SPS 50.250(3) (3) Failure to respond to a notice of violation or to comply with a plan of correction approved by the department is subject to the provisions for misconduct under s. 440.205, Stats., and to the disciplinary proceedings and actions under s. 454.29, Stats.
SPS 50.250 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13.
SPS 50.260 SPS 50.260Change of ownership or location.
SPS 50.260(1)(1) Change of ownership of any establishment constitutes the creation of a new establishment and shall include submission of an application to the department for a new establishment license.
SPS 50.260(2) (2) Change of location of any establishment constitutes the creation of a new establishment and shall include submission of an application to the department for a new establishment license. Relocation of a leased chair or booth that is licensed as an establishment and housed within a lessor establishment shall include written notification to the department identifying the change of chair or booth.
SPS 50.260 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13.
SPS 50.270 SPS 50.270Equipment and sanitation.
SPS 50.270(1) (1) All areas of an establishment and the equipment, tools, and implements used by licensees for services in an establishment shall be maintained in a clean, sanitary, and safe condition.
SPS 50.270(2) (2) Licensees shall wash their hands thoroughly with soap and running water prior to serving each patron and following removal of gloves. Waterless hand washing agents that kill 99.99% of germs are an acceptable substitute for using soap and running water to wash hands that are not visibly soiled.
SPS 50.270(3) (3) Contact equipment that cannot be cleaned with soap or detergent and water shall be disposed of following each use.
SPS 50.270(4) (4) All liquids, creams, powders, and semi-solid substances shall be dispensed from a container in a manner that will prevent contamination of the unused portion of the substance.
SPS 50.270(5) (5) Shampoo bowls and basins shall be drained after each use and kept in a sanitary and safe condition.
SPS 50.270(6) (6) Clean towels shall be used for each patron. A neck strip or towel shall be placed around the neck of the patron to prevent contact with the cape. The head rest of any operating chair shall be covered with fresh linen or paper for each patron.
SPS 50.270(7) (7) All other equipment and instruments shall be clean to sight and touch.
SPS 50.270 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13.
SPS 50.271 SPS 50.271Disinfection.
SPS 50.271(1) (1) Unless sterilized, disinfection is required prior to reusing any personal care instruments or contact equipment on another patron.
SPS 50.271(2) (2) Disinfection for personal care instruments shall consist of cleaning with soap and water to remove all organic material, wiping with or spraying with a disinfectant, and air-drying.
SPS 50.271(3) (3) Disinfection for contact equipment shall consist of cleaning with soap and water to remove all organic material, soaking in or spraying with a disinfectant, and air-drying.
SPS 50.271(4) (4) Clean and disinfected contact equipment shall be placed in one or more covered containers. One or more separate containers shall be provided for the immediate storage of soiled contact equipment until cleaned and disinfected.
SPS 50.271(5) (5) Disinfectant used for decontamination shall be changed as per manufacturer's recommendations and shall be kept in a covered container.
SPS 50.271(6) (6) Laundry shall be disinfected by washing with a solution containing a germicidal compound.
SPS 50.271 Note Note: Bleach and Lysol® (brown bottle) are examples of germicidal compounds.
SPS 50.271 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13.
SPS 50.272 SPS 50.272Sterilization.
SPS 50.272(1) (1) Sterilization shall be accomplished by use of a dry heat or steam sterilizer cleared for marketing by the food and drug administration, and shall be used according to the manufacturer's instructions. If steam sterilization, moist heat, is utilized, heat exposure shall be at a minimum of 121°C or 250°F, for at least 30 minutes. If dry heat sterilization is utilized, heat exposure shall be at a minimum of 171°C or 340°F, for at least 60 minutes.
SPS 50.272(2) (2) Sterilizers shall be maintained in working order. Equipment shall be checked in compliance with the manufacturer's recommendations at least monthly to ensure that it is reaching required temperatures.
SPS 50.272 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13.
SPS 50.280 SPS 50.280Supplies.
SPS 50.280(1) (1) All work stations shall be supplied with at least one of the antiseptics listed in s. SPS 50.290 (2) or (4) for use by licensees in case of injury.
SPS 50.280(2) (2) All licensees working in a licensed establishment shall be supplied with bandages and disposable gloves.
SPS 50.280 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13.
SPS 50.290 SPS 50.290Procedure for exposure to blood.
SPS 50.290(1)(1) When any patron or licensee is exposed to blood by a wound or other exposure to broken skin or a mucous membrane, the licensee shall stop barbering and then comply with sub. (2) and then sub. (3), or then comply with sub. (3) and then sub. (4), or whichever are applicable, before resuming the barbering.
SPS 50.290(2) (2) Thoroughly wash the exposed area or wound on the licensee's body with soap and water, and then disinfect the exposed area or wound with a topical antiseptic such as iodine, 70% isopropyl alcohol, or 6% stabilized hydrogen peroxide or equivalent.
SPS 50.290(3) (3) Put on protective gloves.
SPS 50.290(4) (4) Thoroughly wash the exposed area or wound on the patron's body with soap and water, and then disinfect the exposed area or wound with a topical antiseptic such as iodine, 70% isopropyl alcohol, or 6% stabilized hydrogen peroxide or equivalent.
SPS 50.290 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13.
subch. III of ch. SPS 50 Subchapter III — Licensure Through School or Through Apprenticeship, Examinations, and Licensing
SPS 50.300 SPS 50.300Licensure through school.
SPS 50.300(1g)(1g)Approved schools. An applicant for licensure as a barber or a barbering manager may receive instruction in a school licensed under s. 440.62 (3) (ar), Stats., exempted under s. 440.61, Stats., or accredited by any of the following:
SPS 50.300(1g)(a) (a) National Accrediting Commission of Career Arts & Sciences (NACCAS).
SPS 50.300(1g)(b) (b) Accrediting Commission of Career Schools and Colleges (ACCSC).
SPS 50.300(1g)(c) (c) Council on Occupational Education (COE).
SPS 50.300(1g)(d) (d) National Interstate Council of State Boards of Cosmetology (NIC).
SPS 50.300(1g)(e) (e) Any other accrediting agency relating to cosmetology that is recognized by the U.S. Department of Education.
SPS 50.300(1r) (1r)General. Schools that provide instruction to students for a barber's or barbering manager's license shall develop curricula for instruction which are based on the applicable syllabus approved by the department. A school may not deviate from the hours listed for subjects in the appropriate syllabus included in this section.
SPS 50.300 Note Note: See chapters SPS 60 to 65 for requirements relating to licensing and corresponding regulation of schools of barbering.
SPS 50.300(2) (2)Barber's license syllabus. The syllabus for the barber's license is shown in Table 50.300–1. - See PDF for table PDF
SPS 50.300(3) (3)Manager's license syllabus. The syllabus for a manager's license is shown in Table 50.300–2. - See PDF for table PDF
SPS 50.300 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13; CR 15-028: cr. (1g), as renumbered, am. (1r), as renumbered, Register September 2015 No. 717, eff. 10-1-15; renum. (intro.), as created by CR 15-028, and (1) to (1g) and (1r) under s. 13.92 (4) (b) 2., Stats., cr. (1g) (title) under s. 13.92 (4) (b) 2., Stats., Register September 2015 No. 717.
SPS 50.310 SPS 50.310Licensure through apprenticeship.
SPS 50.310(1)(1)Apprenticeship applications and permits.
SPS 50.310(1)(a)(a) The owner of an establishment seeking to train an apprentice shall contact the department of workforce development or the department of safety and professional services for an apprenticeship application. The application shall be submitted to the department of workforce development.
SPS 50.310 Note Note: The apprenticeship application form is available on the Department's Web site at http://dsps.wi.gov. After receiving and processing the application form, the DWD sends the form to the Department of Safety and Professional Services.
SPS 50.310(1)(b) (b) An initial apprenticeship permit shall be issued by the department for a period of 3 years. The permit shall be extendable for one additional 1-year period upon submittal of all of the following:
SPS 50.310(1)(b)1. 1. Payment of a $10 fee.
SPS 50.310(1)(b)2. 2. Notification to the department of safety and professional services from the department of workforce development of acceptable progress by the apprentice in theory instruction and practical training.
SPS 50.310(1)(c) (c) An apprentice may not engage in any barbering work or attend school until a permit has been issued.
SPS 50.310(1)(d) (d) Each apprentice shall enter an apprenticeship contract with an establishment owner or his or her designated agent who shall employ and make arrangements for training of the apprentice in accordance with subch. II of ch. 454, Stats., and the rules of the department.
SPS 50.310 Note Note: Under section 454.26 (1) of the Statutes, every barber apprentice is also governed by section 106.01 of the Statutes and chapters DWD 295 and 296. Section 106.01 of the Statutes requires the Department of Workforce Development to also be a party to any contract under this paragraph.
SPS 50.310(1)(e) (e) The owner or his or her designated agent shall provide the apprentice with the equipment necessary to learn all phases of practical barbering as listed in sub. (3) and keep records of all apprentice practical work hours.
SPS 50.310(1)(f) (f) An apprentice seeking to transfer his or her apprenticeship contract to another establishment owner shall contact the department of workforce development or the department safety and professional services for transfer procedures. An apprentice may not transfer without prior approval of the department.
SPS 50.310(1)(g) (g) Cancellation of an apprenticeship contract by the department of workforce development shall result in an automatic suspension of an apprenticeship permit.
SPS 50.310 Note Note: The Department of Workforce Development (DWD) informs the Department of Safety and Professional Services (DSPS) whenever an apprenticeship contract is cancelled, and DSPS informs DWD whenever an apprenticeship permit is suspended.
SPS 50.310(1)(h) (h) An apprentice who has failed to complete an apprenticeship within 4 years from the date of issuance of his or her initial permit may apply for reentry into the apprenticeship program. Upon its review of the applicant's apprenticeship records, the department may deny the application or issue another apprenticeship permit under specified terms and conditions. The department may allow an apprentice credit for theory and practical training actually obtained under a previous permit.
SPS 50.310(2) (2)Apprenticeship instruction and training.
SPS 50.310(2)(a)(a) Following issuance of an apprenticeship permit, an apprentice shall enroll in the first available course of theory instruction at a school of barbering and shall maintain acceptable attendance and progress in instruction and practical training. The owner or manager shall pay the apprentice for the hours of school attendance and practical training.
SPS 50.310(2)(b) (b) Schools that provide theory instruction for apprentices shall develop a curriculum based on the subjects and theory hours in Table 50.300–1.
SPS 50.310(3) (3)Practical training.
SPS 50.310(3)(a)1.1. The establishment owner with whom an apprentice contracts shall employ a manager to train and supervise the apprentice, except as provided in subd. 2. An apprentice shall only work under the supervision of a manager, except as provided in subd. 2.
SPS 50.310(3)(a)2. 2. A manager may delegate supervisory duty to a licensed barber who has completed at least 2,000 hours of licensed practice.
SPS 50.310(3)(b) (b) Each apprentice shall receive at least 1,712 hours of training and experience in the practical services of barbering to qualify for the examination as a barber. Training and experience shall include the subjects and practical hours of training shown in Table 50.310. - See PDF for table PDF
SPS 50.310 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13; CR 15-028: am. (3) (b), r. and recr. 50.310 Table Register September 2015 No. 717, eff. 10-1-15.
SPS 50.320 SPS 50.320Transfers.
SPS 50.320(1) (1)Transfer from a school to an apprenticeship.
SPS 50.320(1)(a)(a) Any student transferring from a school to an apprenticeship program shall be granted apprenticeship credit for school hours attained, at a ratio of one student theory hour to one apprentice theory hour, and one student practical hour to one apprentice practical hour.
SPS 50.320(1)(b) (b) The department shall grant transferees to an apprenticeship program credit for calendar time spent in prior training.
SPS 50.320(2) (2)Transfer from an apprenticeship to a school. Any apprentice transferring to a school program may be granted school credit for apprenticeship hours attained. The amount of credit that is granted shall be determined by the school.
SPS 50.320(3) (3)Transfer from a cosmetology apprenticeship to a barbering apprenticeship. Any cosmetology apprentice regulated under chs. Cos 1 to 11 who transfers to a barbering apprenticeship shall be allowed to transfer all cosmetology apprenticeship hours that are related to barbering to the barbering apprenticeship, on a one-to-one basis.
SPS 50.320 Note Note: The Department of Workforce Development may grant transferees to an apprenticeship program credit for calendar time spent in prior training.
SPS 50.320 History History: EmR1302: emerg. cr., eff. 2-14-13; CR 13-026: cr. Register October 2013 No. 694, eff. 11-1-13.
SPS 50.330 SPS 50.330Examinations.
SPS 50.330(1) (1)Administration. The department may do any of the following:
SPS 50.330(1)(a) (a) Prepare, administer, or grade examinations.
SPS 50.330(1)(b) (b) Approve, in whole or in part, an examination prepared, administered, and graded by a test service provider.
SPS 50.330(2) (2)Competency testing.
SPS 50.330(2)(a)(a) The department shall determine the subject matters for each license and design the examinations to test for minimum competence in the subjects tested.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.