167.31(4)(bt)5. 5. The vehicle is being operated entirely on private property and is not being operated in the right-of-way of any highway.
167.31(4)(c) (c) Subsection (2) (b) and (c) does not apply to the holder of a Class A or Class B permit under s. 29.193 (2) who is hunting from a stationary vehicle.
167.31(4)(cg) (cg) A holder of a Class A or Class B permit under s. 29.193 (2) who is hunting from a stationary vehicle may load and discharge a firearm or shoot a bolt or an arrow within 50 feet of the center of a roadway if all of the following apply:
167.31(4)(cg)1. 1. The roadway is part of a county highway, a town highway or any other highway that is not part of a street or of a state trunk or federal highway.
167.31(4)(cg)2. 2. The vehicle is located off the roadway and is not in violation of any prohibition or restriction that applies to the parking, stopping or standing of the vehicle under ss. 346.51 to 346.55 or under a regulation enacted under s. 349.06 or 349.13.
167.31(4)(cg)3. 3. The holder of the permit is not hunting game to fill the tag of another person.
167.31(4)(cg)4. 4. The holder of the permit has obtained permission from any person who is the owner or lessee of private property across or on to which the holder of the permit intends to discharge a firearm or shoot a bolt or an arrow.
167.31(4)(cg)5. 5. The vehicle bears special registration plates issued under s. 341.14 (1), (1a), (1e), (1m) or (1r) or displays a sign that is at least 11 inches square on which is conspicuously written "disabled hunter".
167.31(4)(cg)6. 6. The holder of the permit discharges the firearm or shoots the bolt or arrow away from and not across or parallel to the roadway.
167.31(4)(cm) (cm) For purposes of pars. (c) and (cg), the exemption from sub. (2) (b) under these paragraphs only applies to the firearm, bow or crossbow being used for hunting by the holder of the Class A or Class B permit under s. 29.193 (2).
167.31(4)(co) (co) For purposes of par. (cg), a person may stop a vehicle off the roadway on the left side of the highway.
167.31(4)(cr) (cr) For purposes of par. (cg) 4., "private property" does not include property leased for hunting by the public, land that is subject to a contract under subch. I of ch. 77, or land that is subject to an order designating it as managed forest land under subch. VI of ch. 77 and that is not designated as closed to the public under s. 77.83 (1).
167.31(4)(d) (d) Subsection (2) (b) does not prohibit a person from leaning an unloaded firearm against a vehicle.
167.31(4)(e) (e) Subsection (2) (d) does not apply to a person who is legally hunting small game with a muzzle-loading firearm or with a shotgun loaded with shotshell or chilled shot number BB or smaller, if the surface of the highway or roadway is anything other than concrete or blacktop.
167.31(4)(f) (f) Subsection (2) (d) does not prohibit a person from possessing a loaded firearm within 50 feet of the center of a roadway if the person does not violate sub. (2) (b) or (c).
167.31(4)(g) (g) A person who is fishing with a bow and arrow may shoot an arrow from a bow within 50 feet of the center of a roadway if the person does not shoot the arrow from the roadway or across a highway.
167.31(4)(h) (h) Subsection (3m) does not apply to any of the following who discharge a firearm in the direction of a transmission facility:
167.31(4)(h)1. 1. A member of the armed forces in the line of duty.
167.31(4)(h)2. 2. A member of the national guard in the line of duty.
167.31(4)(h)3. 3. A peace officer in the line of duty.
167.31(4)(h)4. 4. A private security person who meets all of the requirements under par. (a) 4.
167.31(4m) (4m)Rules. The department of natural resources may further restrict hunting from stationary vehicles on county or town highways by promulgating rules designating certain county and town highways, or portions thereof, upon which a holder of a Class A or Class B permit issued under s. 29.193 (2) may not discharge a firearm or shoot a bolt or an arrow from a bow or crossbow under sub. (4) (cg). For each restriction of hunting from a county or town highway contained in a rule to be promulgated under this subsection, the department shall submit a specific justification for the restriction with the rule submitted to legislative council staff for review under s. 227.15 (1).
167.31(5) (5)Weapons surcharge.
167.31(5)(a)(a) If a court imposes a fine or forfeiture for a violation of this section, the court shall also impose a weapons surcharge under ch. 814 equal to 75% of the amount of the fine or forfeiture.
167.31(5)(b) (b) If a fine or forfeiture is suspended in whole or in part, the weapons surcharge shall be reduced in proportion to the suspension.
167.31(5)(c) (c) If any deposit is made for an offense to which this subsection applies, the person making the deposit shall also deposit a sufficient amount to include the weapons surcharge under this subsection. If the deposit is forfeited, the amount of the weapons surcharge shall be transmitted to the secretary of administration under par. (d). If the deposit is returned, the amount of the weapons surcharge shall also be returned.
167.31(5)(d) (d) The clerk of the circuit court shall collect and transmit to the county treasurer the weapons surcharge as required under s. 59.40 (2) (m). The county treasurer shall then pay the secretary of administration as provided in s. 59.25 (3) (f) 2. The secretary of administration shall deposit all amounts received under this paragraph in the conservation fund to be appropriated under s. 20.370 (3) (mu).
167.31 Cross-reference Cross Reference: See also ss. NR 10.001, 10.05, and 10.07, Wis. adm. code.
167.32 167.32 Safety at sporting events.
167.32(1) (1)Definitions. In this section:
167.32(1)(a) (a) "Alcohol beverages" means fermented malt beverages and intoxicating liquor.
167.32(1)(b) (b) "Facility" means building or stadium.
167.32(1)(c) (c) "Fermented malt beverages" has the meaning designated in s. 125.02 (6).
167.32(1)(d) (d) "Intoxicating liquor" has the meaning designated in s. 125.02 (8).
167.32(1)(e) (e) "Passing" includes pushing, pulling, throwing and moving.
167.32(1)(f) (f) "Sports facility" means a facility where sporting events are held, regardless of whether that is the exclusive use of the facility.
167.32(2) (2)Body passing.
167.32(2)(a)(a) A spectator at a sporting event at a sports facility shall not participate in the process of passing another person above the floor or ground from one location to another.
167.32(2)(b) (b) Paragraph (a) does not apply to the act of a person moving another person in order to render first aid or otherwise assist or care for that other person.
167.32(3) (3)Object passing. A spectator at a sporting event at a sports facility shall not participate in the process of passing bleachers, seats or other objects in a manner which threatens the safety of other persons.
167.32(4) (4)Alcohol consumption.
167.32(4)(a)(a) A spectator shall not bring alcohol beverages into a sports facility where there is a sporting event at the sports facility.
167.32(4)(b) (b) A spectator shall not possess or consume alcohol beverages at a sporting event at a sports facility if the alcohol beverages were brought to the facility as specified in par. (a).
167.32(4)(c) (c) This subsection does not apply to any vendor or other person who brings alcohol beverages into a sports facility with the authorization of the person in charge of the facility.
167.32(5) (5)Forfeiture. Any person who violates sub. (2), (3) or (4) shall forfeit $50.
167.32(6) (6)Citation procedure. The state may use the citation procedures under s. 778.25 to enforce this section. A county or municipality may use the citation procedures under s. 778.25 to enforce a local ordinance strictly conforming to this section.
167.32 History History: 1985 a. 254.
167.35 167.35 Fire safety performance standards for cigarettes.
167.35(1)(1)Definitions. In this section:
167.35(1)(a) (a) "Cigarette" means any roll of tobacco wrapped in paper or in any substance other than tobacco.
167.35(1)(b) (b) "Department" means the department of commerce unless the context requires otherwise.
167.35(1)(c) (c) "Direct marketer" has the meaning given in s. 139.30 (2n).
167.35(1)(d) (d) "Distributor" has the meaning given in s. 139.30 (3).
167.35(1)(e) (e) "Jobber" has the meaning given in s. 139.30 (6).
167.35(1)(f) (f) "Manufacturer" means any of the following:
167.35(1)(f)1. 1. Any person who manufactures or otherwise produces cigarettes anywhere or causes cigarettes to be manufactured or produced anywhere, if the person intends that the cigarettes are to be sold in this state, including cigarettes that are sold in the United States through an importer.
167.35(1)(f)2. 2. The first purchaser anywhere that intends to resell in the United States cigarettes that are manufactured anywhere, if the original manufacturer or producer did not intend that the cigarettes be sold in the United States.
167.35(1)(f)3. 3. Any entity that becomes a successor to a person described in subd. 1. or a purchaser described in subd. 2.
167.35(1)(g) (g) "Repeatability" means the range of values within which the repeat results of cigarette test trials from a single laboratory will fall 95 percent of the time.
167.35(1)(h) (h) "Retailer" has the meaning given in s. 134.66 (1) (g).
167.35(1)(i) (i) "Sell" or "sale" has the meaning given in s. 139.30 (12).
167.35(2) (2)Certification filed by manufacturers.
167.35(2)(a)(a) Each manufacturer that sells or offers to sell cigarettes in this state shall file a written certification with the department, certifying that each type of cigarette listed in the certification has been tested in accordance with sub. (3) and complies with the applicable fire safety performance standard under sub. (3).
167.35(2)(b) (b) For each type of cigarette listed in the certification, all of the following information shall be included in the certification:
167.35(2)(b)1. 1. The brand or trade name that appears on the package.
167.35(2)(b)2. 2. The style of the cigarette, such as light or ultra-light.
167.35(2)(b)3. 3. The length in millimeters.
167.35(2)(b)4. 4. The circumference in millimeters.
167.35(2)(b)5. 5. Any flavor description for the cigarette.
167.35(2)(b)6. 6. Whether the cigarette is filter or nonfilter.
167.35(2)(b)7. 7. The type of individual container in which the cigarette is packaged, such as a soft pack or a box.
167.35(2)(b)8. 8. A description of the marking required under sub. (4).
167.35(2)(b)9. 9. The name, address, and telephone number of the laboratory conducting the testing of the cigarette as required under sub. (3), if the laboratory is not owned and operated by the manufacturer of the cigarette.
167.35(2)(b)10. 10. The date on which the testing required under sub. (3) occurred.
167.35(2)(c) (c) Upon filing a certification under par. (a), a manufacturer shall provide a copy of the certification to each distributor, jobber, or direct marketer that purchases from the manufacturer cigarettes that are the subject of the certification. Each manufacturer shall also provide to each distributor, jobber, and direct marketer sufficient copies of an illustration of the package marking required under sub. (4) to be given to each retailer to whom the distributor, jobber, or direct marketer sells cigarettes.
167.35(2)(d) (d) Each manufacturer shall file the certification under par. (a) with the department every 3 years.
167.35(2)(e) (e) The department shall promptly forward a copy of each certification it receives under par. (a) to the attorney general.
167.35(2)(f) (f) Each manufacturer shall pay to the department a fee of $1,000 for each brand family of cigarette listed in each certification filed with the department under par. (a). The fee shall apply to all cigarettes within the brand family and shall include any new cigarette that is included in the 3-year certification period for which the fee is paid. The manufacturer shall pay the fee upon filing each certification for a new brand family.
167.35(2)(g) (g) If a manufacturer has certified a type of cigarette pursuant to this subsection, and makes any change after the certification to that type of cigarette that is likely to alter its compliance with the applicable fire safety performance standard, no person may offer for sale or sell that type of cigarette in this state unless the manufacturer retests the cigarette in accordance with the applicable testing method under sub. (3) (a) or (d) and maintains the reports of that testing as required under sub. (3) (f).
167.35(3) (3)Test methods; performance standards.
167.35(3)(a)(a) Method of testing. For purposes of this section, testing of cigarettes conducted by a manufacturer or conducted or sponsored by the state shall meet all of the following requirements:
167.35(3)(a)1. 1. The testing shall be conducted in accordance with the standard test method for measuring the ignition strength of cigarettes established by the American Society for Testing and Materials International standard E2187-04. The department may adopt a substitute test method that is different from the standard test method, if the department finds that the substitute test method does not result in a change in the percentage of full-length burns exhibited by any tested cigarette when compared to the percentage of full-length burns the same cigarette would exhibit when tested in accordance with the standard test method.
167.35(3)(a)2. 2. The testing shall be conducted on 10 layers of filter paper.
167.35(3)(a)3. 3. The fire safety performance standard under this subsection shall be applied only to a complete test trial, which shall consist of 40 replicate tests for each cigarette tested.
167.35(3)(a)4. 4. Each laboratory conducting the testing shall implement a quality control and quality assurance program that meets the requirements under par. (b) and that includes a procedure that will determine the repeatability of the results from the testing. The repeatability value may not be greater than 0.19.
167.35(3)(a)5. 5. Each laboratory conducting the test under this subsection shall be accredited pursuant to the standard ISO/IEC 17025 of the International Organization for Standardization or other comparable accreditation standard required by the department.
167.35(3)(b) (b) Quality control and quality assurance program. For purposes of par. (a) 4., a quality control and quality assurance program shall include a laboratory procedure that ensures all of the following:
167.35(3)(b)1. 1. That operator bias, systematic and nonsystematic methodological errors, and equipment-related problems do not affect the results of the testing.
Loading...
Loading...
This is an archival version of the Wis. Stats. database for 2007. See Are the Statutes on this Website Official?