SB356-AA1,2,76
(b) "Heavily galvanized" means having a zinc coating weighing 230 grams per
7square meter or 0.8 ounces per square foot.
SB356-AA1,2,98
(c) "High tensile" means having a tensile strength of 1,235 to 1,450 mega
9pascals or 179,000 to 210,000 pounds per square inch.
SB356-AA1,2,1110
(d) "Medium tensile" means having a tensile strength of 700 to 850 mega
11pascals or 101,000 to 123,000 pounds per square inch.
SB356-AA1,2,13
12(2) Specifications. Any person who keeps farm-raised deer shall keep the
13farm-raised deer enclosed by a fence that meets all of the following requirements:
SB356-AA1,2,1714
(a) Except for animals of the genus rangifer, the fence is at least 7 feet 10 inches
15high and is a woven wire fence that satisfies sub. (3) or is a high tensile fence that
16satisfies sub. (4). The top 6 inches of the fence may consist of a single strand of smooth
17high tensile wire.
SB356-AA1,2,2018
(b) For animals of the genus rangifer, the fence is at least 5 feet high and is a
19woven wire fence that satisfies sub. (3) or is a high tensile fence that satisfies sub.
20(4).
SB356-AA1,2,2121
(c) If the fence is made with wood posts, all of the following apply:
SB356-AA1,2,2222
1. The posts are at least 12 feet long.
SB356-AA1,2,2423
2. The tops of the line posts are, if rectangular, at least 3.5 inches in the smallest
24dimension or, if round, at least 3.5 inches in diameter.
SB356-AA1,3,2
13. The tops of the corner and gate posts are, if rectangular, at least 5.5 inches
2in the smallest dimension or, if round, at least 5.5 inches in diameter.
SB356-AA1,3,43
4. The wires are held securely to the posts, allowing for free movement of the
4horizontal line wires, using 9-gauge staples of at least 1.5 inch size.
SB356-AA1,3,65
(d) If the fence is made with steel or iron posts, the posts are at least 11 feet long
6or, if the posts are of the type known as T post, the posts are at least 10 feet long.
SB356-AA1,3,87
(e) The wires are installed on the side of the fence toward the farm-raised deer
8except at corners.
SB356-AA1,3,10
9(3) Woven wire fence. A woven wire fence satisfies the requirements of this
10subsection if all of the following apply;
SB356-AA1,3,1111
(a) The wire is 14 1/2 gauge or heavier.
SB356-AA1,3,1212
(b) If the wire is 14 1/2 gauge, the mesh is not larger than 36 square inches.
SB356-AA1,3,1413
(c) If the wire is heavier than 14 1/2 gauge, the mesh is not larger than 48 square
14inches.
SB356-AA1,3,1515
(d) The posts are not more than 12 feet apart.
SB356-AA1,3,17
16(4) High tensile fence. A high tensile fence satisfies the requirements of this
17subsection if all of the following apply:
SB356-AA1,3,1918
(a) The horizontal line wires are not less than 2.5 millimeters in size and are
19heavily galvanized high tensile wire.
SB356-AA1,3,2120
(b) The vertical stay wires are not less than 2.5 millimeters in size and are
21heavily galvanized medium tensile wire.
SB356-AA1,3,2322
(c) The knot wire is not less than 2.24 millimeters in size and is heavily
23galvanized mild steel.
SB356-AA1,3,2424
(d) The distance between vertical stay wires is not more than 6 inches.
SB356-AA1,4,3
1(e) The distance between horizontal line wires is not more than 4 inches in the
2bottom foot of the fence, is not more than 6.5 inches in the next 2 feet of the fence and
3is not more than 8.5 inches in the rest of the fence.
SB356-AA1,4,44
(f) The posts are not more than 20 feet apart.".