236.03 Annotation
The provisions of s. 236.41 relating to vacation of streets are inapplicable to assessors plats under s. 70.27. Once properly filed and recorded an assessor's plat becomes the operative document of record, and only sections specified in s. 236.03 (2) apply to assessor's plats. Schaetz v. Town of Scott,
222 Wis. 2d 90,
585 N.W.2d 889 (Ct. App. 1998).
236.03 Annotation
A replat of a recorded subdivision must comply with the formal platting requirements of ch. 236, relating to new subdivision plats, including those relating to the survey, approval and recording. 63 Atty. Gen. 193.
APPROVAL OF PLAT
236.10
236.10
Approvals necessary. 236.10(1)(1) To entitle a final plat of a subdivision to be recorded, it shall have the approval of the following in accordance with the provisions of
s. 236.12:
236.10(1)(a)
(a) If within a municipality, the governing body, but if the plat is within an area, the annexation of which is being legally contested, the governing bodies of both the annexing municipality and the town from which the area has been annexed shall approve.
236.10(1)(b)
(b) If within the extraterritorial plat approval jurisdiction of a municipality:
236.10(1)(b)2.
2. The governing body of the municipality if, by July 1, 1958, or thereafter it adopts a subdivision ordinance or an official map under
s. 62.23; and
236.10(1)(b)3.
3. The county planning agency if such agency employs on a full-time basis a professional engineer, a planner or other person charged with the duty of administering zoning or other planning legislation.
236.10(1)(c)
(c) If outside the extraterritorial plat approval jurisdiction of a municipality, the town board and the county planning agency, if there is one.
236.10(2)
(2) If a subdivision lies within the extraterritorial plat approval jurisdiction of more than one municipality, the provisions of
s. 66.0105 shall apply.
236.10(3)
(3) The authority to approve or object to preliminary or final plats under this chapter may be delegated to a planning committee or commission of the approving governing body. Final plats dedicating streets, highways or other lands shall be approved by the governing body of the town or municipality in which such are located.
236.10(4)
(4) Any municipality, town or county may under
s. 66.0301 agree with any other municipality, town or county for the cooperative exercise of the authority to approve or review plats. A municipality, town or county may, under
s. 66.0301, agree to have a regional planning commission review plats and submit an advisory recommendation with respect to their approval. A municipality, town or county may agree with a regional planning commission for the cooperative exercise of the authority to approve or review plats only as provided under
s. 66.0309 (11).
236.10(5)
(5) Any municipality may waive its right to approve plats within any portion of its extraterritorial plat approval jurisdiction by a resolution of the governing body recorded with the register of deeds incorporating a map or metes and bounds description of the area outside its corporate boundaries within which it shall approve plats. The municipality may rescind this waiver at any time by resolution of the governing body recorded with the register of deeds.
236.10 Annotation
City improperly included lots which were not within its extraterritorial plat approval jurisdiction in city's calculation of fee assessed developer. Brookhill Development, Ltd. v. City of Waukesha,
103 Wis. 2d 27,
307 N.W.2d 242 (1981).
236.10 Annotation
Artificial lakes and land subdivisions. Kusler, 1971 WLR 369.
236.11
236.11
Submission of plats for approval. 236.11(1)(a)(a) Before submitting a final plat for approval, the subdivider may submit, or the approving authority may require that the subdivider submit, a preliminary plat. It shall be clearly marked "preliminary plat" and shall be in sufficient detail to determine whether the final plat will meet layout requirements. Within 90 days the approving authority, or its agent authorized to approve preliminary plats, shall take action to approve, approve conditionally, or reject the preliminary plat and shall state in writing any conditions of approval or reasons for rejection, unless the time is extended by agreement with the subdivider. Failure of the approving authority or its agent to act within the 90 days, or extension thereof, constitutes an approval of the preliminary plat.
236.11(1)(b)
(b) If the final plat conforms substantially to the preliminary plat as approved, including any conditions of that approval, and to local plans and ordinances adopted as authorized by law, it is entitled to approval. If the final plat is not submitted within 24 months after the last required approval of the preliminary plat, any approving authority may refuse to approve the final plat. The final plat may, if permitted by the approving authority, constitute only that portion of the approved preliminary plat which the subdivider proposes to record at that time.
236.11(2)
(2) The body or bodies having authority to approve plats shall approve or reject the final plat within 60 days of its submission, unless the time is extended by agreement with the subdivider. When the approving authority is a municipality and determines to approve the plat, it shall give at least 10 days' prior written notice of its intention to the clerk of any municipality whose boundaries are within 1,000 feet of any portion of such proposed plat but failure to give such notice shall not invalidate any such plat. If a plat is rejected, the reasons therefor shall be stated in the minutes of the meeting and a copy thereof or a written statement of the reasons supplied the subdivider. If the approving authority fails to act within 60 days and the time has not been extended by agreement and if no unsatisfied objections have been filed within that period, the plat shall be deemed approved, and, upon demand, a certificate to that effect shall be made on the face of the plat by the clerk of the authority which has failed to act.
236.11 History
History: 1979 c. 248;
1997 a. 332.
236.11 Annotation
Under s. 236.11 (1) (a), 1967 stats., a village must act within 40 days as to a preliminary plat, even though the plat allegedly violates the official city map. Tabling consideration of the plat within 40 days is not sufficient. State ex rel. Lozoff v. Board of Trustees,
55 Wis. 2d 64,
197 N.W.2d 798.
236.12
236.12
Procedure for approval of plats. 236.12(1)
(1) This section shall not apply to cities of the first class nor to unincorporated land in a county having a population of 500,000 or more.
236.12(2)
(2) Within 2 days after a preliminary or final plat is submitted for approval, legible copies, together with a list of the authorities to which the plat must be submitted for approval under
s. 236.10 or objection under this subsection, furnished by the subdivider at the subdivider's expense, shall be sent, by the clerk or secretary of the approving authority to which the plat is submitted, to the following agencies which have authority to object to the plat:
236.12(2)(a)
(a) Two copies for each of the state agencies required to review the plat to the department which shall examine the plat for compliance with
ss. 236.15,
236.16,
236.20 and
236.21 (1) and
(2). If the subdivision abuts or adjoins a state trunk highway or connecting highway, the department shall transmit 2 copies to the department of transportation so that agency may determine whether it has any objection to the plat on the basis of its rules as provided in
s. 236.13. If the subdivision is not served by a public sewer and provision for that service has not been made, the department shall transmit 2 copies to the department of commerce so that that agency may determine whether it has any objection to the plat on the basis of its rules as provided in
s. 236.13. In lieu of this procedure the agencies may designate local officials to act as their agents in examining the plats for compliance with the statutes or their rules by filing a written delegation of authority with the approving body.
236.12(2)(b)
(b) Four copies to the county planning agency, if the agency employs on a full-time basis a professional engineer, a planner, or other person charged with the duty of administering planning legislation and adopts a policy requiring submission so that body may determine if it has any objection to the plat on the basis of conflict with park, parkway, expressway, major highways, airports, drainage channels, schools, or other planned public developments. If no county planning agency exists, then 2 copies to the county park commission except that in a county with a county executive or county administrator, 2 copies to the county park manager, if the subdivision abuts a county park or parkway so that body may determine if it has any objection to the plat on the basis of conflict with the park or parkway development.
236.12(3)
(3) Within 20 days of the date of receiving the copies of the plat any agency having authority to object under
sub. (2) shall notify the subdivider and all approving or objecting authorities of any objection based upon failure of the plat to comply with the statutes or rules which its examination under
sub. (2) is authorized to cover, or, if there is no objection, it shall so certify on the face of a copy of the plat and return that copy to the approving authority from which it was received. The plat shall not be approved or deemed approved until any objections have been satisfied. If the objecting agency fails to act within the 20-day limit it shall be deemed to have no objection to the plat. No approving authority may inscribe its approval on a plat prior to the affixing of the certificates under either
sub. (4) or
(6).
236.12(4)
(4) The clerk or secretary of the approving authority forwarding copies of the plat under
sub. (2) shall certify on the face of the plat that the copies were forwarded as required and the date thereof and that no objections to the plat have been filed within the 20-day limit set by
sub. (3) or, if filed, have been met.
236.12(5)
(5) Where more than one approval is required, copies of the plat shall be sent as required by
sub. (2) by the approving authority to which the plat is first submitted.
236.12(6)
(6) In lieu of the procedure under
subs. (2) to
(5), the subdivider or the subdivider's agent may submit the original plat to the department which shall forward 2 copies to each of the agencies authorized by
sub. (2) to object. The department shall have the required number of copies made at the subdivider's expense. Within 20 days of the date of receiving the copies of the plat any agency having authority to object under
sub. (2) shall notify the subdivider, and all agencies having the authority to object, of any objection based upon failure of the plat to comply with the statutes or rules which its examination under
sub. (2) is authorized to cover, or, if there is no objection, it shall so certify on the face of a copy of the plat and return that copy to the department. After each agency and the department have certified that they have no objection or that their objections have been satisfied, the department shall so certify on the face of the plat. If an agency fails to act within 20 days from the date of the receipt of copies of the plat, and the department fails to act within 30 days of receipt of the original plat it shall be deemed that there are no objections to the plat and, upon demand, it shall be so certified on the face of the plat by the department.
236.12(7)
(7) The department and the state agencies referred to in
s. 236.13 (1) may charge reasonable service fees for all or part of the costs of activities and services provided by the department under this section and
s. 70.27. A schedule of such fees shall be established by rule by each such agency.
236.12(8)
(8) In order to facilitate approval of the final plat where more than one approval is required, the subdivider may file a true copy of the plat with the approving authority or authorities with which the original of the final plat has not been filed. The approval of such authorities may be based on such copy but shall be inscribed on the original of the final plat. Before inscribing its approval, the approving authority shall require the surveyor or the owner to certify the respects in which the original of the final plat differs from the copy. All modifications in the final plat shall be approved before final approval is given.
236.12 Annotation
"Planned public development" under (2) (b) is one which county board has adopted by ordinance. Reynolds v. Waukesha County Park & Plan. Comm.
109 Wis. 2d 56,
324 N.W.2d 897 (Ct. App. 1982).
236.13
236.13
Basis for approval. 236.13(1)(1) Approval of the preliminary or final plat shall be conditioned upon compliance with:
236.13(1)(c)
(c) A comprehensive plan under
s. 66.0295 [
s. 66.1001] or, if the municipality, town or county does not have a comprehensive plan, either of the following:
236.13 Note
NOTE: The bracketed language indicates the correct cross-reference. Corrective legislation is pending.
236.13(1)(d)
(d) The rules of the department of commerce relating to lot size and lot elevation necessary for proper sanitary conditions in a subdivision not served by a public sewer, where provision for public sewer service has not been made;
236.13(1)(e)
(e) The rules of the department of transportation relating to provision for the safety of entrance upon and departure from the abutting state trunk highways or connecting highways and for the preservation of the public interest and investment in such highways.
236.13(2)(a)(a) As a further condition of approval, the governing body of the town or municipality within which the subdivision lies may require that the subdivider make and install any public improvements reasonably necessary or that the subdivider execute a surety bond or provide other security to ensure that he or she will make those improvements within a reasonable time.
236.13(2)(b)
(b) Any city or village may require as a condition for accepting the dedication of public streets, alleys or other ways, or for permitting private streets, alleys or other public ways to be placed on the official map, that designated facilities shall have been previously provided without cost to the municipality, but which are constructed according to municipal specifications and under municipal inspection, such as, without limitation because of enumeration, sewerage, water mains and laterals, grading and improvement of streets, alleys, sidewalks and other public ways, street lighting or other facilities designated by the governing body, or that a specified portion of such costs shall be paid in advance as provided in
s. 66.0709.
236.13(2)(c)
(c) Any county, town, city or village may require as a condition of approval that the subdivider be responsible for the cost of any necessary alterations of any existing utilities which, by virtue of the platting or certified survey map, fall within the public right-of-way.
236.13(2)(d)
(d) As a further condition of approval, any county, town, city or village may require the dedication of easements by the subdivider for the purpose of assuring the unobstructed flow of solar or wind energy across adjacent lots in the subdivision.
236.13(2m)
(2m) As a further condition of approval when lands included in the plat lie within 500 feet of the ordinary high-water mark of any navigable stream, lake or other body of navigable water or if land in the proposed plat involves lake or stream shorelands referred to in
s. 236.16, the department of natural resources, to prevent pollution of navigable waters, or the department of commerce, to protect the public health and safety, may require assurance of adequate drainage areas for private sewage disposal systems and building setback restrictions, or provisions by the owner for public sewage disposal facilities for waters of the state, as defined in
s. 281.01 (18), industrial wastes, as defined in
s. 281.01 (5), and other wastes, as defined in
s. 281.01 (7). The public sewage disposal facilities may consist of one or more systems as the department of natural resources or the department of commerce determines on the basis of need for prevention of pollution of the waters of the state or protection of public health and safety.
236.13(3)
(3) No approving authority or agency having the power to approve or object to plats shall condition approval upon compliance with, or base an objection upon, any requirement other than those specified in this section.
236.13(4)
(4) Where more than one governing body or other agency has authority to approve or to object to a plat and the requirements of such bodies or agencies are conflicting, the plat shall comply with the most restrictive requirements.
236.13(5)
(5) Any person aggrieved by an objection to a plat or a failure to approve a plat may appeal therefrom as provided in
s. 62.23 (7) (e) 10.,
14. and
15., within 30 days of notification of the rejection of the plat. For the purpose of such appeal the term "board of appeals" means an "approving authority". Where the failure to approve is based on an unsatisfied objection, the agency making the objection shall be made a party to the action. The court shall direct that the plat be approved if it finds that the action of the approving authority or objecting agency is arbitrary, unreasonable or discriminatory.
236.13(6)
(6) An outlot may not be used as a building site unless it is in compliance with restrictions imposed by or under this section with respect to building sites. An outlot may be conveyed regardless of whether it may be used as a building site.
236.13 Annotation
Local units of government may not reject proposed plats under this section unless plat conflicts with existing statutory requirement of this chapter or with existing written ordinance, master plan, official map, or rule under (1). State ex rel. Columbia Corp. v. Pacific Town Board,
92 Wis. 2d 767,
286 N.W.2d 130 (Ct. App. 1979).
236.13 Annotation
Under (2) (a) authority to condition plat approval on public improvements is with governing body of territory in which subdivision is located. Rice v. City of Oshkosh,
148 Wis. 2d 78,
435 N.W.2d 252 (1989).
236.13 Annotation
Municipalities have no authority to impose conditions upon a subdivider that extend beyond its borders. Pedersen v. Town of Windsor,
191 Wis. 2d 664,
530 N.W.2d 427 (Ct. App. 1995).
236.13 Annotation
Sub. (2) (a) does not grant a municipality the power to establish public improvement requirements without an ordinance. Pedersen v. Town of Windsor,
191 Wis. 2d 664,
530 N.W.2d 427 (Ct. App. 1995).
236.13 Annotation
Sub. (1) (d) does not prevent municipalities from enacting more restrictive sewer regulations than the rules cited in that paragraph. Manthe v. Town of Windsor,
204 Wis. 2d 546,
555 N.W.2d 156 (Ct. App. 1996).
236.13 Annotation
So long as any issues addressed in both a master plan and an official map are not contradictory, for purposes of sub. (1) (c), the master plan is consistent with the official map. A master plan is not inconsistent with an official map if the plan contains elements the map does not. Lake City Corp. v. City of Mequon,
207 Wis. 2d 156,
558 N.W.2d 100 (1997).
236.13 Annotation
In the area of minimum lot size regulation, the power of a plan commission authorized to review plats is not limited or detracted by zoning regulations. Lake City Corp. v. City of Mequon,
207 Wis. 2d 156,
558 N.W.2d 100 (1997).
236.13 Annotation
As sub. (5) does not expressly designate the "appealing authority" to whom appeal papers should be directed, the appellant's service of the appeal on the county Planning and Development Department rather than the Planning and Development Committee, which had made the disputed decision, was not grounds for dismissal when there had been pervasive use of Department personnel and stationery in the process. Weber v. Dodge County Planning and Development Dept.
231 Wis. 2d 222,
604 N.W.2d 297 (Ct. App. 1999).
LAYOUT REQUIREMENTS
236.15
236.15
Surveying requirements. For every subdivision of land there shall be a survey meeting the following requirements:
236.15(1)
(1) Monuments. All of the monuments required in
pars. (a) to
(h) shall be placed flush with the ground where practicable.
236.15(1)(a)
(a) The external boundaries of a subdivision shall be monumented in the field by monuments of concrete containing a ferrous rod one-fourth inch in diameter or greater imbedded its full length, not less than 30 inches in length, not less than 4 inches square or 5 inches in diameter, and marked on the top with a cross, brass plug, iron rod, or other durable material securely embedded; or by iron rods or pipes at least 30 inches long and 2 inches in diameter weighing not less than 3.65 pounds per lineal foot. Solid round or square iron bars of equal or greater length or weight per foot may be used in lieu of pipes wherever pipes are specified in this section. These monuments shall be placed at all corners, at each end of all curves, at the point where a curve changes its radius, at all angle points in any line and at all angle points along the meander line, said points to be not less than 20 feet back from the ordinary high water mark of the lake or from the bank of the stream, except that when such corners or points fall within a street, or proposed future street, the monuments shall be placed in the side line of the street.
236.15(1)(b)
(b) All internal boundaries and those corners and points not required to be marked by
par. (a) shall be monumented in the field by like monuments as defined in
par. (a). These monuments shall be placed at all block corners, at each end of all curves, at the point where a curve changes its radius, and at all angle points in any line.
236.15(1)(c)
(c) All lot, outlot, park and public access corners and the corners of land dedicated to the public shall be monumented in the field by iron pipes at least 24 inches long and one inch in diameter, weighing not less than 1.13 pounds per lineal foot, or by round or square iron bars at least 24 inches long and weighing not less than 1.13 pounds per lineal foot.
236.15(1)(d)
(d) The lines of lots, outlots, parks and public access and land dedicated to the public that extend to lakes or streams shall be monumented in the field by iron pipes at least 24 inches long and one inch in diameter weighing not less than 1.13 pounds per lineal foot, or by round or square iron bars at least 24 inches long and weighing not less than 1.13 pounds per lineal foot. These monuments shall be placed at the point of intersection of the lake or stream lot line with a meander line established not less than 20 feet back from the ordinary high water mark of the lake or from the bank of the stream.
236.15(1)(f)
(f) Any durable metal or concrete monuments may be used in lieu of the iron pipes listed in
pars. (c) and
(d) provided that they are uniform within the platted area and have a permanent magnet embedded near the top or bottom or both.
236.15(1)(g)
(g) In cases where strict compliance with this subsection would be unduly difficult or would not provide adequate monuments, the department may make other reasonable requirements.
236.15(1)(h)
(h) The governing body of the city, village or town which is required to approve the subdivision under
s. 236.10 may waive the placing of monuments under
pars. (b),
(c) and
(d) for a reasonable time on condition that the subdivider executes a surety bond to ensure that he or she will place the monuments within the time required.
236.15(2)
(2) Accuracy of survey. The survey shall be performed by a land surveyor registered in this state and if the error in the latitude and departure closure of the survey or any part thereof is greater than the ratio of one in 3,000, the plat may be rejected.
236.15 Annotation
All permanent survey monuments required by 236.15 (1) (a), (b), (c) and (d), Stats. 1969, must be placed in the field prior to submission of a final subdivision plat for state level review; provided, however, that in the event of a waiver under sub. (1) (h), the placement of all permanent monuments other than those required by sub. (1) (a), may be temporarily deferred. 59 Atty. Gen. 262.
236.16
236.16
Layout requirements. 236.16(1)(1)
Minimum lot width and area. In counties having a population of 40,000 or more, each lot in a residential area shall have a minimum average width of 50 feet and a minimum area of 6,000 square feet; in counties of less than 40,000, each lot in a residential area shall have a minimum average width of 60 feet and a minimum area of 7,200 square feet. In municipalities, towns and counties adopting subdivision control ordinances under
s. 236.45, minimum lot width and area may be reduced to dimensions authorized under such ordinances if the lots are served by public sewers.
236.16(2)
(2) Minimum street width. All streets shall be of the width specified on the master plan or official map or of a width at least as great as that of the existing streets if there is no master plan or official map, but no full street shall be less than 60 feet wide unless otherwise permitted by local ordinance. Widths of town roads platted after January 1, 1966, shall, however, comply with minimum standards for town roads prescribed by
s. 86.26. Streets or frontage roads auxiliary to and located on the side of a full street for service to the abutting property may not after January 1, 1966, be less than 49.5 feet wide.
236.16(3)(a)(a) All subdivisions abutting on a navigable lake or stream shall provide public access at least 60 feet wide providing access to the low watermark so that there will be public access, which is connected to existing public roads, at not more than one-half mile intervals as measured along the lake or stream shore except where greater intervals and wider access is agreed upon by the department of natural resources and the department, and excluding shore areas where public parks or open-space streets or roads on either side of a stream are provided.
236.16(3)(b)
(b) No public access established under this chapter may be vacated except by circuit court action as provided in
s. 236.43.
236.16(3)(c)
(c) Except as provided in
par. (d), this subsection does not require any local unit of government to improve land provided for public access.
236.16(3)(d)
(d) All of the owners of all of the land adjacent to a public access established under
par. (a) to an inland lake, as defined in
s. 30.92 (1) (bk), may petition the city, village, town or county that owns the public access to construct shoreline erosion control measures. Subject to
par. (e), the city, village, town or county shall construct the requested shoreline erosion control measures or request the department of natural resources to determine the need for shoreline erosion control measures. Upon receipt of a request under this paragraph from a city, village, town or county, the department of natural resources shall follow the procedures in
s. 30.02 (3) and
(4). Subject to
par. (e), the city, village, town or county shall construct shoreline erosion control measures as required by the department of natural resources if the department of natural resources determines all of the following:
236.16(3)(d)1.
1. Erosion is evident along the shoreline in the vicinity of the public access.
