SPS 305.315(4)(e)7. 7. Marketing and sales topics regarding the provision of accurate and ethical information to the customer.
SPS 305.315(4)(e)8. 8. Project management, personnel management, and scheduling.
SPS 305.315(4)(e)9. 9. Carpentry, concrete, swimming pool installation, damp proofing a basement, excavation, insulation work, masonry work, painting and decorating, roofing, siding and gutters, screen or storm sash installation, tile and marble work, or house wrecking.
SPS 305.315(4)(e)10. 10. Accounting, finance, and taxes.
SPS 305.315(4)(e)11. 11. Communication and customer service.
SPS 305.315(4)(e)12. 12. Environmental or land use analysis.
SPS 305.315(4)(e)13. 13. Zoning and governance policies and procedures.
SPS 305.315(4)(e)14. 14. Mold, lead, asbestos, or other hazardous material mitigation.
SPS 305.315(4)(e)15. 15. Energy codes and energy conservation methods applicable to residential structures.
SPS 305.315(4)(e)16. 16. Other subject matter approved by the department.
SPS 305.315(5) (5)Waiver. A person who holds a certification as a dwelling contractor qualifier may apply to the department for waiver of the continuing education requirements under sub. (3) (b) on the grounds of prolonged illness or disability or similar circumstances. Each application for waiver shall be considered individually on its merits by the department.
SPS 305.315 History History: CR 07-007: cr. Register August 2007 No. 620, eff. 9-1-07; CR 11-020: r. (2) (c) (intro.), 2., renum. (2) (c) 1. to be (2) (c), correction in (2) (a), (b), (3) (a) 2., (b) 1. made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672; CR 14-010: renum. (3) (b) 1., 2. to (3) (b), (5) and am. (b), cr. (3) (c), (d), (4) Register August 2014 No. 704, eff. 9-1-14; correction in (5) (title) made under s. 13.92 (4) (b) 2., Stats., Register August 2014 No. 704, eff. 9-1-14; correction in (5) made under s. 13.92 (4) (b) 7., Stats., Register July 2015 No. 715.
SPS 305.32 SPS 305.32Manufactured home manufacturers.
SPS 305.32(1)(1)General.
SPS 305.32(1)(a)(a) Pursuant to s. 101.95, Stats., no manufacturer of manufactured homes may manufacture, sell or distribute for sale manufactured homes unless the manufacturer holds a license issued by the department as a licensed manufactured home manufacturer.
SPS 305.32(1)(b) (b) A manufactured home manufacturer license shall be required for each manufacturing plant which manufactures homes to be sold or distributed for sale in the state.
SPS 305.32(2) (2)Application for license. A person applying for a manufactured home manufacturer license shall submit all of the following:
SPS 305.32(2)(a) (a) An application in accordance with s. SPS 305.01.
SPS 305.32(2)(b) (b) An application fee and a license fee in accordance with s. SPS 305.02, Table 305.02.
SPS 305.32(3) (3)Qualifications for license. The person applying for a manufactured home manufacturer license shall be the owner of the manufacturing business, a partner in the manufacturing business applying on behalf of the partnership, or the chairman of the board or chief executive officer applying on behalf of the manufacturing corporation.
SPS 305.32(4) (4)Responsibilities.
SPS 305.32(4)(a)(a) A person who holds a manufactured home manufacturer license shall post the license at the plant which manufactures homes to be sold or distributed for sale in the state.
SPS 305.32(4)(b) (b) A person who holds a manufactured home manufacturer license shall comply with the warranty and disclosure responsibilities under s. 101.953, Stats.
SPS 305.32 Note Note: See appendix for a reprint of section 101.953, Stats.
SPS 305.32(5) (5)Renewal.
SPS 305.32(5)(a)(a) A person may renew his or her manufactured home manufacturer license.
SPS 305.32(5)(b) (b) A manufactured home manufacturer license shall be renewed in accordance with s. SPS 305.07.
SPS 305.32 History History: Cr. Register, October, 1996, No. 490, eff. 11-1-96; cr. (3m), Register, March, 1998, No. 507, eff. 4-1-98; am. (1) (a) and (2) (b), Register, April, 2000, No. 532, eff. 5-1-00; CR 03-075: am. Register June 2004 No. 582, eff. 8-1-04; correction in (1) (a) made under s. 13.93 (2m) (b) 7., Stats., Register February 2006 No. 602; CR 06-071: renum. (3m) to be (3m) (a), cr. (3m) (b) Register November 2006 No. 611, eff. 12-1-06; CR 11-020: renum. (3m), (4) to be (4), (5), Register December 2011 No. 672, eff. 1-1-12; correction in (2) (a), (b), (5) (b), as renumbered, made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672.
SPS 305.323 SPS 305.323Manufactured home dealer.
SPS 305.323(1) (1)General. Under s. 101.951 (1), Stats., no person may engage in the business of selling manufactured homes to a consumer or to the retail market unless the person holds a license issued by the department as a licensed manufactured home dealer. A branch license shall also be obtained for each branch operated by the licensed manufactured home dealer to sell homes.
SPS 305.323(2) (2)Application for license. A person applying for a manufactured home dealer license shall submit all of the following:
SPS 305.323(2)(a) (a) An application in accordance with s. SPS 305.01.
SPS 305.323(2)(b) (b) An application fee and a license fee in accordance with s. SPS 305.02, Table 305.02.
SPS 305.323(2)(c) (c) A license fee for each branch in accordance with s. SPS 305.02, Table 305.02.
SPS 305.323(2)(d) (d) One of the following forms of security:
SPS 305.323(2)(d)1. 1. `Surety bond.' A surety bond shall be filed on form SBD-10679 and issued by a bonding company licensed by this state. The surety bond shall be payable for the benefit of any person sustaining a loss because of an act of the licensee constituting grounds for the suspension or revocation of a license under s. 101.951 (6), Stats.
SPS 305.323(2)(d)2. 2. `Financial statement.' A financial statement shall be filed on form SBD-10678 or the equivalent in accordance with generally accepted accounting principles and be dated not more than 90 days prior to the date of application. A small business, as defined in s. 227.114 (1), Stats., that does no interim financial reporting may submit a financial statement from the close of the business's most recent fiscal year. Financial statements anticipating some future event shall not be accepted.
SPS 305.323(3) (3)Qualifications.
SPS 305.323(3)(a)(a) Minimum net worth or bond. The minimum level of net worth or surety bond of an applicant shall be determined in accordance with Table 305.323-1 for a non-broker or Table 305.323-2 for a broker. The department shall deny the license of any applicant who fails to meet the net worth or surety bond criteria specified in the tables. - See PDF for table PDF - See PDF for table PDF
SPS 305.323(3)(b) (b) Person applying. The person applying for a manufactured home dealer license shall be the owner of the business, a partner in the business applying on behalf of a partnership, or the chairperson of the board or chief executive officer applying on behalf of the corporation.
SPS 305.323(4) (4)Responsibilities. A person who holds a manufactured home dealer license shall post the license at the main business office and shall comply with the trade practices, facilities and records requirements specified in subs. (5) to (9).
SPS 305.323(5) (5)Advertising and sales representations.
SPS 305.323(5)(a)(a) Truthful. The use of false, deceptive or misleading advertising or representations by any licensee to induce the purchase of a manufactured home is prohibited.
SPS 305.323(5)(b) (b) Factual. Any licensee, making a statement of fact to the public in an advertisement, written statement or representation concerning the manufactured home offered for sale, the services provided or any other aspects of business operation, shall, upon request of the department, furnish evidence of the validity and accuracy of the statement of fact at the time it was made.
SPS 305.323(5)(c) (c) Disclosures required when advertising price. When the price of a manufactured home is advertised by a licensee, the advertised price shall include all charges that shall be paid by the retail purchaser to acquire ownership of the advertised home with the exception of sales tax, title registration fees, government required permits, and charges from lenders or other entities.
SPS 305.323(5)(d) (d) Name. Advertisements for manufactured home sales shall include the licensed business name.
SPS 305.323(5)(e) (e) New or used. When advertising a manufactured home, a licensee shall state the model year of the home or whether the home is a new manufactured home or a used manufactured home. If the manufactured homes in an advertisement are either all new or all used, one reference in the advertisement designating that they are new or used is sufficient.
SPS 305.323(5)(f) (f) Expiration terms of sales or promotions. Whenever a sale or promotion offering gifts, merchandise, equipment, accessories, service, discounts, price reductions or cash is advertised, the advertisement shall specifically disclose the expiration terms or date of the sale or promotion.
SPS 305.323(5)(g) (g) Relocations. Whenever a licensee advertises a manufactured home on a rental lot site that may have to be moved as a condition of the sale, that fact shall be stated in the advertisement.
SPS 305.323 Note Note: See Department of Agricultural, Trade and Consumer Protection rules under section ATCP 125.02 regarding tie-in sales; separate or discriminatory charges.
SPS 305.323(6) (6)Purchase contract.
SPS 305.323(6)(a)1.1. A licensee shall furnish retail purchasers with a manufactured home purchase contract that clearly states that the retail purchaser is making an offer to purchase a manufactured home. An exact copy of the purchase contract shall be provided to the retail purchaser at the time the retail purchaser signs the offer and again after the offer is accepted by the manufactured home dealer if accepted at a different time than accepted by the retail purchaser. Any changes in the purchase contract after signing by the retail purchaser or subsequent to acceptance by the manufactured home dealer shall be initialed by all the parties on all copies.
SPS 305.323(6)(a)2. 2. A manufactured home purchase contract shall be executed whenever the licensee accepts a down payment, deposit, or title for a trade-in unit from a prospective retail purchaser.
SPS 305.323(6)(b) (b) Contract requirements. A manufactured home purchase contract shall be completed on form SBD-10807.
SPS 305.323(6)(c) (c) Termination of offer to purchase.
SPS 305.323(6)(c)1.1. Unless otherwise specified in the contract, the offer to purchase is automatically voided if the licensee fails to accept or reject the offer by the close of the manufactured home dealer's next business day.
SPS 305.323(6)(c)2. 2. The licensee shall not sell the manufactured home to any other person until the offer is rejected by the licensee or the offer is voided in accordance with this subsection, or the retail purchaser cancels the contract in accordance with par. (d).
SPS 305.323(6)(c)3. 3. Any down payment, deposit or title shall be returned to the prospective retail purchaser within 2 working hours of the time the offer to purchase is rejected by the licensee. If the prospective retail purchaser is not present or available during the 2 hour period, those items shall be returned in person or mailed by the close of the manufactured home dealer's next business day.
SPS 305.323(6)(d) (d) Cancellation of agreements.
SPS 305.323(6)(d)1.1. The purchase contract shall clearly state that cancellation of a manufactured home contract within one business day of acceptance by a manufactured home dealer may subject the retail purchaser to a penalty of up to 1% of the cash price of the manufactured home and that cancellation after the close of the next business day may subject the retail purchaser to a penalty not to exceed the penalty amount specified in the contract. Modification of the purchase contract shall not extend the cancellation period. Documented proof of notification of cancellation is required regardless of the method of notification.
SPS 305.323(6)(d)2. 2. The title and any down payment or deposit which is not retained by the manufactured home dealer as a penalty in accordance with subd. 1. shall be returned to the retail purchaser by the close of the manufactured home dealer's next business day following receipt of the retail purchaser's notice of cancellation.
SPS 305.323(6)(d)3. 3. Whenever a manufactured home is sold away from the licensed place of business, the manufactured home dealer shall furnish the customer with a written notice of the 3-day consumer cancellation rights in accordance with s. 423.202, Stats.
SPS 305.323(6)(e) (e) Price changes. Any increase in price to a retail purchaser after the manufactured home dealer has accepted an offer is prohibited except when the price increase is due to any of the following:
SPS 305.323(6)(e)1. 1. The addition of new equipment required by local, state or federal law.
SPS 305.323(6)(e)2. 2. Local, state or federal tax changes.
SPS 305.323(6)(e)3. 3. The reappraisal of a trade-in unit that has suffered damage or is missing furnishings, appliances or accessories that were part of the trade-in unit at the time the purchase contract was executed. Reappraisal by the licensee shall be limited to an amount equal to the retail repair costs of the damage incurred, or to the value of furnishings, appliances or accessories removed.
SPS 305.323(6)(f) (f) Contract notice. The purchase contract shall include information regarding possible price increases due to any of the items in par. (e) 1. to 3.
SPS 305.323(6)(g) (g) Warranties. Warranties and disclosures shall be provided in accordance with s. 101.953, Stats.
SPS 305.323 Note Note: See appendix for a reprint of section 101.953, Stats.
SPS 305.323(6)(h) (h) Name of prior owner. The purchase contract shall include the name and address of the current titled owner if the manufactured home is consigned to or listed by the licensee. The name and address of the previous owner shall be kept on file at the manufactured home dealer's main business office if the manufactured home is owned and offered for sale by the licensee.
SPS 305.323(6)(i) (i) On-site sales. If the manufactured home is displayed for sale on a rental lot site or if a licensee represents that a manufactured home may occupy a site in a specified manufactured home community, the manufactured home dealer shall do all of the following:
SPS 305.323(6)(i)1. 1. Clearly state on the purchase contract whether or not the manufactured home may have to be moved from the site.
SPS 305.323(6)(i)2. 2. Clearly state on the purchase contract that the contract is voidable by the retail purchaser if the retail purchaser is rejected by, or the purchaser's manufactured home is not permitted in, the manufactured home community.
SPS 305.323(6)(i)3. 3. If the manufactured home may remain on site, inform the prospective retail purchaser in writing prior to the execution of the contract that a copy of the current manufactured home community lease and rules may be obtained from the current manufactured home owner or manufactured home community operator.
SPS 305.323(6)(j) (j) Service fees. A licensee shall not assess a retail purchaser an additional service charge or fee for completing any sales-related home inspection forms that are required by law or rule.
SPS 305.323(6)(k) (k) Waiver. The use of a manufactured home purchase contract that requires the retail purchaser to waive any claims the retail purchaser may have for breach of contract by the licensee is prohibited.
SPS 305.323(7) (7)Consignment and listing agreements.
SPS 305.323(7)(a)(a) Usage and contents.
SPS 305.323(7)(a)1.1. Form SBD-10808 shall be used whenever a manufactured home dealer lists or offers to sell a used manufactured home on consignment.
SPS 305.323(7)(a)2. 2. Form SBD-10807 shall be used whenever a manufactured home dealer sells a listed or consigned used manufactured home.
SPS 305.323(7)(b) (b) On-site sales on rental sites. Manufactured homes selling agreements for units offered for sale on-site on rental sites shall comply with sub. (6) (i).
SPS 305.323(7)(c) (c) Net sales prohibited. Licensees shall not obtain, negotiate, or attempt to negotiate any manufactured home selling agreement providing for a stipulated net price to the owner with the excess over the stipulated net price to be received by the licensee as commission.
SPS 305.323(8) (8)Disclosure of the conditions of the manufactured home.
SPS 305.323(8)(a)(a) Model year designation. Changing the model year of a manufactured home is prohibited. If no model year is designated, the year of manufacture applies.
SPS 305.323(8)(b) (b) New manufactured home disclosure. The licensee shall, on the face of the new manufactured home purchase contract, disclose all manufactured home dealer installed options or accessories and whether or not the options or accessories are warranted.
SPS 305.323(8)(c) (c) Used manufactured home general condition disclosure.
SPS 305.323(8)(c)1.1. Before the execution of a purchase contract for a used manufactured home owned by a licensee, the licensee shall inform a prospective retail purchaser of all significant structural or mechanical defects or damage on form SBD-10809. If the licensee is unable to determine whether specific damage or defects exist, that fact shall be noted on the disclosure form. Disclosure of information shall include that which the licensee discovers as a result of a reasonably competent and diligent inspection which shall consist of, but is not limited to, a walk-around and interior inspection, an under-home inspection, roof inspection and inspection of the appliances. A reasonably competent and diligent inspection is not required to cover every possible technical detail. The licensee is not required to dismantle any part of the manufactured home during the inspection process.
SPS 305.323(8)(c)2. 2. The seller of a listed or consigned used manufactured home shall provide a completed form SBD-10809 to the licensee. The licensee shall provide the completed disclosure statement to the prospective retail purchaser.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.