218.0116(6)
(6) If a licensee is a firm, corporation or limited liability company, it shall be sufficient cause for the denial, suspension or revocation of a license that any officer, director, trustee or manager of the firm, corporation or limited liability company, or any member in case of a partnership, has been guilty of any act or omission which would be cause for refusing, suspending or revoking a license to that party as an individual. Each licensee shall be responsible for the acts of any or all of his or her salespersons while acting as his or her agent, if the licensee approved of or had knowledge of the acts or other similar acts and after approving of or obtaining knowledge of the acts retained the benefit, proceeds, profits or advantages accruing from the acts or otherwise ratified the acts.
218.0116(7)(a)1.1. A manufacturer, importer or distributor who seeks to enter into a franchise agreement establishing or relocating a motor vehicle dealership, parts outlet or service outlet within the relevant market area of an existing enfranchised dealer of the line make of motor vehicle shall first notify, in writing, the department of transportation and that existing enfranchised dealer of its intention to establish or relocate a dealership or outlet. Within 30 days of receiving the notice or within 30 days after the end of any appeal procedure provided by the manufacturer, importer or distributor, whichever is later, any existing enfranchised dealer of the same line make to whom the manufacturer, importer or distributor is required to give notice under this paragraph may file with the department of transportation and the division of hearings and appeals a complaint protesting the proposed establishment or relocation of the dealership or outlet within the relevant market area of the existing enfranchised dealer.
218.0116(7)(a)2.
2. If a complaint is filed under
subd. 1., the department of transportation shall inform the manufacturer, importer or distributor that a timely complaint has been filed, that a hearing is required, and that the proposed franchise agreement may not be entered into until the division of hearings and appeals has held a hearing, nor thereafter, if the division of hearings and appeals determines that there is good cause for not permitting the proposed establishment or relocation of the dealership or outlet. In the event of multiple complaints, hearings shall be consolidated to expedite the disposition of the issue.
218.0116(7)(b)
(b) In determining whether good cause exists for not permitting the proposed establishment or relocation of a dealership or outlet, the division of hearings and appeals shall take into consideration the existing circumstances, including, but not limited to:
218.0116(7)(b)1.
1. The amount of business transacted by existing enfranchised dealers of the line make of motor vehicle when compared with the amount of business available to them.
218.0116(7)(b)2.
2. The permanency of the investment necessarily made and the obligations incurred by existing enfranchised dealers in the performance of their franchise agreements.
218.0116(7)(b)3.
3. The effect on the retail motor vehicle business in the relevant market area.
218.0116(7)(b)4.
4. Whether it is injurious to the public welfare for the proposed dealership or outlet to be established or relocated.
218.0116(7)(b)5.
5. Whether the establishment or relocation of the proposed dealership or outlet would increase competition and therefore be in the public interest.
218.0116(7)(b)6.
6. Whether the existing enfranchised dealers of the line make of motor vehicle are providing adequate consumer care for the motor vehicles of that line make, including the adequacy of motor vehicle service facilities, equipment, supply of parts and qualified personnel.
218.0116(7)(b)7.
7. Whether the existing enfranchised dealers of the line make of motor vehicle are receiving vehicles and parts in quantities promised by the manufacturer, factory branch or distributor and on which promised quantities existing enfranchised dealers based their investment and scope of operations.
218.0116(7)(b)8.
8. The effect the denial of the proposed establishment or relocation would have on the license applicant, dealer or outlet operator who is seeking to establish or relocate a dealership or outlet.
218.0116(7)(c)
(c) The decision of the division of hearings and appeals shall be in writing and shall contain findings of fact and a determination of whether there is good cause for not permitting the proposed establishment or relocation of the dealership or outlet. The division of hearings and appeals shall deliver copies of the decision to the parties personally or by registered mail. The decision is final upon its delivery or mailing and no reconsideration or rehearing by the division of hearings and appeals is permitted.
218.0116(7)(d)1d.
1d. "Closed" means the effective date of the termination or expiration of a dealership's or outlet's license or franchise, whichever is earlier.
218.0116(7)(d)1h.
1h. The reopening or replacement of a dealership or outlet that has been closed for less than 2 years, at the original location or within 2 miles of the original location by the closest highway route, is not the establishment of a motor vehicle dealership or outlet, unless the location is within 4 miles, by the closest highway route, of another franchised dealer of the same line make and is closer to that dealer than the closed dealership or outlet.
218.0116(7)(d)1m.
1m. The reopening or replacement of a dealership or outlet that has been closed for less than 2 years at a location other than the original location and other than a location within 2 miles of the original location by the closest highway route, but within the area of sales responsibility that had been assigned to the closed dealership or outlet by the manufacturer, importer or distributor is not the establishment of a motor vehicle dealership or outlet, unless the new location is within 6 miles, by the closest highway route, of another franchised dealer of the same line make and is closer to that dealer than the closed dealership or outlet.
218.0116(7)(d)1q.
1q. The reopening or replacement of a dealership or outlet that has been closed for 2 or more years or that is at a location outside of the area of sales responsibility that had been assigned to the closed dealership or outlet by the manufacturer, importer or distributor is the establishment of a dealership or outlet.
218.0116(7)(d)2.
2. The relocation of a dealership or outlet to a location within 2 miles of the existing location by the closest highway route and within the existing area of sales responsibility assigned to that dealership or outlet by the manufacturer, importer or distributor is not the relocation of a dealership or outlet, unless the location is within 4 miles, by the closest highway route, of another franchised dealer of the same line make and is closer to that dealer than the existing location. The relocation of a dealership or outlet to a location other than a location within 2 miles of the existing location, but within the existing area of sales responsibility assigned to that dealership or outlet by the manufacturer, importer or distributor is not the relocation of a dealership or outlet, unless the relocation site is within 6 miles, by the closest highway route, of the location of another enfranchised dealer of the same line make and is closer to that dealer than the existing location. The relocation of a dealership or outlet to a location outside the area of sales responsibility assigned to the dealership or outlet by the manufacturer is the relocation of a dealership or outlet.
218.0116(7)(d)3.
3. The establishment or relocation of a service or parts outlet requires that notice be given under
par. (a) to existing enfranchised dealers who are otherwise entitled to receive notice under
par. (a) and who are authorized to perform work to rectify product or warranty defects or delivery and preparation obligations on the same line make as the proposed service outlet or to use a trade name, trademark or service mark that is also proposed to be used by the proposed service or parts outlet, except that the establishment or relocation of a service or parts outlet that is owned and operated by a motor vehicle dealership enfranchised by the manufacturer, importer or distributor requires that notice be given only to existing dealers who are otherwise entitled to receive notice under
par. (a) and who hold a franchise to sell the same line make as the dealership that will own and operate the proposed service or parts outlet.
218.0116(7)(d)4.
4. A manufacturer's, importer's or distributor's authorization of a fleet owner to perform warranty or delivery and preparation work only on the fleet owner's own vehicles is not the establishment of a service outlet. In this subdivision:
218.0116(7)(d)4.a.
a. "Fleet owner" means a person who owns for its own use or for the use of others 10 or more motor vehicles of the current or preceding model year manufactured or sold by the manufacturer, importer or distributor who is authorizing the warranty work to be performed.
218.0116(7)(d)4.b.
b. "Fleet owner" does not include persons engaged in the business of leasing motor vehicles to individual consumers.
218.0116(7)(d)5.
5. The establishment or relocation of a motor vehicle dealership with respect to used motor vehicles under an agreement between the dealer and a manufacturer, importer or distributor is the establishment or relocation of a motor vehicle dealership.
218.0116(8)(a)(a) A manufacturer or distributor may not modify a motor vehicle dealer agreement during the term of the agreement or upon its renewal if the modification substantially and adversely affects the motor vehicle dealer's rights, obligations, investment or return on investment without giving 60 days written notice of the proposed modification to the motor vehicle dealer unless the modification is required by law, court order or the licensor. Within the 60-day notice period the motor vehicle dealer may file with the department of transportation and the division of hearings and appeals and serve upon the respondent a complaint for a determination of whether there is good cause for permitting the proposed modification. The division of hearings and appeals shall promptly schedule a hearing and decide the matter. Multiple complaints pertaining to the same proposed modification shall be consolidated for hearing. The proposed modification may not take effect pending the determination of the matter.
218.0116(8)(b)
(b) In making a determination of whether there is good cause for permitting a proposed modification, the division of hearings and appeals may consider any relevant factor including:
218.0116(8)(b)2.
2. Whether the proposed modification is applied to or affects all motor vehicle dealers in a nondiscriminating manner.
218.0116(8)(b)3.
3. The degree to which the proposed modification will have a substantial and adverse effect upon the motor vehicle dealer's investment or return on investment.
218.0116(8)(b)4.
4. Whether the proposed modification is in the public interest.
218.0116(8)(b)5.
5. The degree to which the proposed modification is necessary to the orderly and profitable distribution of products by the respondent.
218.0116(8)(b)6.
6. Whether the proposed modification is offset by other modifications beneficial to the motor vehicle dealer.
218.0116(8)(c)
(c) The decision of the division of hearings and appeals shall be in writing and shall contain findings of fact and a determination of whether there is good cause for permitting the proposed modification. The division of hearings and appeals shall deliver copies of the decision to the parties personally or by registered mail. The decision is final upon its delivery or mailing and no reconsideration or rehearing by the division of hearings and appeals is permitted.
218.0116(9)
(9) Any person in interest aggrieved by a decision of the division of hearings and appeals or an order of the division of banking may have a review of the decision as provided in
ch. 227.
218.0116(10)
(10) In addition to the licensor's authority to deny, suspend or revoke a license under
ss. 218.0101 to
218.0163, the division of banking, after public hearing, may issue a special order enjoining any licensee from engaging in any act or practice which is determined by the division of banking to be in violation of any provision of
sub. (1), and the division of hearings and appeals may be petitioned to issue such a special order after notice and hearing thereon.
218.0116 History
History: 1999 a. 31 ss.
123 to
187,
284 to
286;
1999 a. 186.
218.0116 Annotation
"Wilful" under s. 218.01 (3) (a) 6. [now sub. (1) (cm)] includes both non-accidental and fraudulent acts. The state need not prove intent to deceive the buyer under s. 218.01 (3) (a) 18 [now sub. (1) (im) 2.]. Dept. of Transp. v. Transp. Comm.
105 Wis. 2d 678,
315 N.W.2d 371 (Ct. App. 1981), aff'd
111 Wis. 2d 80,
330 N.W.2d 159 (1983).
218.0116 Annotation
Under s. 218.01 (3) (b) [now sub. (2)] the commissioner may conduct a de novo review of department's decision and may substitute own judgment for that of department. DOT v. Office of Com'r of Transp.
159 Wis. 2d 271,
463 N.W.2d 870 (Ct. App. 1990).
218.0116 Annotation
Section 218.01 (3) (a) 11. [now sub. (1) (f)] is applicable to manufacturers. Bob Willow Motors, Inc. v. General Motors Corp.
872 F.2d 788 (1989).
218.0116 Annotation
An initial determination by the division is required under s. 218.01(5) (a) [now 218.0152 (1)], but no such requirement is imposed on claims under s. 218.01 (3) (a) 11. [now sub. (1) (f)]. Mossner Porsche Audi, Inc. v. Volkswagenwerk, A. G.
397 F. Supp. 71.
218.0119
218.0119
Changes in places of business to be reported. 218.0119(1)(1) Before changing the location of a place of business or opening a new place of business in a municipality in which authorized to do business, a licensed dealer, distributor, or manufacturer shall apply to the department of transportation for an amended license. The department of transportation shall issue such license without charge.
218.0119(2)
(2) Whenever a licensed dealer, distributor, manufacturer or transporter opens a new place of business, the licensee shall promptly report that fact, including the address of the new place of business, to the department of transportation.
218.0119(3)
(3) Whenever a licensed dealer, distributor or manufacturer discontinues or disposes of his or her business, that dealer, distributor or manufacturer shall promptly report that fact to the department of transportation and return the license and registration plates issued. Whenever a licensed dealer, distributor or manufacturer discontinues business due to license suspension or revocation, that dealer, distributor or manufacturer shall surrender the licenses and registration plates to the department of transportation for the suspension or revocation period.
218.0119(4)
(4) Any dealer, distributor, manufacturer or transporter who fails to comply with the requirements of this section may be fined not more than $200 or imprisoned for not more than 6 months or both.
218.0119 History
History: 1999 a. 31 ss.
105 to
109.
218.0121(1m)(a)
(a) "Agent" means a person who is employed by or affiliated with a factory or who directly or through an intermediary is controlled by or under common control of a factory.
218.0121(1m)(b)
(b) "Control" means the possession, direct or indirect, of the power to direct or cause the direction of the management or policies of a person, whether through the ownership of voting securities, by contract or otherwise. "Control" does not include the relationship between a factory and a dealership under a basic agreement filed under
s. 218.0114 (7) (a) 1.
218.0121(1m)(c)
(c) "Dealer operator" means an individual who is vested with the power and authority to operate a dealership.
218.0121(1m)(e)
(e) "Factory" means a manufacturer, distributor or importer, or an agent of a manufacturer, distributor or importer.
218.0121(1m)(f)
(f) "Operate" means to directly or indirectly manage a dealership.
218.0121(1m)(g)
(g) "Ownership interest" means the beneficial ownership of one percent or more of any class of equity interest in a dealership, whether the interest is that of a shareholder, partner, limited liability company member or otherwise. To "hold" an ownership interest means to have possession of, title to or control of the ownership interest, whether directly or indirectly through a fiduciary or an agent.
218.0121(2m)
(2m) A factory shall not, directly or indirectly, hold an ownership interest in or operate or control a motor vehicle dealership in this state.
218.0121(3m)
(3m) This section does not prohibit any of the following:
218.0121(3m)(a)
(a) A factory from holding an ownership interest in or operating a dealership for a temporary period, not to exceed one year, during the transition from one owner or dealer operator to another.
218.0121(3m)(b)
(b) A factory from holding an ownership interest in a dealership, if all of the following apply:
218.0121(3m)(b)1.
1. The dealer operator of the dealership is an individual who is not an agent of the factory.
218.0121(3m)(b)2.
2. The dealer operator of the dealership is unable to acquire full ownership of the dealership with his or her own assets or in conjunction with financial investments and loans from investors or lenders other than the factory holding an ownership interest in the dealership.
218.0121(3m)(b)3.
3. The dealer operator of the dealership holds not less than 15 percent of the total ownership interests in the dealership within one year from the date that the factory initially acquires any ownership interest in the dealership.
218.0121(3m)(b)4.
4. There is a bona fide written agreement in effect between the factory and the dealer operator of the dealership under which the dealer operator will acquire all of the ownership interest in the dealership held by the factory on reasonable terms specified in the agreement.
218.0121(3m)(b)5.
5. The written agreement described in
subd. 4. provides that the dealer operator will make reasonable progress toward acquiring all of the ownership interest in the dealership, and the dealer is making reasonable progress toward acquiring all of the ownership interest in the dealership.
218.0121(3m)(b)6.
6. Not more than eight years have elapsed since the factory initially acquired its ownership interest in the dealership, unless the department, upon petition by the dealer operator, determines that there is good cause to allow the dealer operator a longer period to complete his or her acquisition of all of the ownership interest in the dealership held by the factory and the longer period determined by the department has not yet elapsed.
218.0121(3m)(c)
(c) The ownership, operation or control of a dealership by a factory that does not meet the conditions under
par. (a) or
(b), if the division of hearings and appeals determines, after a hearing on the matter at the request of any party, that there is no prospective independent dealer available to own and operate the dealership in a manner consistent with the public interest and that meets the reasonable standard and uniformly applied qualifications of the factory.
218.0121(3m)(d)
(d) The holding or acquisition, solely for investment purposes, of an ownership interest in a publicly traded corporation by an employee benefit plan that is sponsored by a factory.
218.0121 History
History: 1999 a. 31 s.
110,
186.
218.0122
218.0122
Damages to delivered vehicles. 218.0122(1)
(1) A manufacturer, importer or distributor shall disclose in writing to a motor vehicle dealer, at or before delivery to the dealer, any damage and repair to a new motor vehicle occurring after the manufacturing process is complete but before delivery to the dealer, if the cost of the repair exceeds 6% of the manufacturer's suggested retail price, as measured by retail repair costs. Replacement of glass, tires, bumpers, fenders, moldings, audio equipment, instrument panels, hoods and deck lids with identical manufacturer's original equipment is not considered damage and repair under this subsection. If a manufacturer, importer or distributor fails to make a disclosure of damage and repair under this subsection, it shall be liable to the dealer for any liability imposed on the dealer for a failure on the part of the dealer to disclose that damage and repair.
218.0122(2)
(2) If the cost of repairing damage to a new motor vehicle that occurs before delivery to the dealer's location exceeds 6% of the manufacturer's suggested retail price, as measured by retail repair costs, the dealer may reject or, if title has passed to the dealer, require the manufacturer, importer or distributor who delivered the vehicle to repurchase the vehicle within 10 business days after delivery, unless the damage occurred during shipment and the method of transportation, carrier or transporter of the motor vehicle was designated by the motor vehicle dealer. Upon repurchase, the manufacturer, importer or distributor shall be subrogated to all of the dealer's rights against the carrier or transporter of the motor vehicle regarding damage. The cost of repairing glass, tires, bumpers, moldings and audio equipment with identical manufacturer's original equipment shall not be included in determining the cost of repairing damage under this subsection.
218.0122(3)
(3) This section does not apply to motorcycles that are delivered in a crated, disassembled condition to the dealer or the dealer's agent.
218.0122 History
History: 1999 a. 31 s.
111.
218.0123
218.0123
Vehicle allocations. No manufacturer, importer or distributor shall adopt, change, establish or implement a plan or system for the allocation, scheduling or delivery of new motor vehicles, parts or accessories to its motor vehicle dealers that is not fair, reasonable and equitable or modify an existing plan or system so as to cause the plan or system to be unreasonable, unfair or inequitable. Upon the request of any dealer franchised by it, a manufacturer, importer or distributor shall disclose in writing to the dealer the basis upon which new motor vehicles, parts and accessories are allocated, scheduled and delivered among the manufacturer's, importer's or distributor's dealers of the same line make.
218.0123 History
History: 1999 a. 31 s.
112.
218.0124
218.0124
Performance standards. Any performance standard or program for measuring dealership performance that may have a material effect on a dealer, and the application of any such standard or program by a manufacturer, importer or distributor, shall be fair, reasonable and equitable. Upon the request of any dealer, a manufacturer, importer or distributor shall disclose in writing to the dealer a description of how a performance standard or program is designed and all relevant information used in the application of the performance standard or program to that dealer.
218.0124 History
History: 1999 a. 31 s.
113.
218.0125
218.0125
Warranty reimbursement. 218.0125(1)
(1) In this section, "dealer cost" means the wholesale cost for a part as listed in the manufacturer's, importer's or distributor's current price schedules or, if the part is not so listed, the dealer's original invoice cost for the part.
218.0125(2)
(2) A manufacturer, importer or distributor shall, for the protection of the buying public, specify the delivery and preparation obligations of its dealers before delivery of new motor vehicles to retail buyers. A copy of the delivery and preparation obligations of its dealers shall be filed with the department of transportation by every licensed motor vehicle manufacturer, importer or distributor and shall constitute the dealer's only responsibility for product liability as between the dealer and the manufacturer, importer or distributor. Any mechanical, body or parts defects arising from any express or implied warranties of the manufacturer, importer or distributor shall constitute the manufacturer's, importer's or distributor's product or warranty liability. The manufacturer, importer or distributor shall reasonably compensate any authorized dealer who performs work to rectify the manufacturer's, importer's or distributor's product or warranty defects or delivery and preparation obligations or who performs any other work required, requested or approved by the manufacturer, importer or distributor or for which the manufacturer, importer or distributor has agreed to pay, including compensation for labor at a labor rate equal to the effective labor rate charged all customers and for parts at an amount not less than the amount the dealer charges its other retail service customers for parts used in performing similar work by the dealer.
218.0125(3)
(3) To be eligible for compensation for parts under
sub. (2), a dealer shall notify the manufacturer, importer or distributor in writing of the amounts that the dealer charges its other retail service customers for parts and request that it be paid for parts in accordance with this section. The notice may be limited to the dealer's average markup over dealer cost that the dealer charges its other retail service customers for parts used to perform similar work. The notice shall be served upon the manufacturer, importer or distributor not less than 30 days before the date on which the dealer requests that the manufacturer, importer or distributor begin paying the dealer for parts at the stated amounts. The manufacturer, importer or distributor shall pay the dealer, as provided in this section, at the amounts stated in the dealer notice for parts used in work performed on and after the beginning date stated in the notice.
218.0125(4)
(4) The manufacturer, importer or distributor may require the dealer, at reasonable intervals, to provide the manufacturer, importer or distributor with documents or information regarding a reasonable number of sales to other retail service customers of parts used by the dealer to perform similar work in order to substantiate that the amounts requested in the dealer's notice are consistent with the amounts that the dealer charges its other retail service customers for parts used by the dealer to perform similar work.
218.0125(5)
(5) A manufacturer, importer or distributor who fails to compensate a dealer for parts at an amount not less than the amount the dealer charges its other retail service customers for parts used to perform similar work shall not be found to have violated this section if the manufacturer, importer or distributor shows that the amount is not reasonably competitive to the amounts charged to retail service customers by other similarly situated franchised motor vehicle dealers in this state for the same parts when used by those dealers to perform similar work.
218.0125(6)
(6) If a manufacturer, importer or distributor furnishes a part to a dealer at no cost for use by the dealer in performing work for which the manufacturer, importer or distributor is required to compensate the dealer under this section, the manufacturer, importer or distributor shall compensate the dealer for the part at an amount not less than the amount the dealer charges its other retail customers for parts when used to perform similar work less the wholesale cost for the furnished part as listed in the manufacturer's current price schedules. A manufacturer, importer or distributor may pay the dealer a reasonable handling fee instead of the compensation otherwise required by this section for special high-performance complete engine assemblies furnished to the dealer at no cost, provided that the manufacturer, importer or distributor excludes special high-performance complete engine assemblies in determining whether the amounts requested in the dealer's notice are consistent with the amounts that the dealer charges its other retail service customers for parts used by the dealer to perform similar work.
218.0125(7)
(7) A claim made by a franchised motor vehicle dealer for compensation under this section shall be either approved or disapproved within 30 days after the claim is submitted to the manufacturer, importer or distributor in the manner and on the forms the manufacturer, importer or distributor reasonably prescribes. An approved claim shall be paid within 30 days after its approval. If a claim is not specifically disapproved in writing or by electronic transmission within 30 days after the date on which the manufacturer, importer or distributor receives it, the claim shall be considered to be approved and payment shall follow within 30 days. A manufacturer, importer or distributor retains the right to audit claims for a period of one year after the date on which the claim is paid and to charge back any amounts paid on claims that are false or unsubstantiated. If there is evidence of fraud, this subsection does not limit the right of the manufacturer to audit for longer periods and charge back for any fraudulent claim, subject to the limitations period under
s. 893.93 (1) (b).
