347.44(4)(b)
(b) Repaints the entire vehicle to a color other than national school bus glossy yellow or any color commonly referred to as yellow.
347.44 Cross-reference
Cross-reference: See also ch.
Trans 300, Wis. adm. code.
347.445
347.445
Crossing gates for school buses. No person may operate a school bus that is painted as provided in
s. 347.44 unless it is equipped with a retractable crossing gate on the front of the bus that, when in use, prevents children from crossing in front of the school bus in such proximity that they are not visible to the operator of the school bus from the operator's seat. The secretary shall prescribe rules for the specifications, installation, and operation of crossing gates required under this section.
347.445 History
History: 2001 a. 58.
347.45(1)(1) All automobiles, motor trucks, motor buses, truck tractors, trailers, semitrailers, recreational vehicles, and mobile homes when operated upon a highway shall be completely equipped with tires inflated with compressed air and all other motor vehicles when operated on a highway shall be equipped with tires of rubber or of some material or construction of equal resiliency. No person may operate on a highway any motor vehicle, trailer, semitrailer, recreational vehicle, or mobile home having any metal tire in contact with the roadway, except that tire chains of reasonable proportions may be used when required for safety because of snow, ice or other conditions tending to cause a vehicle to skid, and except as provided in
sub. (2) (c).
347.45(2)
(2) No person shall operate on a highway any vehicle, including farm tractors, self-propelled farm implements, implements of husbandry, animal-drawn vehicles and road machinery, if such vehicle has on the periphery of any of its tires any block, stud, flange, cleat, spike or other protuberance of any material other than rubber which projects beyond the tread of the traction surface of the tire, except that:
347.45(2)(a)
(a) Farm tractors, self-propelled farm implements, implements of husbandry, animal-drawn vehicles and road machinery may be operated with metal tires or tires having protuberances that will not injure the highway.
347.45(2)(b)
(b) Tire chains of reasonable proportions may be used on any vehicle when required for safety because of snow, ice or other conditions tending to cause a vehicle to skid.
347.45(2)(c)
(c) A pneumatic tire may have embedded in it wire or wire coils for improving traction on ice and snow, but such tire shall be so constructed that the percentage of wire or wire coils in contact with the roadway does not exceed, after the first 1,000 miles of use or operation, 5 percent of the total tire area in contact with the roadway. During the first 1,000 miles of use or operation of any such tire the wire or wire coils in contact with the roadway shall not exceed 20 percent of the total tire area in contact with the roadway. Tires equipped with tungsten carbide studs shall be limited in usage and design as follows:
347.45(2)(c)1.
1. The department shall, by rule, designate the times of year during which any type of tire described in this paragraph may be used.
347.45(2)(c)2.
2. Such tires may be used only on authorized emergency vehicles, school buses, vehicles used to deliver mail and automobiles with out-of-state registrations and then only if such automobile is in the course of passing through this state for a period of not more than 30 days.
347.45(2)(c)3.
3. Such studs shall not project more than one-eighth inch beyond the tread surface of the tire.
347.45(3)
(3) The authority in charge of maintenance of the highway in question may, in its discretion, issue a special permit authorizing operation upon such highway of a vehicle the operation of which would otherwise be prohibited under this section.
347.45(4)
(4) No person shall knowingly operate on any highway any vehicle on which any tire has been regrooved or recut or offer such tire for sale or exchange. This subsection shall not apply to regrooved or recut commercial vehicle tires which are designed and constructed in such a manner that regrooving or recutting is an acceptable and safe practice, nor does this subsection apply to regrooving or recutting done in a tire recapping process.
347.455
347.455
Modifications to height of vehicle. 347.455(1)
(1) Except as further provided in this section, no person may operate any vehicle on a highway if modifications have been made to the suspension system, axles or chassis of the vehicle which cause any portion of the vehicle to ride more than 4 inches above the height of the vehicle specified by the manufacturer. The height of the vehicle shall be measured from the level surface on which the vehicle stands.
347.455(2)
(2) If the modification is for the purpose of strengthening or improving handling, modifications may be made to the suspension system, axles or chassis of a 4-wheel drive vehicle or a motor truck which has a gross weight of not more than 8,000 pounds which cause the vehicle to ride 5 or less inches above the height of the vehicle specified by the manufacturer. The height of the vehicle shall be measured from the level surface on which the vehicle stands.
347.455(3)
(3) A 4-wheel drive vehicle or a motor truck which has a gross weight of not more than 8,000 pounds may be modified to use a tire and wheel size which exceeds the wheel and tire size specified by the manufacturer for the vehicle by up to 4 inches in radius.
347.455(4)
(4) No person may operate any vehicle on a highway if modifications have been made to the suspension system, axles, chassis or exhaust system of the vehicle which cause any portion of the vehicle, except the tires, to extend below lines drawn from the bottom of each wheel rim to the points of contact between the tires on the opposite side and opposite end of the vehicle and the level surface on which the vehicle stands.
347.455 History
History: 1981 c. 216;
1993 a. 165.
347.46
347.46
Fenders and mudguards. 347.46(1)
(1) No person shall operate a vehicle of the tractor type on a highway unless the driving wheels of such vehicle are protected by suitable fenders.
347.46(2)
(2) No person shall operate on a highway in intercity movement any privately owned motor truck or privately owned semitrailer drawn by a truck tractor, except those motor trucks and semitrailers equipped with dump bodies, unless such motor truck or semitrailer is equipped with rear fenders or mudguards of such material and so constructed and placed as to restrict to a minimum the splashing of water, mud or other material which may be thrown by the rear wheels. Such rear fenders or mudguards shall meet the following minimum specifications:
347.46(2)(a)
(a) The fenders or mudguards shall cover the tire or multiple tires they are protecting starting at the top from a line drawn vertically through the center of the axle and extending rearward and downward so that the fender or mudguard under any condition of operation or loading of the vehicle has a ground clearance of not more than one third of the horizontal distance from the center of the rearmost axle to the fender or mudguard;
347.46(2)(b)
(b) The fenders or mudguards shall be at least as wide as the tire or multiple tires they are protecting;
347.46(2)(c)
(c) If the vehicle is so designed and constructed that the rear wheels are covered in the manner specified in
pars. (a) and
(b) by means of fenders, body construction or other means of enclosure, then no special mudguards are required. Otherwise, the vehicle shall be equipped with special mudguards to the extent necessary to meet the requirements of
pars. (a) and
(b).
347.46 Cross-reference
Cross-reference: See also ss.
Trans 305.22 and
305.53, Wis. adm. code.
347.47
347.47
Drawbars, trailer hitches and mobile home couplings. 347.47(1)(1) No person shall operate a vehicle towing or drawing another vehicle or vehicles on a highway if the drawbar or other connection between any 2 vehicles exceeds 12 feet in length.
347.47(2)
(2) No person shall operate a motor vehicle drawing a trailer, semitrailer, recreational vehicle, or mobile home upon a highway unless the hitch and coupling attaching the trailer, semitrailer, recreational vehicle, or mobile home to the vehicle by which it is drawn is of such construction as to cause such trailer, semitrailer, recreational vehicle, or mobile home to follow in direct line with the propelling vehicle without dangerous side swing or wobble. The hitch and coupling, the surface to which they are attached, and the connections, shall be of sufficient strength to prevent failure under all conditions of operation. The hitch is that part of the connecting mechanism, including the coupling platform and its attaching members or weldments, which is attached to the towing vehicle. The coupling is that part of the connecting mechanism, including the coupling and its attaching members or weldments, which is attached to the trailer, recreational vehicle, or mobile home and by which connection is made to the hitch. If a device is used between the trailer proper and the coupling such as a pole, such device shall also meet the requirements of this section.
347.47(3)
(3) In addition to the hitch and coupling specified in
sub. (2), every towed vehicle shall be coupled to the towing vehicle by means of safety chains, leveling bars or cables. This requirement does not apply to a semitrailer having a connecting device composed of a 5th wheel and kingpin assembly, nor to a pole or pipe dolly. The safety chains, leveling bars or cables shall have only the necessary slack to permit proper turning and safety chains or cables shall be so connected to the towed and towing vehicle to prevent the drawbar from dropping to the ground if the hitch or coupling disengages. Two separate lengths of safety chain, leveling bars or cable shall be required on all trailers and mobile homes; however, the department may authorize use of such other appropriate equipment or methods approved by nationally recognized organizations which recommend safety standards for motor vehicles.
347.47(4)
(4) Trailer, semitrailer, recreational vehicle, and mobile home couplings and the safety chains, leveling bars or cables shall be of such minimum strength, design and type as established by published rule of the department.
347.475
347.475
Airbags, prohibited practices. 347.475(1)
(1) In this section, "airbag" means an inflatable restraint system that is designed to be installed and to operate in a motor vehicle to deploy by inflating upon an impact of the vehicle with another object.
347.475(2)
(2) No person may, either personally or through an agent, sell, install, reinstall, or distribute any previously deployed airbag. This subsection does not apply to the sale of a motor vehicle with a previously deployed airbag unless the deployment is concealed or disguised.
347.475(3)
(3) No person may, either personally or through an agent, remove, disconnect, tamper with, or otherwise circumvent the operation of any airbag, except for the purpose of testing, repairing, or maintaining an airbag, salvaging an undeployed airbag, disposing of a deployed airbag, or replacing a deployed airbag with a functional airbag. This subsection does not apply to the installation or use of an on-off switch by any person who is authorized by federal law or regulation to install or use an on-off switch for an airbag.
347.475(4)
(4) No person may, either personally or through an agent, install a cover or otherwise conceal or disguise a missing airbag or a previously deployed airbag.
347.475 History
History: 2001 a. 28.
347.48
347.48
Safety belts and child safety restraint systems. 347.48(1)(a)(a) No person may buy, sell, lease, trade or transfer a motor vehicle other than an automobile at retail from or to Wisconsin residents unless the vehicle is equipped with safety belts installed for use as required under
49 CFR 571, and no such vehicle may be operated in this state unless such belts remain installed.
347.48(1)(b)
(b) No person may buy, sell, lease, trade or transfer an automobile that is required under
49 CFR 571 to be equipped with safety belts from or to a resident of this state unless the front designated seating positions of the automobile are equipped with safety belts installed for use as required under
49 CFR 571 and unless each rear outboard designated seating position of the automobile is equipped with a safety belt consisting of a combination of a pelvic and upper torso restraint that conforms to standards for a Type 2 seat belt assembly under
49 CFR 571.209, and no automobile may be operated in this state unless such belts remain installed. Nothing in this section applies to antique reproductions.
347.48(2)
(2) Type and manner of installing. All such safety belts must be of a type and must be installed in a manner approved by the department. The department shall establish specifications and requirements for approved types of safety belts and attachments thereto. The department will accept, as approved, all seat belt installations and the belt and anchor meeting the society of automotive engineers' specifications.
347.48(2m)(a)(a) In this subsection, "properly restrained" means wearing a safety belt approved by the department under
sub. (2) and fastened in a manner prescribed by the manufacturer of the safety belt which permits the safety belt to act as a body restraint.
347.48(2m)(b)
(b) If a motor vehicle is required to be equipped with safety belts in this state, no person may operate that motor vehicle unless the person is properly restrained in a safety belt.
347.48(2m)(c)
(c) If a motor vehicle is required to be equipped with safety belts in this state, no person may operate that motor vehicle unless each passenger who is at least 8 years old and who is seated at a designated seating position in the front seat required under
49 CFR 571 to have a safety belt installed or at a designated seating position in the seats, other than the front seats, for which a safety belt is required to be installed is properly restrained.
347.48(2m)(d)
(d) If a motor vehicle is required to be equipped with safety belts in this state, no person who is at least 8 years old and who is seated at a designated seating position in the front seat required under
49 CFR 571 to have a safety belt installed or at a designated seating position in the seats, other than the front seats, for which a safety belt is required to be installed may be a passenger in that motor vehicle unless the person is properly restrained.
347.48(2m)(dm)
(dm) Paragraphs (b),
(c) and
(d) do not apply to the operation of an authorized emergency vehicle by a law enforcement officer or other authorized operator under circumstances in which compliance could endanger the safety of the operator or another.
347.48(2m)(dr)
(dr) Paragraph (b) does not apply to the operator of a vehicle while on a route which requires the operator to make more than 10 stops per mile involving an exit from the vehicle in the scope of his or her employment.
Paragraphs (c) and
(d) do not apply to a passenger while on a route which requires the passenger to make more than 10 stops per mile involving an exit from the vehicle in the scope of his or her employment.
347.48(2m)(e)
(e) The department shall, by rule, exempt from the requirements under
pars. (b) to
(d) persons who, because of a physical or medical condition, cannot be properly restrained in a safety belt.
347.48 Cross-reference
Cross-reference: See also ch.
Trans 315, Wis. adm. code.
347.48(2m)(f)1.1. This subsection does not apply if the motor vehicle is a taxicab or is not required to be equipped with safety belts under
sub. (1) or
49 CFR 571.
347.48(2m)(f)2.
2. This subsection does not apply to a privately owned motor vehicle while being operated by a rural letter carrier for the delivery of mail or while being operated by a delivery person for the delivery of newspapers or periodicals.
347.48(2m)(f)3.
3. This subsection does not apply to a motor vehicle while being operated by a land surveying crew while conducting a land survey along or upon the highway.
347.48(2m)(f)7.
7. This subsection does not apply to a farm truck or dual purpose farm truck while being used in conjunction with the planting or harvesting of crops and not being operated upon the highway.
347.48(2m)(g)
(g) Evidence of compliance or failure to comply with
par. (b),
(c) or
(d) is admissible in any civil action for personal injuries or property damage resulting from the use or operation of a motor vehicle. Notwithstanding
s. 895.045, with respect to injuries or damages determined to have been caused by a failure to comply with
par. (b),
(c) or
(d), such a failure shall not reduce the recovery for those injuries or damages by more than 15%. This paragraph does not affect the determination of causal negligence in the action.
347.48(2m)(gm)
(gm) A law enforcement officer may not take a person into physical custody solely for a violation of this subsection or
sub. (1) or
(2) or a local ordinance in conformity with this subsection,
sub. (1) or
(2) or rules of the department.
347.48(3m)
(3m) Safety belt information program. The department shall develop and administer a public information program to promote safety belt awareness and use.
347.48(4)
(4) Child safety restraint systems required; standards; exemptions. 347.48(4)(ag)1.
1. "Child booster seat" means a child passenger restraint system that meets the applicable federal standards under
49 CFR 571.213 and is designed to elevate a child from a vehicle seat to allow the vehicle's safety belt to be properly positioned over the child's body.
347.48(4)(ag)3.a.
a. With respect to
par. (as) 1. and
2., fastened in a manner prescribed by the manufacturer of the child safety restraint system which permits the system to act as a body restraint but does not include a system in which the only body restraint is a safety belt of the type required under
sub. (1).
347.48(4)(ag)3.b.
b. With respect to
par. (as) 3., wearing a safety belt consisting of a combination lap belt and shoulder harness approved by the department under
sub. (2) and fastened in a manner prescribed by the manufacturer of the safety belt so that the safety belt properly fits across the child's lap and the center of the child's chest in a manner appropriate to the child's height, weight, and age that permits the safety belt to act as a body restraint.
347.48(4)(ag)3.c.
c. With respect to
par. (as) 4., fastened in a manner prescribed by the manufacturer of the system which permits the system to act as a body restraint.
347.48(4)(am)
(am) No person may transport a child under the age of 8 in a motor vehicle unless the child is restrained in compliance with
par. (as) in a safety restraint system that is appropriate to the child's age and size and that meets the standards established by the department under this paragraph. The department shall, by rule, establish standards in compliance with applicable federal standards, including standards under
49 CFR 571.213, for child safety restraint systems.
347.48(4)(as)
(as) A child under the age of 8 years who is being transported in a motor vehicle shall be restrained as follows:
347.48(4)(as)1.
1. If the child is less than one year old or weighs less than 20 pounds, the child shall be properly restrained in a rear-facing child safety restraint system, positioned at a designated seating position in a back passenger seat of the vehicle if the vehicle is equipped with a back passenger seat.
347.48(4)(as)2.
2. Subject to
subd. 1., if the child is at least one year old and weighs at least 20 pounds but is less than 4 years old or weighs less than 40 pounds, the child shall be properly restrained in a forward-facing child safety restraint system, positioned at a designated seating position in a back passenger seat of the vehicle if the vehicle is equipped with a back passenger seat.
347.48(4)(as)3.
3. Subject to
subds. 1. and
2., if the child is at least 4 years old but less than 8 years old, weighs at least 40 pounds but not more than 80 pounds, and is not more than 57 inches in height, the child shall be properly restrained in a child booster seat.
347.48(4)(as)4.
4. Subject to
subds. 1. to
3., if the child is less than 8 years old, the child shall be properly restrained in a safety belt approved by the department under
sub. (2).
347.48(4)(b)
(b) The department may, by rule, exempt from the requirements under
pars. (am) and
(as) any child who because of a physical or medical condition or body size cannot be placed in a child safety restraint system, child booster seat, or safety belt.
347.48(4)(c)
(c) This subsection does not apply if the motor vehicle is a motor bus, school bus, taxicab, moped, motorcycle or is not required to be equipped with safety belts under
sub. (1) or
49 CFR 571.
347.48(4)(d)
(d) Evidence of compliance or failure to comply with
pars. (am) and
(as) is admissible in any civil action for personal injuries or property damage resulting from the use or operation of a motor vehicle but failure to comply with
pars. (am) and
(as) does not by itself constitute negligence.
347.48 Annotation
"Seat belt negligence" and "passive negligence" are distinguished. Jury instructions regarding seat belts are recommended. A method for apportioning damages in seat belt negligence cases is adopted. Foley v. City of West Allis,
113 Wis. 2d 475,
335 N.W.2d 824 (1983).
347.48 Annotation
A common law action for contribution may not be brought against a person who violates sub. (2m) (g). Gaertner v. Holcka,
219 Wis. 2d 436,
580 N.W.2d 271 (1998),
96-2726.
347.48 Annotation
A statute requiring the wearing of seat belts in motor vehicles would be constitutional. 58 Atty. Gen. 241.
