m)(f)1m.1m. The department may not issue a driller license that authorizes well drilling unless all of the following apply:
280.15(2m)(f)1m.a.
a. The applicant demonstrates competency in well drilling by passing an examination administered by the department.
280.15(2m)(f)1m.b.
b. Except as provided in
par. (g), the applicant has been a registered drilling rig operator for at least 2 years within the 5 years before applying, has complied with training and continuing education requirements under
sub. (3g), and has the well drilling experience required by the department by rule.
280.15(2m)(f)2m.
2m. The department may not issue a driller license that authorizes heat exchange drilling unless all of the following apply:
280.15(2m)(f)2m.a.
a. The applicant demonstrates competency in heat exchange drilling by passing an examination administered by the department.
280.15(2m)(f)2m.b.
b. Except as provided in
par. (g), the applicant has been a registered drilling rig operator for at least 2 years within the 5 years before applying, has complied with training and continuing education requirements under
sub. (3g), and has the heat exchange drilling experience required by the department by rule.
280.15(2m)(g)1.1. The department may issue a driller license to an applicant who does not comply with
par. (f) 1m. b. or
2m. b. if the applicant complies with
par. (f) 1m. a. or
2m. a. and holds a driller license in good standing from another state and the department determines that the other state has laws and rules governing well drilling and heat exchange drilling and licensing of well drillers and heat exchange drillers that are substantially similar to this state's laws and rules.
280.15(2m)(g)2.
2. The department shall establish alternative requirements to
par. (f) 1m. b. for applicants who have gained well drilling experience before June 1, 2008. The department shall establish alternative requirements to
par. (f) 2m. b. for applicants who have gained heat exchange drilling experience before April 1, 2015.
280.15(3g)
(3g) Drilling rig operator registration. 280.15(3g)(a)(a)
Application. An individual who seeks registration as a drilling rig operator shall apply to the department on a form prepared by the department. The individual shall include a fee of $25, except that an individual who is eligible for the veterans fee waiver program under
s. 45.44 is not required to pay the fee.
280.15(3g)(b)
(b)
Renewal. In order to retain registration as a drilling rig operator an individual shall do all of the following:
280.15(3g)(b)2.
2. Comply with requirements for continuing education promulgated by the department by rule. The department shall require continuing education specific to well drilling for individuals seeking to retain a drilling rig operator's registration that authorizes well drilling and shall require continuing education specific to heat exchange drilling for individuals seeking to retain a drilling rig operator's registration that authorizes heat exchange drilling.
280.15(3g)(b)3.
3. Apply for registration renewal and pay a fee of $25 annually on or before January 1.
280.15(3g)(d)
(d)
Late fees. An individual who files an application for registration renewal or who pays the required annual fee after January 1 shall pay a late penalty of $15.
280.15(3r)(a)(a)
Requirement. Except as provided in
par. (b) and
sub. (4), an individual who is not a licensed driller or a registered drilling rig operator may engage in drilling a well or heat exchange drillhole only if the individual is under the supervision of a licensed driller or a registered drilling rig operator who is on the site of the drilling.
280.15(3r)(b)
(b)
Exception. Paragraph (a) does not apply to an individual performing well drilling of a public well for a local governmental unit if the individual applies for registration under
sub. (3g) no later than 14 days after the day on which the individual begins to perform the well drilling.
280.15(4)
(4) Work on own real estate. No individual is required to obtain a registration or license under this section for well drilling or heat exchange drilling on real estate owned or leased by that individual, but the well or heat exchange drillhole and the work done on the well or heat exchange drillhole shall comply with the law and the rules promulgated by the department.
280.16
280.16
Prohibition on use of certain devices in wells. 280.16(1)(1) In this section, “pitless adapter" means a device that attaches a well casing pipe to an underground pipe that conveys water from the well.
280.16(2)
(2) No person may install a pitless adapter that extends into the inside of a well casing pipe except if the sand screen is permanently attached to the bottom of a well casing pipe that is constructed of polyvinyl chloride. Only the following may install pitless adapters:
280.16(2)(b)
(b) An employee of a licensed pump installer or a registered pump installing business.
280.16(2)(c)
(c) A welder under contract with a licensed pump installer or registered pump installing business.
280.16 History
History: 1997 a. 122;
2005 a. 360.
280.17
280.17
Exceptions. The provisions of this chapter shall not apply to the construction of wells where the water is used only for stock watering and other similar domestic purposes and is not used for human consumption.
280.17 History
History: 1995 a. 227 s.
941; Stats. 1995 s. 280.17.
280.19
280.19
Registration exceptions. No registration or license to engage in the well drilling or pump installing industry is required of competent sanitary engineers or of superintendents of waterworks systems in the preparations of plans and specifications or in supervising the installation of wells and water systems for the obtaining of supplies of groundwater, but the plans and specifications shall conform to all requirements established by the department.
280.19 History
History: 1995 a. 227 s.
942; Stats. 1995 s. 280.19;
2005 a. 360.
280.21
280.21
Local authority. 280.21(1)(1)
Ordinances. The department may authorize counties to adopt ordinances under
s. 59.70 (6) (b) and
(c), relating to the enforcement of this chapter and rules of the department under this chapter. The department shall establish by rule standards for approval of ordinances and enforcement programs. Among other things, the rules may:
280.21(1)(a)
(a) Include personnel, training, reporting and other requirements;
280.21(1)(b)
(b) Establish separate standards for different categories of wells and enforcement actions;
280.21(1)(c)
(c) Require approval by the department before a variance may be granted; and
280.21(1)(d)
(d) Establish exemptions from licensing or alternate licensing requirements for replacement of a pump in an emergency.
280.21(2)
(2) Private wells. The department shall define by rule “private well" and “private wells" as used in this section and
s. 59.70 (6). The definition may not include wells for which plans and specifications must be submitted to the department for approval prior to construction or installation.
280.21(3)
(3) Training. The department shall provide training and technical assistance to local government employees and agents for implementation of this section and
s. 59.70 (6). The department may charge each county which receives training and technical assistance a fee for those services. Fees may not exceed the department's actual costs of providing the services.
280.21(4)
(4) Review and audit. The department shall review and audit periodically each ordinance and program adopted under
s. 59.70 (6) to ascertain compliance with this chapter and with rules of the department under this chapter. If an ordinance or related program is not in compliance, the department may revoke the authority of the county to enforce the ordinance. Revocation may be made only pursuant to written department findings made after a public hearing held in the county upon 30 days advance notice to the clerk of the local unit of government.
280.21(5)
(5) Concurrent enforcement. The department may enforce this chapter and rules of the department under this chapter that are covered by an ordinance adopted under
s. 59.70 (6), in the county with the ordinance, if the department is engaged in audit or review activities, if there is reasonable cause to believe that the ordinance or related enforcement program of the county is not in compliance under
sub. (4) or if the department determines that there are special circumstances requiring concurrent enforcement. The department shall continue to enforce this chapter and rules of the department under this chapter that are not covered by an ordinance in counties with ordinances adopted under
s. 59.70 (6).
280.21 History
History: 1983 a. 410;
1995 a. 201;
1995 a. 227 s.
944; Stats. 1995 s. 280.21.
280.25
280.25
Report on aquifer recovery system. 280.25(2)
(2) The operator of a municipal water system that uses an aquifer storage and recovery system shall submit a report to the department, no later than the first day of the 60th month after beginning to operate the aquifer storage and recovery system, describing the experience that the operator has had with using the aquifer storage and recovery system.
280.25 History
History: 2001 a. 109.
280.30
280.30
Well and heat exchange drillhole abandonment; property transfer inspections.
280.30(1)(1)
Definition. Notwithstanding
s. 280.01 (6), in this section, “water supply well" means an excavation or opening into the ground made by digging, boring, drilling, or other method that supplies water for any purpose.
280.30(2)
(2) Well abandonment. An individual may not fill or seal a water supply well unless one of the following applies:
280.30(2)(a)
(a) The individual is a licensed driller who is authorized by the department to engage in well drilling or licensed pump installer.
280.30(2)(b)
(b) The individual is under the supervision of a licensed driller who is authorized by the department to engage in well drilling or licensed pump installer or the individual is under the supervision of a water system operator certified under
s. 281.17 (3) and the well is within the service area of the local governmental water system for which the certified operator works. The licensed or certified individual is not required to be present during the filling or sealing.
280.30(2)(c)
(c) The individual is a water system operator certified under
s. 281.17 (3) and the well is within the service area of the local governmental water system for which the individual works.
280.30(2m)
(2m) Heat exchange drillhole abandonment. An individual may not fill or seal a heat exchange drillhole unless the individual is a licensed driller who is authorized by the department to engage in heat exchange drilling.
