Register January 2006 No. 601
Chapter DFI-SB 13
LOANS
DFI-SB 13.01   Loan policies.
DFI-SB 13.02   Mortgage loans.
DFI-SB 13.03   Approval of indexes used for variable rate loans.
DFI-SB 13.04   Consumer loans.
DFI-SB 13.05   Commercial loans.
Ch. DFI-SB 13 Note Note: Chapter SB 13 was renumbered ch. DFI-SB 13 under s. 13.93 (2m) (b) 1., Stats., and corrections made under s. 13.93 (2m) (b) 6. and 7., Stats., Register, November, 1997, No. 503.
DFI-SB 13.01 DFI-SB 13.01Loan policies. Each savings bank's board of directors shall adopt written policies to direct the savings bank's mortgage, consumer and commercial loan activities.
DFI-SB 13.01 Note Note: This section interprets or implements s. 214.715, Stats.
DFI-SB 13.01 History History: Cr. Register, February, 1994, No. 458, eff. 3-1-94.
DFI-SB 13.02 DFI-SB 13.02Mortgage loans.
DFI-SB 13.02(1) (1) Authority. A savings bank may make, invest in, sell, purchase, participate or otherwise deal in mortgage loans or interests in mortgage loans without geographic restriction, including loans made on the security of residential, commercial or cooperative units.
DFI-SB 13.02(2) (2)Appraisal. New mortgage loans originated shall be supported by a reasonably current appraisal or other documentation approved by the division containing a level of information commensurate to the size and nature of the real estate appraised.
DFI-SB 13.02(3) (3)Maximum loan to value ratios.
DFI-SB 13.02(3)(a)(a) Definition. In this subsection, “first lien" includes any mortgage which has priority over all other liens or encumbrances.
DFI-SB 13.02(3)(b) (b) Limitations.
DFI-SB 13.02(3)(b)1.1. `First lien mortgages.' Except as provided in par. (d), a savings bank may not make a loan secured by a first lien mortgage in an amount in excess of 90% of the value of the real estate security.
DFI-SB 13.02(3)(b)2. 2. `Junior liens.' A savings bank may not make a loan secured by a mortgage other than a first lien mortgage in an amount in excess of:
DFI-SB 13.02(3)(b)2.a. a. The maximum amount the savings bank is authorized to lend on the security of a first lien on the mortgaged property; minus
DFI-SB 13.02(3)(b)2.b. b. The face amount of all other outstanding loans secured by the mortgaged property and any other unsatisfied liens against that property.
DFI-SB 13.02(3)(c) (c) Calculation. In calculating the loan to value ratio under this subsection, the value of the real estate security is limited to that attributable to the real estate if used in a manner consistent with its current or intended use.
DFI-SB 13.02(3)(d) (d) Exceptions: Loans to 100% of value. A savings bank may make a loan in an amount up to 100% of the value of the real estate security if:
DFI-SB 13.02(3)(d)1. 1. The part of the loan that exceeds 90% of the value of the property is insured or guaranteed by a mortgage insurance company that the federal home loan mortgage corporation has determined to be a “qualified private insurer";
DFI-SB 13.02(3)(d)2. 2. The loan or the part of the loan that exceeds 90% of the value of the property is insured or guaranteed by an agency or instrumentality of a state or the federal government whose full faith and credit is pledged to support the insurance or guarantee;
DFI-SB 13.02(3)(d)3. 3. Made in conjunction with a governmental subsidy, insurance or guarantee program approved by the division;
DFI-SB 13.02(3)(d)4. 4. The loan is fully secured by the cash surrender value of an insurance policy on the life of any person responsible for the loans payment; negotiable securities, the principal and interest of which is guaranteed by the U.S. government; bonds, notes or other evidences of indebtedness, constituting the general obligation of a municipality; or deposit accounts in an insured institution;
DFI-SB 13.02(3)(d)5. 5. The loan is to facilitate the sale of a savings bank's real estate owned or real estate in judgment; or
DFI-SB 13.02(3)(d)6. 6. The loan is to meet the objectives of the federal community reinvestment act of 1977 (12 USC 2901 ff.) with the prior written approval of the division.
DFI-SB 13.02(4) (4)Term.
DFI-SB 13.02(4)(a)(a) Length. The term of a mortgage loan may not exceed 30 years or such other term, not to exceed 40 years, which is permitted for any other lender authorized to make first lien real estate loans in this state, commencing with the latest of:
DFI-SB 13.02(4)(a)1. 1. The date of closing;
DFI-SB 13.02(4)(a)2. 2. The date of the first contractual monthly principal and interest payment;
DFI-SB 13.02(4)(a)3. 3. The date of any additional advance;
DFI-SB 13.02(4)(a)4. 4. The date of any properly executed loan modification agreement; or
DFI-SB 13.02(4)(a)5. 5. The date of any interest rate increase under the terms of a note permitting or requiring changes in the interest rate.
DFI-SB 13.02(4)(b) (b) Amortization. The rate of amortization on a mortgage loan may vary during the term of the loan, may not be negative, and may result in a lump sum payable at maturity.
DFI-SB 13.02(5) (5)Development loans.
DFI-SB 13.02(5)(a)(a) Maximum term. The term of a development loan may not exceed 5 years, but may be extended for periods of one year or less if:
DFI-SB 13.02(5)(a)1. 1. The borrower makes a request to the savings bank for an extension;
DFI-SB 13.02(5)(a)2. 2. All taxes on the property and contractual loan payments are current; and
DFI-SB 13.02(5)(a)3. 3. The borrower and the savings bank execute a written extension agreement.
DFI-SB 13.02(5)(b) (b) Appraisals and other documentation. Before making a development loan a savings bank shall obtain:
DFI-SB 13.02(5)(b)1. 1. A feasibility study which contains a current appraisal.
DFI-SB 13.02(5)(b)2. 2. A statement from the borrower indicating the borrower's intended use of the property. If further improvements must be made to the land to make it suitable for the construction of a dwelling unit and loan proceeds are expected to be used in that development, the statement shall include a development schedule and the estimated cost of those improvements.
DFI-SB 13.02(5)(c) (c) Release schedule. When a development loan is secured by more than one lot:
DFI-SB 13.02(5)(c)1. 1. The savings bank and the borrower shall enter into a written agreement governing the release of individual lots from the savings bank's security interest.
DFI-SB 13.02(5)(c)2. 2. No portion of the qualifying real estate security may be released unless:
DFI-SB 13.02(5)(c)2.a. a. The savings bank has obtained an appraisal that individually sets forth the value of each developed lot and of any qualifying security remaining to be developed; and
DFI-SB 13.02(5)(c)2.b. b. The ratio of the unpaid balance of the savings bank's loan to the value 56 of the remaining real estate security will not exceed the applicable maximum loan to value ratio under sub. (3).
DFI-SB 13.02 Note Note: This section interprets or implements ss. 138.056, 214.03, 214.48 and 214.485, Stats.
DFI-SB 13.02 History History: Cr. Register, February, 1994, No. 458, eff. 3-1-94.
DFI-SB 13.03 DFI-SB 13.03Approval of indexes used for variable rate loans.
DFI-SB 13.03(1)(1) Except as provided in sub. (2), each index used by a savings bank for a variable rate loan which requires the approval of the division under s. 138.056 (1) (a) 4. a., Stats., must be approved in writing.
DFI-SB 13.03 Note Note: Section 138.056 (1) (a) 4. a., Stats., was repealed by 2003 Wis. Act 33.
DFI-SB 13.03(2) (2) Under s. 138.056 (1) (a) 4. a., Stats., the following indexes are determined to be readily verifiable by borrowers and beyond the control of an individual lender and are hereby approved for use in variable rate loans under s. 138.056, Stats.:
DFI-SB 13.03 Note Note: Section 138.056 (1) (a) 4. a., Stats., was repealed by 2003 Wis. Act 33.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.