AB573: Bill Text

AB573,2,13 101.145 (3) (b) The owner of a residential building shall maintain any such smoke detector that is located in a common area of that residential building and any heat detector that is located in that residential building.

AB573, s. 5 Section 5. 101.145 (4) (except 101.145 (4) (title)) of the statutes is renumbered 101.145 (4) (a) and amended to read:

AB573,2,18 101.145 (4) (a) The owner of a residential building , the initial construction of which is commenced before, on, or after May 23, 1978, shall install and maintain a functional smoke detector in the all of the following locations:

AB573,3,1 1. The basement and at.

AB573,3,3 2. At the head of any stairway on each floor level of the building and shall install a functional smoke detector either in other than an attic.

AB573,3,5 3. In each sleeping area of each unit or elsewhere in the unit within 6 feet of each sleeping area and, but not in a kitchen or attic.

AB573, s. 6 Section 6. 101.145 (4) (b) of the statutes is created to read:

AB573,3,10 101.145 (4) (b) The owner of a residential building with an attic shall install a functional heat detector in the attic. The heat detector shall be approved by the department and shall be designed to activate at a fixed temperature and when the temperature rises at or above a specified rate.

AB573, s. 7 Section 7. 101.645 (title) of the statutes is amended to read:

AB573,3,12 101.645 (title) Smoke detectors and heat detectors.

AB573, s. 8 Section 8. 101.645 (2) of the statutes is amended to read:

AB573,3,16 101.645 (2) Approval and installation. A Any smoke detector or heat detector required under this section shall be approved and installed as required under s. 101.145 (2) and (3) (a).

AB573, s. 9 Section 9. 101.645 (3) of the statutes is renumbered 101.645 (3) (a).

AB573, s. 10 Section 10. 101.645 (3) (b) of the statutes is created to read:

AB573,3,22 101.645 (3) (b) The owner of a dwelling with an attic shall install a functional heat detector in the attic. The heat detector shall be approved by the department and shall be designed to activate at a fixed temperature and when the temperature rises at or above a specified rate.

AB573, s. 11 Section 11. 101.745 (title) of the statutes is amended to read:

AB573,3,24 101.745 (title) Smoke detectors and heat detectors.

AB573, s. 12 Section 12. 101.745 (2) of the statutes is amended to read:

AB573,4,2 101.745 (2) Approval. A Any smoke detector or heat detector required under this section shall be approved by underwriters laboratory.

AB573, s. 13 Section 13. 101.745 (3) of the statutes is amended to read:

AB573,4,6 101.745 (3) Installation. A Any smoke detector or heat detector required under this section shall be installed according to the directions and specifications of the manufacturer.

AB573, s. 14 Section 14. 101.745 (4) of the statutes is renumbered 101.745 (4) (a).

AB573, s. 15 Section 15. 101.745 (4) (b) of the statutes is created to read:

AB573,4,13 101.745 (4) (b) The manufacturer of a manufactured building with an attic that is manufactured on or after the effective date of this paragraph .... [revisor inserts date], shall install a functional heat detector in the attic. The heat detector shall be approved by the department and shall be designed to activate at a fixed temperature and when the temperature rises at or above a specified rate.

AB573, s. 16 Section 16. 101.925 (title) of the statutes is amended to read:

AB573,4,15 101.925 (title) Smoke detectors and heat detectors.

AB573, s. 17 Section 17. 101.925 (2) of the statutes is amended to read:

AB573,4,18 101.925 (2) Approval. A Any smoke detector or heat detector required under this section shall be approved by underwriters laboratory.

AB573, s. 18 Section 18. 101.925 (3) of the statutes is amended to read:

AB573,4,22 101.925 (3) Installation. A Any smoke detector or heat detector required under this section shall be installed according to the directions and specifications of the manufacturer.

AB573, s. 19 Section 19. 101.925 (4) of the statutes is renumbered 101.925 (4) (a).

AB573, s. 20 Section 20. 101.925 (4) (b) of the statutes is created to read:

AB573,5,5 101.925 (4) (b) The manufacturer of a manufactured home with an attic that is manufactured on or after the effective date of this paragraph .... [revisor inserts date], shall install a functional heat detector in the attic. The heat detector shall be approved by the department and shall be designed to activate at a fixed temperature and when the temperature rises at or above a specified rate.

AB573,5,6 (End)