5.15(5) (5) When a town is divided into wards, the annual town meeting and special town elections shall be held at the first ward.
5.15(6) (6)
5.15(6)(a)(a) Following any municipality-wide special federal census of population, the governing body of the municipality in which the special census was held may, by ordinance or resolution, adjust the ward boundaries, but no ward line adjustment may cross the boundary of an assembly district. The municipal clerk shall transmit copies of the ordinance or resolution in compliance with sub. (4) (b).
5.15(6)(b) (b) No later than 60 days before each September primary and general election, and no later than 30 days before each other election the governing body of any municipality may by resolution combine 2 or more wards for voting purposes to facilitate using a common polling place. Whenever wards are so combined, the original ward numbers shall continue to be utilized for all official purposes. Except as otherwise authorized under this paragraph, every municipality having a population of 35,000 or more shall maintain separate returns for each ward so combined. In municipalities having a population of less than 35,000, the governing body may provide in the resolution that returns shall be maintained only for each group of combined wards at any election. Whenever a governing body provides for common ballot boxes and ballots or voting machines, separate returns shall be maintained for each separate ballot required under ss. 5.62 and 5.64 at the September primary and general election. The municipal clerk shall transmit a copy of the resolution to the county clerk of each county in which the municipality is contained. In municipalities having a population of less than 35,000, the resolution shall remain in effect for each election until modified or rescinded, or until a new division is made under this section.
5.15(7) (7) If a new town is created or if part of a town is annexed to a city or village during a decennial period after the period for ward adjustments under sub. (1) (b), the town board of any town to which territory is attached or from which territory is detached, without regard to the time provisions of sub. (1) (b), may, by ordinance or resolution, adjust the wards in that town, but no ward line adjustment may cross the boundary of an assembly district. The town clerk shall transmit copies of the ordinance or resolution making the adjustment in compliance with sub. (4) (b).
5.15(8) (8) Until divided, all elections are held in the established wards.
5.15 Annotation City and county apportionment is discussed. City of Janesville v. Rock County, 107 Wis. 2d 187, 319 N.W.2d 891 (Ct. App. 1982).
5.15 Annotation The court properly voided the city's plan and adopted the county's plan, even though the county did not adopt the plan within 60 days of receiving census data. County of La Crosse v. City of La Crosse, 108 Wis. 2d 560, 322 N.W.2d 531 (Ct. App. 1982).
5.18 5.18 Enforcement of division requirement. If any municipality fails to comply with s. 5.15, the county in which the municipality is located or any elector of the municipality may submit to the circuit court for any county in which the municipality is located within 14 days from the expiration of the 60-day period under s. 5.15 (1) (b) a proposed plan for the division of the municipality into wards in compliance with this section. If the circuit court finds that the existing division of the municipality into wards fails to comply with s. 5.15, it shall review the plan submitted by the petitioner and after reasonable notice to the municipality may promulgate the plan, or any other plan in compliance with s. 5.15, as a temporary ward plan for the municipality to remain in effect until superseded by a ward plan adopted by the governing body in compliance with s. 5.15.
5.18 History History: 1985 a. 304 ss. 9, 11, 12.
5.25 5.25 Polling places.
5.25(1)(1) All elections under chs. 5 to 12 shall be held at the polling places provided in this section. The places chosen shall be public buildings, unless the use of a public building for this purpose is impracticable or the use of a nonpublic building better serves the needs of the electorate, as determined by the authority charged with the responsibility for establishing polling places under sub. (2).
5.25(2) (2) In cities over 500,000 population, polling shall be at the places established by the board of election commissioners. In all other cities and in villages and towns, polling shall be at the places established by the governing body.
5.25(3) (3) Polling places shall be established for each September primary and general election at least 60 days before the election, and for each other election at least 30 days before the election.
5.25(4) (4)
5.25(4)(a)(a) Each polling place shall be accessible to elderly and handicapped individuals.
5.25(4)(c) (c) The board may exempt a polling place from the requirement of par. (a) in accordance with guidelines prescribed by rule of the board.
5.25(4)(d) (d) No later than June 30 of each odd-numbered year, the board shall submit a report on impediments to voting faced by elderly and handicapped individuals to the appropriate standing committees of the legislature under s. 13.172 (3). In preparing its report under this paragraph, the board shall consult with appropriate advocacy groups representing the elderly and handicapped populations.
5.25(5) (5)
5.25(5)(a)(a) Except as authorized in par. (b), all electors within a ward shall vote at the same polling place.
5.25(5)(b) (b) The municipal clerk or board of election commissioners of a municipality in which an elderly or handicapped elector resides may reassign the elector to a polling place within the municipality other than the polling place serving the elector's residence in order to permit the elector to utilize a polling place that is accessible to elderly or handicapped individuals.
5.25(5)(c) (c) The electors of more than one ward in the same municipality may vote at a single polling place.
5.35 5.35 Polling place requirements.
5.35(1) (1)National flag. On election days, every polling place shall properly display the national flag during all hours the polls are open.
5.35(2) (2)Voting booths. There shall be one voting booth for every 200 electors who voted at the last general election. The booths shall have a surface on which to write or work and be sufficiently enclosed to assure privacy for the elector and anyone lawfully assisting the elector while marking the elector's ballot.
5.35(3) (3)Ballot boxes. Where the voting procedure makes it necessary, there shall be a separate ballot box for each form of ballot at each polling place. There shall be a suitable lock and key for each, and an opening no larger than is sufficient to receive a single ballot or a single folded ballot if the box is used for deposit of paper ballots. If the electors of more than one ward use the same polling place, there shall be separate ballot boxes provided for the electors of each ward, unless combined ballot boxes are authorized in accordance with s. 5.15 (6) (b).
5.35(4) (4)Layout; organization. All voting booths and machines shall be placed apart from other activities in the polling place, with their exteriors in full view of the election officials. Only the proper election officials, persons observing the proceedings under s. 7.41, persons assisting voters under s. 6.82 (2) and electors receiving, preparing or depositing their ballots or casting their votes on the machines are permitted in the voting area. Except where assistance is authorized, only one elector at a time is permitted in a voting booth or machine.
5.35(5) (5)Activities restricted. No polling place may be situated so as to interfere with or distract election officials from carrying out their duties. The municipal clerk and election inspectors shall prevent interference with and distraction of electors at polling places.
5.35(6) (6)Posting requirements.
5.35(6)(a)(a) At each polling place in the state, the municipal clerk or board of election commissioners shall post the following materials, positioned so that they may be readily observed by electors entering the polling place or waiting in line to vote:
5.35(6)(a)1. 1. The relevant portions of the voting instructions in the type B notice for the election as specified in s. 10.02 (3) and, for each referendum on the ballot, the text of the type C notice specified in s. 10.01 (2) (c).
5.35(6)(a)2. 2. A copy of the election fraud laws provided in s. 12.13 (1) and (3) (intro), (d), (f), (g), (k), (L), (o), (q), (r), (u), (v) and (x), together with the applicable penalties provided in s. 12.60 (1).
5.35(6)(a)3. 3. Two sample ballots prepared under s. 5.66 (2).
5.35(6)(a)5. 5. Any other voting information directed to be posted by the board.
5.35(6)(b) (b) At each polling place in the state where a consolidated ballot under s. 5.655 is used or an electronic voting system is utilized at a partisan primary election incorporating a ballot upon which electors may mark votes for candidates of more than one recognized political party or for candidates of a recognized political party and independent candidates, the municipal clerk or board of election commissioners shall prominently post a sign in the form prescribed by the board warning electors in substance that on any ballot with votes cast for candidates of more than one recognized political party or any ballot with votes cast for candidates of a recognized political party and independent candidates, no votes cast for any candidates for partisan office will be counted unless a preference for a party or for the independent candidates is made. If the elector designates a preference, only votes cast for candidates of that preference will be counted.
5.37 5.37 Voting machine requirements.
5.37(1) (1) Voting machines shall give every elector a reasonable opportunity to vote for any person for any office and on any proposition the elector is entitled to vote on, assure privacy to the elector so no one will know how the elector is voting or has voted, preclude the electors from voting for persons or propositions upon which they are not entitled to vote and from voting more than once for the same office or on the same proposition. Voting machines shall be constructed to lock so they cannot be manipulated, tampered with, or show the number of votes registered for any candidate or proposition while voting is in progress. The machines shall provide a method for electors to vote a straight party ticket, shall permit voting a split ticket and shall record each vote cast.
5.37(2) (2) When 2 or more wards or aldermanic districts are joined to use a voting machine, under s. 5.15 (6) (b), the machine shall be constructed to allow the electors to vote for all nominated candidates and issues for their aldermanic district or ward, but for no other.
5.37(3) (3) For presidential electors one device shall be provided to vote for all of one party's electoral candidates at the same time. The device shall be opposite or adjacent to the names of the party's candidates for president and vice president.
5.37(4) (4) Voting machines may be used at primary elections when they comply with subs. (1) and (2) and the following provisions: All candidates' names entitled to appear on the ballots at the primary shall appear on the machine; the elector cannot vote for candidates of more than one party, whenever the restriction applies, and an elector who votes for candidates of any party may not vote for independent candidates at the September primary; the elector may secretly select the party for which he or she wishes to vote, or the independent candidates in the case of the September primary; the elector may vote for as many candidates for each office as he or she is lawfully entitled to vote for, but no more.
5.37(5) (5) Polling places may have more than one voting machine.
5.37 Annotation State action in presidential candidate selection. 1976 WLR 1269.
5.40 5.40 Use of voting machines or systems.
5.40(1) (1) Except as permitted in sub. (3) or as required in subs. (4) to (6), the governing body or board of election commissioners of every municipality with a population of 10,000 or more before July 1, 1995, or of 7,500 or more thereafter shall require the use of voting machines or electronic voting systems in every ward in the municipality at every election. Any other governing body or board of election commissioners may adopt and purchase voting machines or electronic voting systems for use in any ward in the municipality at any election.
5.40(2) (2) Only voting machines complying with s. 5.37 or electronic voting systems approved under s. 5.91 may be used in an election in this state.
5.40(3) (3) Notwithstanding sub. (1), any municipality may elect to utilize paper ballots and voting booths instead of voting machines or an electronic voting system:
5.40(3)(a) (a) For any territory which is included in a portion of a congressional district, legislative district, county supervisory district, school district, technical college district, sewerage district or sanitary district contained within the municipality for so long as the number of electors residing in the territory does not exceed 100.
5.40(3)(b) (b) Whenever the municipality is precluded under s. 7.23 (2) from clearing the recorders on a sufficient number of voting machines to serve the electors at the election.
5.40(3)(c) (c) Whenever such action is authorized under s. 7.15 (6).
5.40(3)(d) (d) Whenever the municipal clerk or board of election commissioners reassigns an elector to a polling place other than the one serving the elector's residence under s. 5.25 (5) (b).
5.40(4) (4) Notwithstanding sub. (1), a municipality which utilizes voting machines at a polling place shall not utilize a voting machine to receive the ballot of an elector who receives assistance under s. 6.82 (1) (a) or whose vote is challenged under ss. 6.92 to 6.94.
5.40(5) (5) A municipality which utilizes voting machines at a polling place shall not utilize the machines to receive the vote of an elector who declares to the chief inspector that, due to physical disability, the elector is unable to depress a button or lever on a machine.
5.40(5m) (5m) Notwithstanding sub. (1), the governing body of a municipality which uses voting machines or an electronic voting system may petition the board for permission to use paper ballots and voting booths for a specific election, and the board may grant such a request.
5.40(6) (6) A municipality which utilizes voting machines or an electronic voting system at a polling place may permit use of the machines or system by electors voting under s. 6.15 only as authorized under s. 6.15 (3) (b).
5.40(7) (7) Whenever a municipality adopts and purchases voting machines or an electronic voting system, or adopts and purchases a different type of voting machine or electronic voting system from the type it was previously using, the municipal clerk or executive director of the municipal board of election commissioners shall promptly notify the county clerk or executive director of the county board of election commissioners and the executive director of the elections board in writing.
subch. II of ch. 5 SUBCHAPTER II
BALLOT FORM
5.51 5.51 General provisions.
5.51(1)(1) The type face used on all paper ballots shall be easy to read, and the type size may be no smaller than 8 point.
5.51(2) (2) The paper used for ballots shall be 35 pounds per ream for sheets 24 inches by 36 inches. If a different size sheet is used, the weight per ream shall be proportioned accordingly, but shall meet this standard. This subsection does not apply to ballots used with electronic voting systems.
5.51(3) (3) All paper ballots shall be of sufficient width and length to provide space for all matter required to be printed on them. Except on ballots used with electronic voting systems, all ballot columns shall be separated by lines at least one-eighth inch in width.
5.51(4) (4) No stickers may be placed on a ballot by election officials except under s. 7.37 (6). Any other stickers applied by them shall not be counted.
5.51(5) (5) Each official ballot shall be printed on paper of uniform color. Different colors shall be used to distinguish office and referendum ballots and different colors may be used to distinguish separate ballots for different offices. Sample ballots shall be printed on a different color paper than the official ballots, and need not have the endorsement and certificate.
5.51(6) (6) All candidates' names for the same office shall be placed, projected or composed on the ballot in the same size, style and color of type. The style and size of type shall conform substantially to the official ballot forms prescribed by the board under s. 7.08 (1) (a).
5.51(7) (7) In partisan primary elections, all ballots shall be of uniform color and size, and the same type of paper shall be used for all ballots.
5.51(8) (8) Unless otherwise specifically provided, the form of all ballots shall conform to the ballot forms prescribed by the board under s. 7.08 (1) (a).
5.52 5.52 Multi-candidate elections. If more than one individual is to be elected to the same office from the same jurisdiction or district, the ballot shall provide at the top of the column or to the right of the row for that office: "Vote for not more than .... candidates.".
5.52 History History: 1985 a. 304.
5.53 5.53 Voting machine ballots.
5.53(1) (1) Voting machine ballots shall be placed, projected or composed on a board or screen inside the machine, under s. 5.64 and may be arranged in either columns or rows. The type face shall be easy to read, and the type size may be no smaller than 8 point.
5.53(2) (2) Where separate ballots are provided for, the names or questions shall be placed in separate columns or rows upon the machines so they are voted on separately, except as otherwise provided for referenda under s. 5.64 (2) (c).
5.53 History History: 1979 c. 260, 311; 1981 c. 377 ss. 4, 5; 1999 a. 182.
5.54 5.54 Notice to electors. Every ballot, except a voting machine ballot, shall bear substantially the following information on the face: "Notice to electors: This ballot may be invalid unless initialed by 2 election inspectors. If cast as an absentee ballot, the ballot must bear the initials of the municipal clerk or deputy clerk."
5.55 5.55 Ballot identification. On every ballot, except a voting machine ballot, shall be printed "Official .... Ballot" or "Official .... Ballot for ...." followed by the designation of the polling place for which the ballot has been prepared, the date of the election, and the official endorsement and blank certificates. The number of the ward or wards or aldermanic district, if any, and the name of the municipality may be omitted in printing and stamped or written on the ballots at any location which is clearly visible at the option of the county clerk. Printed information and initials shall appear on the back and outside of the ballot.
5.55 History History: 1985 a. 304; 1997 a. 250; 1999 a. 182; 2001 a. 16.
5.56 5.56 Multiple columns and rows. Whenever the number of candidates for any office requires the use of more than one row or column on a voting machine or whenever the official or agency having the responsibility to determine ballot positions determines that the number of candidates for an office requires the use of more than one column on a ballot, the official or agency having such responsibility shall require that the rows or columns be rotated in such a manner that all rows are positioned on top, or all columns are positioned to the left, in an equal number of wards or election districts. If the number of wards and election districts in which voting for an office is conducted is not equally divisible, the position of the rows or columns in the remaining wards or election districts shall be determined by the official or agency by the drawing of lots. The number of columns or rows shall be determined at the same time that the positions of the candidates' names are determined for each primary and election.
5.56 History History: 1981 c. 377 s. 5.
5.58 5.58 Spring primary ballots. At spring primary elections the following ballots, when necessary, shall be provided for each ward, except as authorized in s. 5.655. Only nonpartisan candidates nominated for office by nomination papers shall have their names placed on the official spring primary ballot under the proper office designation, but the ballots shall allow room for write-in candidates.
5.58(1) (1)Municipal; county supervisor ballots. There shall be separate ballots for municipal and county primaries, except as authorized in s. 5.655.
5.58(1)(a) (a) For all cities the official spring primary ballot shall be arranged by the municipal clerk, using the same method as that used by the board under s. 5.60 (1) (b).
5.58(1)(c) (c) Towns and villages holding a primary under s. 8.05 shall arrange the ballot in accordance with the form prescribed by the board under s. 7.08 (1) (a), which shall be the same form as provided in s. 5.60 (5) and (6), insofar as possible.
5.58(1c) (1c)Municipal judge. There shall be a separate ballot for municipal judges if they are elected under s. 755.01 (4), except as authorized in s. 5.655. Arrangement of the names on the ballot shall be determined by the county clerk or the executive director of the county board of election commissioners of the county having the largest portion of the population in the jurisdiction served by the judge.
Loading...
Loading...
This is an archival version of the Wis. Stats. database for 2001. See Are the Statutes on this Website Official?